MIN35077
Sold Out
Miniart 1:35 - Daimler Dingo British Scout Car Mk III w/Crew - Plastic Model Kit #35077
The Dingo was a British light two-man armoured car, relatively low and wide enough to have the required stability for fast off-road rides. Its initial armour was thin, just enough to stand against infantry ordnance. At the Army’s request, it was thickened, reaching 30mm (1.18 in) on the front nose and glacis. Deflecting armoured sloped panels were welded all around the central framework. The front driving compartment had four opening hatches. The engine was the regular Daimler 6-cyl 2.5 l 55 hp (41 kW), fed by a 300 l (79.25 gal) gasoline reserve (two tanks), which gave an incredible long range for its small size. The transmission consisted of a pre-selector gearbox, fluid flywheel, five forward gears and five reverse gears, allowing steering with all four wheels. This feature gave the Dingo a very tight turning radius, only 7m (23 ft), but the system was tricky to master for inexperienced drivers, so a more conventional design with front-wheel steering was chosen for the Mk.II.
During the course of wartime production, it appeared that the flat bottom plate, which allowed the crossing of uneven ground, was highly vulnerable to mines. The rubber tires were of the run-flat semi-solid type, so no spares were carried, but their toughness was compensated by the massive vertical coil springs, to give a smooth ride. There was a swiveling seat next to the driver, for a machine-gun servant/radio operator, equipped with a N°19 wireless radio set. The base armament was a removable cal. 0.303 (7.7 mm) Bren gun, with a dozen spare magazines. This armament could be swapped over for a heavier Boys antitank rifle (cal 0.55 in/14 mm). This gave the vehicle, which was fast and well-protected, with a good engine and low profile, a real advantage against all sorts of light vehicles, making it perfectly suited for reconnaissance and liaison missions.
The Dingo was produced from 1939 to 1945, and remained virtually unaltered.
The Mark I had a flexible sliding roof and the all-wheel steering. It was difficult to handle for inexperienced drivers.
The Mark IA was a sub-variant equipped with a folding roof.
The Mark IB had a reverse cooling air flow and new armored grilles for the radiator, allowing better ventilation. The bulk of these vehicles served in the Libyan desert.
The Mark II had a revised steering system, using only the front wheels. The lighting equipment was modernised, altogether with the Mark IB modification range.
The Mark III was the final version, coming in 1944 with a waterproof ignition system and no roof at all.
The kit contains 262 parts.
Includes parts for one armoured car and three figures.
Box: 345mm x 240mm x 60mm
£19.00 GBP
This set of six acrylic colours allows you to paint the sand coloured schemes of the vehicles recently deployed in Afghanistan and Iraq. The set includes the gray-sand used by U.S. troops, the yellow-sand of the British Army, the Iraqi army sand colour and three colours of the Bundeswehr camouflage in desert theaters. The colours of each bottle correspond to the actual colour, with a little modification for scale effect.
These acrylic paints are suitable for both brush and airbrush. They are odourless and water soluble. The special AK Interactive formula prevents paints from clogging in the airbrush.
Includes:
6 x 17ml bottles
AK725 New Iraqui Army Sand
AK726 British Sand Yellow
AK122 OIF & OEF US Vehicles base colour
AK727 RAL 8031 F9 German sand brown
AK728 RAL 8031 F9 German sand beige
AK729 RAL 7050 F7 German grey beige
£19.00 GBP
The Caunter Scheme 1940-1941 is a set of six acrylic paints essential for painting British vehicles used in the African and Mediterranean campaigns of that period. These acrylic paints are suitable for both brush and airbrush use, and they are soluble in water, meaning that you will not have odours as you would experience with the more aggressive, solvent-based paints. The new formula of AK-Interactive acrylics prevents problems with paints drying in the airbrush and causing potential blockages. A profile guide is printed on the backside of the box.
Includes: AK4031 BSC. Nº 64 Portland Stone, AK4032 BSC. Nº 28 Silver grey, AK4033 BSC. Nº 34 Slate, AK4034 BSC. Nº 61 Light stone, AK4035 Khaki green Nº3 (New sevice colour), AK4036 BSC. Nº 49 Purple Brown
£14.50 GBP
Master Box 1:35 British Infantry in action, Northern Africa, WWII era - Plastic Figure Model Kit #3580
The kit represents British infantrymen attacking the enemy in the African desert. Includes parts for the assembly of five figures. Glue and paint are not included.
£12.00 GBP
Master Box 1:35 Allied Forces, WWII, North Africa desert battles series - Plastic Figure Model Kit #3594
Includes parts for the assembly of five figures. Glue and paint are not included.