All
Meng Model 1:35 - Sd.Kfz.182 King Tiger (Porsche Turret)
Sold Out
Meng Model 1:35 - Sd.Kfz.182 King Tiger (Porsche Turret) - Plastic model kit #TS-037
The Panzerkampfwagen Tiger Ausf. B or the Tiger II 'King Tiger' was a WWII German heavy tank. The tank entered production late in the war although its development started as early as 1937-1939 with design contracts given to Henschel and Porsche. The prototypes built by these companies differed in a number of features including the hull design, the transmission and suspension.
The Porsche designs had a rear-mounted turret and a mid-mounted engine. The suspension on this version was the same as on the Elefant and components of this suspension were later used on a few Jagdtiger tank destroyers. Overall Porsche's design was seen as less conventional and more difficult to produce, and Henschel won the contract.
Production versions of the Tiger II used two different turrets. The initial turret is often called the "Porsche" turret due to the misconception that it was the turret used on the Porsche prototype, as opposed to the more common "production" or "Henschel" turret. In fact both prototypes used the initial Krupp design.
The early turret (the so called "Porsche" turret) had steeply sloped sides, a rounded front and a curved bulge on the left side which proved to be difficult to manufacture. Fifty early Tiger II's used this turret mounted to the Henschel's hull until it was simplified to have less steeply sloped sides and a thicker flat face.
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. D
£45.00 GBP
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. D - Plastic model kit #TS-038
The Sd.Kfz.171 Panzerkampfwagen V Panther was a German medium tank of the Second World War in service from 1943 until 1945. The tank served alongside the Panzer IV and the Tiger I on the Eastern and Western Fronts in Europe. The Panther Ausf. D was produced from January 1943 until September 1943 with 842 vehicles of this variant built in total.
Kit details:
- External details of the Panther Ausf. D Medium tank are perfectly replicated
- Brand new Panther Ausf. D tracks are included; optional Panther Ausf. D turret detail parts are included
- Detail parts for the Panther Ausf. D's in different units are included
- The main gun travel lock can be built in open or closed position
- PE parts are provided for the commander's cupola
- PE parts are provided for side skirts
- Four typical paint schemes are provided
- Precision PE parts and metal cables are included
Meng Model 1:35 - Sd.Kfz.171 Panther Zimmerit Decals
Sold Out
Meng Model 1:35 - Sd.Kfz.171 Panther Zimmerit Decals
When Germany started the production of the Panther Ausf. A, Zimmerit was used to cover the metal armour of the vehicles to prevent magnetic anti-tank mines from sticking to it. Zimmerit was applied to Panther tanks in different patterns as there was no exact requirement on the appearance of this coating.
Meng has selected four most popular and hard to replicate Zimmerit patterns and created a series of easy to use water slide decals representing those patterns. Use one of them with the TS-035 Sd.Kfz.171 Panther Ausf. A (Late) kit to add more realism to your Panther model.
Available options:
SPS-050 Sd.Kfz.171 Panther Zimmerit Decal A (Type 1)
SPS-051 Sd.Kfz.171 Panther Zimmerit Decal B (Type 2)
SPS-052 Sd.Kfz.171 Panther Zimmerit Decal C (Type 3)
SPS-053 Sd.Kfz.171 Panther Zimmerit Decal D (Type 4)
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. A (Late)
£45.00 GBP
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. A (Late) - Plastic model kit #TS-035
The German medium tank Sd.Kfz. 171, originally designated the Panzerkampfwagen V Panther, was used from 1943 until the end of WWII on Eastern and Western Fronts in Europe. The Panther Ausf. A was produced from August 1943 until August 1944 with 2,200 vehicles built in total by MAN, Daimler-Benz, Demag and Henschel. This was the second version of the tank which weighed more than any other Panther - 48 tons.
This Sd.Kfz. 171 Panther Ausf. A Late kit was released by Meng with the help of The Tank Museum in Bovington, UK.
The assembled model dimensions:
- Length 251.8mm
- Width 98.6mm
- Height 85.27mm
Kit details:
- 1118 total parts
- Plastic parts in red and black colour
- Clear plastic parts
- Photo-etched parts
- Metal cables
- Markings for six options are provided
Meng has created a series of water slide Zimmerit decals for this kit, check them out here.
