All
Trumpeter 1:35 20mm Flakvierling 38 auf Selbstfahrlafette
Sold Out
Trumpeter 1:35 - German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version) - Plastic model kit #01524
The Flak 38 was a German 20mm anti-aircraft gun used throughout WWII which became the most numerously produced German artillery piece of the period. The 20mm Flakvierling 38 auf Selbstfahrlafette (Sd. Kfz. 7/1) was the result of combining the 20mm Flakvierling 38 with four Flak 38 guns and the Sd. Kfz. 7 half-track, to provide greater mobility and firepower. The Sd. Kfz. 7/1 carried 600 2cm rounds on board and 1800 rounds in the towed Sd. Ah. 56 trailer. The guns had the 360 degrees traverse by hand and could be elevated from -10 to +100 degrees. The later versions also included an armoured cab for better protection of the crews. A crew of 10 included a gun commander, eight gunners and a driver.
The first 100 vehicles were produced in 1940-1941 and production continued at a rate of 10 vehicles per month until August 1942, when the monthly rate was significantly increased. Around 800 vehicles were produced by December 1944. From 1942, most vehicles were fitted with lightly armoured driver cabs and a plate to protect the engine compartment. The armour was 8mm thick. These vehicles were issued to Flak units of the Luftwaffe and Panzer units of the German Army. Sd. Kfz. 7/1 units were used to protect armoured units against low flying aircraft but were also successfully used against ground targets.
The kit represents a late version of the Sd.Kfz.7/1 with a 20mm Flakvierling 38. Early versions featured the central circular pivot mounting for the 20mm Flakvierling 38. Later versions had a normal ground mounting fitted to the rear bed which allowed the gun to be easily removed and mounted on the standard Flakvierling Sd. Ah. 52 trailer if necessary.
Item No: 01524
Item Name: German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version)
Scale: 1:35
Item Type: Static Armour
Model Dimensions: Length 312.5mm, Width 69mm, Height 107mm
Total Parts: 859 pcs
Metal Parts: Brass wire
Photo Etched parts: 5 frets
Total Sprues: 20 pcs sprues, 3 rubber tyres and an armoured cab
Paint Schemes: Markings are provided for vehicles in dark yellow with red brown and green camouflage scheme
Release date: 2009-07
Additional:
- New tooled slide-moulded one-piece late type KM m11 mudguard
- Side panels and the top panel of the engine hood can be opened
Trumpeter 1:35 Soviet Limber 52-R-353M Mod 1942
£10.00 GBP
Trumpeter 1:35 - Soviet Limber 52-R-353M Mod 1942 - Plastic model kit #02345
This kit includes parts for the 52-R-353M limber used by the Red Army for 76.2 mm regiment and division artillery. Usually pulled by four horses, the limber also served as an ammunition truck.
Item No: 02345
Item Name: Soviet Limber 52-R-353M Mod 1942
Scale: 1:35
Item Type: Static Kit
Model Dimensions: Length 135.6mm, Width 45.6mm
Total Parts: 80+
Photo Etched Parts: 1 piece
Total Sprues: 2 sprues and tires
Release Date: 2015-09
Additional:
- The kit consists of over 80 parts
- Refined detail
- Photo Etched parts included
- Rubber tires
Trumpeter 1:35 Russian 9P113 TEL with 9M21 Rocket of 9K52 Luna-M Short-range artillery
£100.00 GBP
Trumpeter 1:35 - Trumpeter 1:35 Russian 9P113 TEL with 9M21 Rocket of 9K52 Luna-M Short-range artillery - Plastic model kit #01025
The 9K52 Luna-M ("Luna" - Russian: Луна, English: moon) is a Russian short-range artillery rocket system designed to deliver 9M21 uncontrolled missiles. The system is also known under the NATO name "FROG-7" (Free Rocket Over Ground).
The rockets are carried by the 9P113 transport erector launcher (TEL). Derived from the ZIL-135 8x8 army truck, the 9P113 has a hydraulic crane used for reloading rockets from other transporters. The range of the rocket is up to 70 km and a CEP (circle of equal probability) is between 500 m and 700 m. The 9M21 can deliver nuclear or chemical warheads weighting 550 kg.
