Diorama building kit #1
00045
Sold Out
Starter set for creating a diorama base, includes:
1x Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml1 x 130g Bag of Amaco Plaster Sculptamold Modelling Compound White
1 x Blue Styrofoam Sheet (20mm thick, A4 sized)
1 x Milliput Modelling Clay - Standard
Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Suitable for paper craft projects
Is quick-drying for multiple coats build up and dries clear
Can be sanded to a smooth finish
Cleans up easily while wet with soap and water
Non-toxic and water-based
130g Bag of Amaco Plaster Sculptamold Modelling Compound White
Non-toxic and acid free
Made in USA
Designed for easy usage and storage
A modelling and casting compound for all ages. Finished objects are lightweight and extremely durable. This compound mixes easily and quickly with water and models like clay but sets like plaster in 30 minutes. It adheres to most clean surfaces and can be oven dried at 200 degrees. When dry Sculptamold can be sanded sawed carved or nailed without chipping.
Blue Styrofoam Sheet (20mm, A4 Sized)
Ideal for diorama bases, can be glued, cut or shaped with heat. High density modelling foam.
Milliput Modelling Clay - Standard (Yellow/Grey)
Comes in packs containing 2 x 56·7gm. Sticks and the general instructions for preparation and usage are the same.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
Related Items
AK Interactive Diorama Series - Terrains 250ml
£10.00 GBP
AK Interactive Terrains are acrylic products designed for creating textures in dioramas. It is easy to achieve great results in both thin and thick layers. These products can be diluted with water or acrylic thinner to improve the flow. The recommended drying time is 24 hours.
Snow texture is designed for creating snow effects on any surface – terrain, vehicles or buildings.
Asphalt and Concrete textures have a grey shade similar to that of roads, asphalt covered surfaces, runways and concrete buildings.
Dry, Wet and Muddy ground textures are intended for recreating dry or wet soil and mud. In order to create track marks, press the wheels or tracks onto the surface before it dries.
Dark Earth is perfect for recreating rich dark shades of earth on diorama bases where a thick and dense texture is desired. Light Earth texture is designed for lighter shades of earth.
Beach Sand is a fine and flat texture for recreating beach areas such as the beaches of Normandy. Desert Sand is suitable for any type of desert scene, for example North Africa. It can be shaped when wet and is very useful for making dunes.
Available options:
8011 AK Interactive Terrains - Snow, 250ml
8013 AK Interactive Terrains - Asphalt, 250ml
8014 AK Interactive Terrains - Concrete, 250ml
8015 AK Interactive Terrains - Dry Ground, 250ml
8016 AK Interactive Terrains - Wet Ground, 250ml
8017 AK Interactive Terrains - Muddy Ground, 250ml
8018 AK Interactive Terrains - Dark Earth, 250ml
8019 AK Interactive Terrains - Beach Sand, 250ml
8020 AK Interactive Terrains - Desert Sand, 250ml
8021 AK Interactive Terrains - Light Earth, 250ml
8022 AK Interactive Terrains - Sandy Desert, 250ml
8023 AK Interactive Terrains - Neutral Texture - Earth, 250ml
AK Interactive Diorama Series - Acrylic Puddles 60ml
£5.50 GBP
This slightly tinted liquid crystalline product is designed for replicating small puddles and standing dirty water in your dioramas and vignettes.
Apply the product in thin layers, no more than 3mm at a time. It is self levelling and capable of flowing over uneven surfaces. In order to create a thicker layer, build up thin layers. Puddles are easy to handle with a brush.
High quality acrylic product.
Includes: AK Interactive Puddles, 60ml
Miniart 1:35 German Tank Crew Winter, Special Edition
£14.00 GBP
Miniart 1:35 - German Tank Crew Winter, Special Edition - Plastic Figure Model Kit #35249
This kit contains parts for the assembly of five WWII German tank crew members in winter uniforms. Weapons and accessories are provided.
View instructions and full contents of this kit here
The kit contains 80 parts.
Box: 260mm x 162mm x 35mm
Master Box 1:35 - German Infantry, 1941-1942, Cold Wind
£14.00 GBP
Master Box 1:35 German Infantry, 1941-1942, Cold Wind - Plastic Figure Model Kit #35103
The kit represents WWII German soldiers in winter uniform. Includes parts for the assembly of five figures. Glue and paint are not included.
© 2025 Panzer Models. Prepared by Article.