Meng Model 1:35 - Sd.Kfz.182 King Tiger Zimmerit Decal
Sold Out
Meng Model 1:35 - Sd.Kfz.182 King Tiger Zimmerit Decal - Plastic model kit #SPS-039
Zimmerit was used on WWII German AFVs since 1943 to cover the metal armour of the vehicle to prevent magnetic anti-tank mines from sticking to it. Zimmerit had the consistency of a thick paste or putty that after application was patterned and then hardened with a blow torch. This process usually happened at the factory and the patterns could vary depending on where the vehicle was produced. In the late 1944 Zimmerit was discontinued from application due to concerns that it could catch fire.
These water slide decals have a 3D printed texture to replicate Zimmerit applied to the early Kingtigers. This set is perfect for the Kingtiger Sd.Kfz.182 (Henschel Turret) kit from Meng.
Meng Model 1:35 - Sd.Kfz.182 King Tiger Interior (Henschel)
Sold Out
Meng Model 1:35 - Sd.Kfz.182 King Tiger Interior (Henschel turret) - Plastic model kit #SPS-037
The Tiger II, or Panzerkampfwagen Tiger Ausf. B, was a German heavy tank of the Second World War. It is also known under the informal name Königstiger, often translated as King Tiger by Allied soldiers.
Based on the Tiger I, the Tiger II combined the thick armour of its predecessor and the sloped armour of the Panther tank. The tank weighed almost seventy tonnes. It was protected by 100-180mm armour at the front, and was armed with the long barrelled Kampfwagenkanone 8.8cm 43 L/71 gun which proved to be efficient against all Allied tanks.
This kit contains parts for the interior of the Meng Model King Tiger Sd.Kfz.182.
Kit details:
- Chassis replicated in detail
- The driver’s and radioman’s seats presented
- Periscopes reproduced in clear parts
- Fuel tanks on both sides of the chassis
- Torsion bar parts for movable suspension included
- The Maybach HL230 engine, drive shaft and transmission, all perfectly replicated
- The Turret fitted with a KwK 43 L/71 gun
- Spare periscopes provided
- Storage box of the co-axial machine gun spare barrels included
- APC, HVAP and HEAT rounds included
- The commander's cupola finely replicated
Meng Model 1:35 - Merkava Mk.3D/BAZ Tactical Markings
Sold Out
Meng Model 1:35 - Merkava Mk.3D/BAZ Tactical Markings - Plastic model kit #SPS-003
The Mk.3D/BAZ is a variant of the Israeli Merkava 3D main battle tank enhanced with the BAZ system (BAZ shortened from Hebrew "Barak Zoher" meaning "Shining Lightning"). The BAZ system includes a number of upgrades mainly concerning protection of the vehicle from enemy fire and nuclear, biological and chemical weapons.
This decal sheet includes various IDF tactical markings suitable for the Israeli Merkava Mk.3D/BAZ main battle tank. Two painting schemes are provided, however the modeller can choose other alternatives in order to build a unique tank. The kit adds realism and details to a Merkava Mk.3D/BAZ model.
Meng Model 1:35 - Merkava Mk.3D Late LIC
£58.00 GBP
Meng Model 1:35 - Merkava Mk.3D Late LIC - Plastic model kit #TS-025
The Merkava is the main battle tank of the Israeli Defense Forces. It has four main variants - the Mark I, Mark II, Mark III and Mark IV. The Merkava Mark III was issued in 1989 and remained in production until 2003. In 2016 the Merkava III was considered the most numerous tank in service with the IDF. Unlike its predecessor, the Mk.II, the Mark III had a larger 1,200 hp diesel engine and was armed with the more advanced IMI 120 mm gun.
The Merkava Mk.3D LIC is one of the Mark III versions. It was modified to operate in low intensity conflicts (LIC) in urban areas. For that purpose it was fitted with more advanced armour (including underside armour against anti-tank mines and IEDs), front and rear towing horns on the chassis and additional protection of the optical equipment and lights. The Merkava Mk.3D saw action in various modern conflicts including the Lebanon War in 2006 and the Gaza War in 2009. It was also widely deployed in numerous security operations along the Israeli border.