According to some experts, the 9M21 rockets loaded with nuclear warheads were transported to Cuba during the Cuban Missile Crisis in 1962. Also the 9K52 Luna-M system was extensively used in a number of Warsaw Pact states and in the Middle East. Currently it serves with the armies of Russia, Ukraine, Syria, Afghanistan, Egypt and several other countries.
Item No: 01025
Item Name: Russian 9P113 Luna-M Rocket System
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 295mm, Width 85mm
Total Parts: 900+
Photo Etched Parts: 3 pcs
Total Sprues: 16 sprues, cab and tires
Release Date: 2016-09
Additional:
- The kit consists of over 900 parts and 3 pieces of Photo Etched parts
- Detailed cab
- Full drive train assembly complete with engine transmission, differential housing and suspension units
- The main tires made of hollow rubber
- The windshield and side windows are made of clear parts
Trumpeter 1:35 Soviet AT-P Artillery Tractor
£45.00 GBP
Trumpeter 1:35 - Soviet AT-P Artillery Tractor - Plastic model kit #09509
The AT-P was a Soviet artillery tractor that entered production in the early 1950's. It carried the 85 mm D-48 and 100 mm T-12 field guns and was powered by a 110 hp gasoline engine installed in the rear. A gunner's seat was placed in the front of the vehicle, to the right side of the driver's seat. The AT-P was mainly used to tow artillery pieces, however in some countries it has also served as an APC.
Item No: 09509
Item Name: Soviet AT-P Artillery Tractor
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 128.4mm, Width 73.6mm
Total Parts: 280+
Metal Parts: copper cable
Photo Etched Parts: 1 piece
Total Sprues: 7 sprues, lower hull and upper hull
Release Date: 2016-09
Additional:
- The kit consists of over 280 parts and 1 piece of Photo Etched parts
- Plastic tracks with fine details
- Multi-slide moulded lower hull
Trumpeter 1:35 Soviet D-74 122mm Field Gun
£35.00 GBP
Trumpeter 1:35 - Soviet D-74 122mm Field Gun - Plastic model kit #02334
The Soviet 122mm D-74 towed gun was designed in the 1950s at Artillery Plant No. 9 in Sverdlovsk. The gun had a 52 calibre barrel and weighed 5,600 kg. In Soviet service the D-74 was usually towed by a URAL-375 6×6 truck. Today the 122mm D-74 is in reserve units with the Russian Army. It is in service in 9 countries, and is actively used by the Sri Lankan, the Egyptian and the Pakistani armies.
Item No: 02334
Item Name: Soviet D-74 122mm Field Gun
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 303mm, Width 78mm
Total Parts: 240+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 9 sprues, frame and tires
Release Date: 2014-11
Additional:
- The kit consists of over 240 parts, 1 piece of Photo Etched parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 152mm Soviet Howitzer D-20
£40.00 GBP
Trumpeter 1:35 - 152mm Soviet Howitzer D-20 - Plastic model kit #02333
The 152mm Soviet Howitzer, or D-20, entered production in the 1950s as a replacement of the ML-20 gun-howitzer as well as various 152mm howitzers of WWII era. The gun had a 34 calibre (5.195m) barrel and incorporated a semi-automatic vertical sliding block breech. The D-20 was used in Vietnam War, Six-Day War, Yom Kippur War, Soviet war in Afghanistan, Syrian civil war and a number of other conflicts. The D-20 was manufactured in the People's Republic of China as the Type 66. Today the howitzer is in operation in over 20 countries.
