Milliput - Terracotta - 113g Stick
G-MP804
£5.00 GBP
Milliput Terracotta - 113g Stick - G-MP804
This Terracotta epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
>>> To truly smooth out your Milliput, apply Methylated Spirits with an old brush, the putty can also be thinned to a paint like consistency in this way for use filling or covering very light cracks. <<<
Related Items
AK Interactive - 20ml Modelling Putty
£5.00 GBP
This high quality acrylic putty is a water based one component polyurethane product designed for modelling. Comes in two variants - extra hard white putty and grey putty of standard hardness. It is a superfine filler with excellent adhesive and sanding properties. The product is water based and does not contain strong smelling chemicals. Does not shrink with drying. Can be cleaned off with water.
Variants:
AK00103 Modelling White Putty - Extra Hard, 20ml/39 gr.
AK00104 Modelling Grey Putty - Standard hardness, 20ml/39 gr.
AK Interactive - 35ml Damp Earth
Sold Out
This colour makes itself at home in southern Europe, although it can be used for other places around the world. When its dry this product has a satin effect which helps recreate wet or damp earth. It can be applied using washes over your model or mixed with plaster to give volume to mud effects.
35ml bottle.
AK Interactive - 35ml Dark Mud
£5.00 GBP
This is an enamel product designed for recreating natural dark mud. You can mix this product with plaster to achieve ultra realistic results or apply it directly to your vehicle wheels, tracks and hull. The product can be mixed with other AK Interactive colours.
AK Interactive - 35ml Dark Streaking Grime
£5.00 GBP
This enamel product is intended for creating streaking effects on scale model vehicles. This is the darkest colour in the AK Interactive range for this purpose, perfect for using on dark coloured vehicles and surfaces. Suitable for a variety of WWII Allied vehicles painted in green, for example Shermans or T-34's, as well as modern vehicles. This product can also be used for achieving other effects such as adding a rich chrome finish to any surface.
AK Interactive Streaking Grime is also available in a lighter colour here
How to apply:
Shake the bottle well before use. Apply with a fine pointed brush in vertical lines starting from the top. Leave the product to dry for about 10 minutes. Using a flat brush, apply AK Interactive White Spirit onto the streaks by swiping over them. This will soften the effect and create a natural look.
View full instructions from AK Interactive here
Includes: 1 x 35 ml bottle
© 2025 Panzer Models. Prepared by Article.