Additional:
- Movable crew hatches
- Road wheels with rubber tyres included
- All-steel road wheels included
- Periscopes and lights
- Precise photo-etched parts
- Two painting style options
Length - 260mm
Width - 111mm
Meng Model 1:35 - Soviet T-10M Heavy Tank
£58.00 GBP
Meng Model 1:35 - Soviet T-10M Heavy Tank - Plastic model kit #TS-018
With the start of the Cold War in the late 1940's the Soviets made a decision to bring into development the IS series of heavy tanks (IS - "Iosif Stalin", Russian for "Joseph Stalin"). Based on the IS-3 model, the first prototypes were designated IS-8 and IS-9. In 1952 the new vehicle was put into production under the name IS-10, however with the beginning of the de-Stalinization period following Stalin's death in 1953 it was renamed the T-10.
The T-10 adopted many features of the earlier IS models, e.g. it was armed with an enhanced 122 mm gun M1931/37 from the IS-2 and IS-3 tanks. The main improvements of the T-10 consisted of a larger turret mount, a better diesel engine, thicker armour and a hull extended to fit an engine cooling system. Also, the T-10 had seven pairs of road wheels unlike the IS-3 which had only six. In general, the T-10 showed similar performance as the IS-3, however it had more room for ammunition. In combat T-10 tanks were mainly used as a support to infantry troops and during breakthrough operations.
The T-10M was an upgraded version of the T-10 which entered production in 1957 at both the Chelyabinsk Tractor Plant and the Kirov Plant. The major difference concerned the armament of the tank: the new M-62-TS gun was longer than the previous M1931/37 and featured a unique multi-slotted muzzle brake (a device that reduces recoil of the gun) as well as a fume extractor (a device on the gun barrel that prevents toxic gases from getting inside the vehicle's fighting compartment).
The development of more powerful engines, better suspension systems and light composite armour made it possible to increase tank firepower, armour protection and mobility. These developments allowed for replacing heavy tanks with lighter medium tanks. The T-10 was phased out in the 1960's and, along with the rest of the Soviet heavy tanks, replaced with the T-64, T-72, T-80 and other medium tanks.
Kit details:
- Clear lights, periscopes and optical equipment included- Movable torsion bar suspension
- Cement-free workable tracks
- Movable crew hatches
- Main gun barrel can be elevated
- Precise photo-etch parts
- Four paint schemes included
Dimensions:
Length: 305mm
Width: 97mm
Meng Model 1:35 M1A1 Abrams TUSK Main Battle Tank
£58.00 GBP
Meng Model 1:35 - M1A1 Abrams TUSK Main Battle Tank - Plastic model kit #TS-032
The M1 Abrams is a modern U.S. third-generation main battle tank. It entered service in 1980 to replace the M60. The M1 is the principal main battle tank of the U.S. Army and the Marine Corps. It is also widely used by the armies of Egypt, Kuwait, Saudi Arabia, Australia and Iraq.
A modification of the first Abrams model, the M1A1 was introduced in 1986. It was equipped with a M256 120 mm smoothbore gun and a CBRN protection system. The tank first saw combat in 1991 during the Persian Gulf War. About 2,000 units took part in the liberation of Kuwait and only 23 of them were totally destroyed. The M1A1 fire could reach the enemy's positions at the range of 2,500 metres. That range was deadly to Iraq's Soviet-era tanks, inferior to the M1A1. In fact, the Abrams tanks could damage Iraqi tanks before they approached close enough to open fire. In 1992 the M1A1 was upgraded to the M1A2 version.
Meng Model 1:35 - Russian Main Battle Tank T-72B3
Sold Out
Meng Model 1:35 - Russian Main Battle Tank T-72B3 - Plastic model kit #TS-028
The T-72B3 is an enhanced Russian version of the Soviet second-generation T-72B tank and a cheaper alternative to the earlier T-72B2 "Rogatka" tank. Compared to the earlier vehicles of the series, the T-72B3 features a more powerful engine, an advanced fire control system and Kontakt-5 explosive reactive armour.
The T-72B3 entered service with the Russian Army in 2013. By 2016 at least 600 earlier models were modified to the new version. In 2014 T-72B3 tanks were used in combat during the armed conflict in Donbass, Ukraine. In 2017 the vehicles saw action in Syria.
Meng Model 1:35 - German MBT Leopard 2A7
£58.00 GBP
Meng Model 1:35 - German MBT Leopard 2A7 - Plastic model kit #TS-027
The Leopard 2 was developed in the 1970's for the West German Army and entered service in 1979 replacing the Leopard 1 as the main battle tank of the German Army.
The Leopard 2A7 is one of the latest versions of the series issued in 2014. A total of 14 vehicles were produced for Tank Battalion 203 and a few more were sent to military training centres and schools.
Based on its predecessor, the 2A6M, the 2A7 retains the armament of the earlier models - a 120mm smooth bore gun. The tank was upgraded with a new air conditioning system, power system and tactical systems (including the Saab Barracuda Mobile Camouflage System (MCS) and a SOTAS digital intercom system). Also, the vehicle was improved with additional armour which protects it against chemical anti-tank weapons and improvised explosive devices. Due to all the enhancements, the Leopard 2A7 is considered the most advanced German main battle tank suitable for low-intensity conflicts.
Additional detail on the kit:
- Movable torsion bar suspension
- Cement-free workable tracks
- Adhesive mirror foil
- Clear lights and optical equipment
- Precise Photo Etched parts
- Paint scheme of Tank Battalion 203
Dimensions:
- Length 315mm
- Width 110mm
- Height 87mm
Meng Model 1:35 - Merkava Mk.3D Early
£53.00 GBP
Meng Model 1:35 - Merkava Mk.3D Early - Plastic model kit #TS-001
The Merkava is the main battle tank of the Israeli Defense Forces. It has four main variants - the Mark I, Mark II, Mark III and Mark IV. The Merkava Mark III was issued in 1989 and remained in production until 2003. In 2016 the Merkava III was considered the most numerous tank in service with the IDF. Unlike its predecessor, the Mk.II, the Mark III had a larger 1,200 hp diesel engine and was armed with the more advanced IMI 120 mm gun.
The Merkava Mk.3D was the further modification of the Mark III. The new version had a better armour and was improved with a panoramic commander’s sight. The Merkava Mk.3D saw action in various modern conflicts including the Lebanon War in 2006 and the Gaza War in 2009. It was also widely deployed in numerous security operations along the Israeli border.
Check out a building guidance video for this kit here
Additional:
- Precise reproduction of the turret
- Two options for road wheels and the driver’s hatch
- The headlights and periscopes can be opened and closed
- The tie-downs at the rear of the turret easy to assemble
- Two painting style options
Dimensions:
Length - 258mm
Width - 111mm
Meng Model 1:35 - Sd.Kfz.182 King Tiger Workable Tracks
Sold Out
Meng Model 1:35 - Sd.Kfz.182 King Tiger Workable Tracks - Plastic model kit #SPS-038
These workable tracks are designed for the Meng Model King Tiger Sd.Kfz.182 as an alternative to the tracks included in the box. After assembly all track links remain movable, which helps create a realistic representation of the tank. The kit also includes torsion bars and connecting pins made of metal.
Meng Model 1:35 - British Heavy Assault Tank A39 Tortoise
Sold Out
In the beginning of 1943, Allied forces were preparing for severe resistance in the planned re-taking of Europe, with the Germans defending from strong fortified positions. As a result, a new class of vehicle was required and entered into development and production, they were called assault tanks. The concept prioritised maximum armour protection over mobility. 25 were ordered for production without prototypes being required but finally the order was reduced to 6 after the war had ended. This design was commissioned in 1943 and 18 variants were prepared by Nuffield Mechanisations and Aero Limited, progressively larger and heavier in concept they were aiming to be ready for the battlefield in September 1945.
Given the structure of the Tortoise it is technically a Self-propelled gun not a tank and had a crew of 7 - a commander, driver, and gunner, with two loaders for the 32-pounder gun and two machine gunners.
The Meng Model British A39 Tortoise Heavy Assault Tank is 293mm long and 111mm wide. The fixed casemate superstructure and weld seams of the fighting compartment make the kit nicely realistic. The 94mm long barrel gun can freely turn and the mantlet is accurate. The travel lock can lock the gun and the machine gun in the front ball mount can freely rotate. Hatches can be open or closed. The four bogies on either side each with two wheels and transverse torsion bar suspension system are faithfully reproduced.
If you are looking for an excellent guide to building and painting this kit please click here.
Dimensions:
Length: 293mm
Width: 111mm
Meng Model 1:35 - Russian Main Battle Tank T-90 with TBS-86 Tank Dozer
Sold Out
Meng Model 1:35 - Russian Main Battle Tank T-90 with TBS-86 Tank Dozer - Plastic model kit #TS-014
The T-90 is a modern Russian battle tank first produced in 1993. Similarly to its predecessors, the T-72B and the T-80U, the T-90 was designed with a cast turret. It is equipped with an improved Irtysh fire control system and a more powerful V-84MS multi-fuel engine. The T-90 armament includes a 125 mm 2A46 smoothbore main gun with 43 rounds. The tank also features the "Shtora" (Russian: Штора, "curtain") electro-optical active protection system aimed to disrupt guided missiles. Additional protection is ensured by smoke grenade dischargers, the Kontakt-5 ERA and composite armour. After a number of upgrades the T-90 tank and its modifications are still in use in Russia, Syria, India, Armenia and some other countries.
Kit details:
- Length: 289mm, Width: 109mm
- Separate anti-radiation applique parts, periscopes and optical equipment included
- Light-emitting electronic components for replicating infrared dazzlers
- Cement-free workable single pin track links easy to assemble
- Tank dozer precisely detailed
- Photo Etched parts and three paint schemes provided
Meng Model 1:35 - German Main Battle Tank Leopard 1 A3/A4
£50.00 GBP
Meng Model 1:35 - German Main Battle Tank Leopard 1 A3/A4 - Plastic model kit #TS-007
The Leopard 1 is a main battle tank which was developed in West Germany and entered production in 1965. The project was commissioned by the Bundeswehr in order to replace the M47 and M48 Patton tanks, already outdated by that time. The project had started as a collaborative program between West Germany, France and Italy, however the partnership ended when the first prototypes were built - Italy and France decided to focus on their own technologies. The German model was designed by Porsche. In total, over 4,000 Leopard battle tanks have been produced, excluding prototypes and anti-aircraft vehicles.
By 1980, several modifications of the Leopard 1 had been issued including the Leopard 1A3 and the Leopard 1A4. The 1A3 version featured a welded turret which was much heavier than the turrets of its predecessors and also had better armour with a wedge-type gun mantlet. The commander's compartment was equipped with an improved TRP 2A independent sight. The 1A4 model was upgraded with a new computerised fire control system and a new sighting system, but in general it was quite similar to the Leopard 1A3.
Exported worldwide, the Leopard series saw action during the Bosnian War, the Kurdish–Turkish conflict and the War in Afghanistan. It still remains in use in a number of countries such as Brazil, Chile, Greece and Turkey.
Kit details:
- Periscopes and lights with clear parts
- All hatches modelled open or closed
- Armour protection and grilles for engine compartment can be presented with PE parts
- Track links and one-piece TPE tracks included
- Decals for three options: German Leopard 1 A3/A4 or Greek Leopard 1 A3
Meng Model 1:35 - French FT-17 Light Tank (Cast Turret)
£50.00 GBP
Meng Model 1:35 - French FT-17 Light Tank (Cast Turret) - Plastic model kit #TS-008
The Renault FT, also known as the FT-17, was a French light tank of the late WWI period. Remarkable for its revolutionary design, the FT-17 played an invaluable role in the history of tank development. It was the first tank that featured a revolving turret. The FT-17 had a crew compartment at the front, an engine compartment in the rear, and main armament placed inside of the turret. This configuration became and remains the standard tank design making the FT-17 the first modern tank in the world.
The first FT-17 turrets were made of cast steel and fitted with Hotchkiss 8mm machine guns. However, later the turrets were also adapted to carry 37mm Puteaux small canons.
The FT-17 was mainly deployed by French troops at the late stages of WWI. After the end of the war the tank was exported to many countries including Belgium, Brazil, Finland, Iran and others.
Meng Model 1:35 German A7V Tank (Krupp)
Sold Out
Meng Model 1:35 - German A7V Tank (Krupp) - Plastic model kit #TS-017
The A7V was a German tank designed in 1916 in response to the first British tanks appearing during WWI on the Western Front. By 1918 twenty armoured vehicles were ready for use on the battlefield. Those were the only German tanks deployed in WWI. In contrast, France produced over 3,600 tanks and the British had over 2,500 units in service.
The dimensions of the A7V were 7.34m x 3m x 3.3m (L x W x H). The tank had steel plate armour, but as the steel was not hardened it could only protect against machine gun or rifle fire and was of little use against larger calibre ammunition. The armament included six MG 08 machine guns and a 5.7 cm Maxim-Nordenfelt cannon. Some of the cannons were trophies taken from British and Russian troops at the early stage of the war.
The A7V had little success in combat so the German General War Department intended to introduce new designs. However, the defeat of Germany and the Versailles Treaty disrupted those plans.
Kit details:
- Accurately represented exterior
- Realistic interior of the fighting compartment and the driver’s compartment
- Workable track links
- All hatches and viewing ports can be built open or closed
- Precision photo-etched parts included
- Length 229mm, Width 100mm
Meng Model 1:35 - King Tiger Sd.Kfz.182 (Henschel Turret)
Sold Out
Meng Model 1:35 - King Tiger Sd.Kfz.182 (Henschel Turret) - Plastic model kit #TS-031
The Tiger II was a German heavy tank of WW2. Its official German designation was Panzerkampfwagen Tiger Ausf. B, often shortened to Tiger B. It is also known under the informal name Königstiger ("Bengal Tiger"), often translated as King Tiger or Royal Tiger by Allied troops. The initial design of the Tiger II was developed in 1937 by the Henschel company. Another design was developed by Porsche in 1939, but it was declined due to higher production costs.
Based on the Tiger I, the Tiger II combined the thick armour of its predecessor and the sloped armour of the Panther medium tank. The tank weighed almost seventy tonnes, it was protected by 100 - 180mm of armour at the front, and was armed with the long barrelled Kampfwagenkanone 8.8cm 43 L/71 gun which proved to be efficient against all Allied tanks.
The Tiger II first saw combat during the Battle of Normandy in 1944. Fortunately for the Allies, German plants were severely disrupted by Allied bombing, so a relatively small number of Tiger II's were built. Mass production ran from 1944 to the end of the war and only 492 units were produced during that period.
The kit includes parts for the King Tiger Sd.Kfz.182 heavy tank with two different gun mantlets.
Meng Model 1:35 - German Main Battle Tank Leopard 1A5
Sold Out
Meng Model 1:35 - German Main Battle Tank Leopard 1A5 - Plastic model kit #TS-015
The Leopard 1 is a main battle tank which was developed in West Germany and entered production in 1965. The project was commissioned by the Bundeswehr in order to replace the M47 and M48 Patton tanks, already outdated by that time. The project had started as a collaborative program between West Germany, France and Italy, however the partnership ended when the first prototypes were built - Italy and France decided to focus on their own technologies. The German model was designed by Porsche. In total, over 4,000 Leopard battle tanks have been produced, excluding prototypes and anti-aircraft vehicles.
By 1980, several modifications of the Leopard 1 had been issued, however the series required further upgrade. The next version was the Leopard 1A5 equipped with the EMES 18 fire control system and highly effective night/bad-weather vision system. The turret was reconstructed in order to store equipment and ammunition into its rear. The tank was armed with new APFSDS (armour-piercing fin-stabilized discarding-sabot) rounds.
The Leopard 1A5 entered service in 1987. Similar upgrades were implemented on almost all Leopard units that were in use at that time, and today the Leopard 1A5 is considered the "standard" version of the series.
Meng Model 1:35 - German Panzerhaubitze 2000 Self-Propelled Howitzer
Sold Out
Meng Model 1:35 - German Panzerhaubitze 2000 Self-Propelled Howitzer with add-on armour - Plastic model kit #TS-019
The Panzerhaubitze 2000, shortened to PzH 2000, is a German 155 mm self-propelled howitzer. It was developed by the KraussMaffei Technologies GmbH together with the Rheinmetall AG for the needs of the German military. The production was launched in 1998 and continues to the present.
The PzH 2000 is considered one of the most powerful artillery pieces used in the 21st century. It is known for its remarkably high fire range - the howitzer can unload 3 shells in 9 seconds and 10 shells in 56 seconds. The PzH 2000 is also equipped with the MRSI system (Multiple Rounds Simultaneous Impact) which allows it to hit the target with several shells at a time. The 155 mm L52 artillery gun is complemented by a MG3 7.62 mm machine gun. The top speed is 67 km/h.
The Panzerhaubitze 2000 was widely used by the Dutch and German troops during the War in Afghanistan. Today it is in service with the armies of Italy, the Netherlands, Greece and other countries-members of NATO.
Kit details:
- Length 339mm, Width 102mm
- Precisely reproduced needle-shaped armour
- Movable torsion bar suspension
- Cement-free workable tracks
- Clear lights and periscopes
- Precise photo-etched parts
- Four paint schemes
Meng Model 1:35 British Heavy Tank Mk.V Female
Sold Out
Meng Model 1:35 - British Heavy Tank Mk.V Female - Plastic model kit #TS-029
The British heavy tank Mk.V Female, also known as the Mark V, was put into service in 1918, at the end of WWI. Based on the Mark IV, the Mk.V differed greatly from its predecessor: due to Wilson's gearbox the tank required only one man to set it in motion. The main distinctive feature of the exterior was the cooling air system installed on each side of the tank. Besides, the design was improved by a Ricardo engine and an extra machine-gun mount.
The Mark V first saw action during the Australian offensive against the German units in Northern France, called the Battle of Hamel. The tank was also used by both the White Armed Forces in the Russian Civil War and the Red Army afterwards.
Until the end of WWI a total of 400 Mk.V tanks were built, both Males and Females. The Males carried two 57 mm guns and four machine guns, while lighter and smaller Females were armed with six machine guns only.
Meng Model 1:35 US Main Battle Tank M1A2 SEP Abrams TUSK I/TUSK II
£58.00 GBP
Meng Model 1:35 - US Main Battle Tank M1A2 SEP Abrams TUSK I/TUSK II - Plastic model kit #TS-026
The M1A2 battle tank belongs to the M1 Abrams series named after Creighton Abrams, commander of the US Army in the Vietnam War from 1968 to 1972. A modified version of the M1A1, the M1A2 features a commander's independent thermal sight, fire control console, and modern navigational devices. The SEP stands for the System Enhancement Package that allowed upgrades for the tank with digital mapping, the FBCB2 platform and a better cooling system. Later the M1A2 was equipped with the Tank Urban Survival Kit (TUSK) aimed to improve combat capabilities in urban areas and provide protection against rocket-propelled grenades. Despite the recent appearance of more advanced M1 Abrams versions, the M1A2 is planned to be used by the US Army until at least 2050.
Dimensions: Length 380.2mm, Width 240.6mm
Additional:
- Movable hatches, track links and suspension
- Two types of commander's cupolas
- Rotatable commander's machine gun
- Lights and periscopes are included
Meng Model 1:35 British Heavy Tank Mk.V Male
Sold Out
Meng Model 1:35 - British Heavy Tank Mk.V Male - Plastic model kit #TS-020
The British heavy tank Mk.V Male, also known as the Mark V, was put into service in 1918, near the end of WWI. Based on the Mark IV, the Mk.V differed greatly from its predecessor, thanks to its Wilson gearbox the tank required only one man to set it in motion. The main distinctive feature of the exterior was the air cooling system installed on each side of the tank. In addition, the design was improved by a Ricardo engine and an extra mounted machine-gun.
The Mark V first saw action during the Australian offensive against the German units in Northern France, called the Battle of Hamel. The tank was also used by both the White Armed Forces in the Russian Civil War and the Red Army afterwards.
Until the end of WWI a total of 400 Mk.V tanks were built, both Males and Females. The Males carried two 57 mm guns and four machine guns, while lighter and smaller Females were armed with six machine guns only.
Dimensions: Length 243mm, Width 112mm
Additional:
- The kit includes a riveted rhomboid hull
- All hatches can be built in either open or closed position
- Sponsons and cement-free tracks
- Engine and interior reproduced in detail
Meng Model 1:35 Russian T-90A Main Battle Tank
£58.00 GBP
Meng Model 1:35 - Russian T-90A Main Battle Tank - Plastic model kit #TS-006
The T-90 is a modern Russian battle tank first produced in 1993. Similarly to its predecessors, the T-72B and the T-80U, the T-90 was designed with a cast turret. It was equipped with an improved Irtysh fire control system and a more powerful V-84MS multi-fuel engine. In 2005 the tank was replaced by a T-90A model featuring a welded turret. Less than 200 T-90 vehicles were delivered to the Army from 1993 till 2005.
The T-90A is driven by the V-92S2 diesel engine, fitted with an ESSA thermal sight and protected by the latest Kontakt-5 explosive reactive armour. The tank saw combat in Syria during the Russian participation in the Syrian conflict.
Dimensions: Length 291mm, Width 109mm
Kit details:
- Includes a rotatable commander’s cupola, movable torsion bar suspension and V-92S2 engine
- All hatches can be built in open or closed position
- Cement-free double-pin tracks
- Three paint schemes
© 2024 Panzer Models. Prepared by Article.