Item No: 02333
Item Name: Soviet D-20 152mm towed Gun-Howitzer
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 260mm, Width 78mm
Total Parts: 240+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 9 sprues, frame and tires
Release Date: 2013-05
Additional:
- The kit consists of over 240 parts, 1 piece of Photo Etched parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 Soviet 122mm Howitzer D-30 (Late version)
£25.00 GBP
Trumpeter 1:35 - Soviet 122mm Howitzer D-30 (Late version) - Plastic model kit #02329
The Soviet 122mm Howitzer D-30 entered service in the 1960s. It was a relatively light and handy weapon, but heavy enough for sustained long range fire in the field. The D-30 had a maximum range of 15.4 kilometers, or over 21 km using RAP ammunition. With its striking three-leg stabilising system the D-30 could be rapidly traversed through 360 degrees.
The D-30 howitzer is no longer manufactured in the former Soviet Union nations, but is still produced internationally and is in service in more than 60 countries' armed forces.
The 2A18 gun is the primary weapon of the 2S1 self-propelled howitzer. There are also Egyptian, Chinese, and Syrian self-propelled variants and conversions. The Syrian conversion uses the hull of a T-34 tank.
Item No: 02329
Item Name: Soviet D-30 122mm Howitzer - Late Version
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 162mm, Width 63mm
Total Parts: 150+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 5 sprues, frame and tires
Release Date: 2012-12
Additional:
- The kit consists of over 150 parts, 1 piece of Photo Etched parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 Soviet 122mm Howitzer D-30 (Early version)
£21.00 GBP
Trumpeter 1:35 - Soviet 122mm Howitzer D-30 (Early version) - Plastic model kit #02328
The Soviet 122mm Howitzer D-30 entered service in the 1960s. It was a relatively light and handy weapon, but heavy enough for sustained long range fire in the field. The D-30 had a maximum range of 15.4 kilometers, or over 21 km using RAP ammunition. With its striking three-leg stabilising system the D-30 could be rapidly traversed through 360 degrees.
The D-30 howitzer is no longer manufactured in the former Soviet Union nations, but is still produced internationally and is in service in more than 60 countries' armed forces.
The 2A18 gun is the primary weapon of the 2S1 self-propelled howitzer. There are also Egyptian, Chinese, and Syrian self-propelled variants and conversions. The Syrian conversion uses the hull of a T-34 tank.
Item No: 02328
Item Name: Soviet D-30 122mm Howitzer - Early Version
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 155mm, Width 63mm
Total Parts: 150+
Photo Etched Parts: 1 piece
Release Date: 2012-07
Additional:
- The kit consists of 150+ parts, 1 piece of Photo Etched parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 Soviet ML-20 152mm Howitzer Mod 1937
£36.00 GBP
Trumpeter 1:35 - Soviet ML-20 152mm Howitzer Mod 1937 - Plastic model kit #02323
The Soviet 152mm howitzer-gun ML-20 (Model 1937) was an upgrade of the 152mm gun M1910/34. This gun was produced from 1937 to 1946. As a howitzer-gun, the ML-20 could be used both as a howitzer and as a gun. To achieve this, the model had a wide range of elevation angles and used separate loading with 13 different propellant loads. The ML-20 had both telescopic and panoramic sights. The ML-20 first saw combat in the Battle of Khalkhin Gol. It also participated in the Winter War and proceeded to be used throughout the Second World War. The ML-20 was used during WWII by the Soviet Army, and some of the guns were captured by the Germans and the Finnish Army. The ML-20 was also used after the end of World War II in a number of conflicts due to its excellent characteristics.
Item No: 02323
Item Name: Soviet ML-20 152mm Howitzer Mod1937 (Standard)
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 251.8mm, Width 75.4mm
Total Parts: 280+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Total Sprues: 8 sprues, bracket and tire
Release Date: 2012-09
Additional:
- The kit consists of 280+ parts, 2 pieces of Photo Etched parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
Trumpeter 1:35 PLZ-83A SPH
£29.00 GBP
Trumpeter 1:35 - PLZ-83A SPH - Plastic model kit #05536
The Type 83 SPH is a Chinese 152 mm self-propelled standard heavy howitzer. The gun entered service in the early 1980s and was used in Korea and against the Russians. The Type 83, armed with a modified version of the Type 66 gun, was the first modern self-propelled gun in service with the People's Liberation Army of China. Overall 78 guns were built until the end of production in 1990.
The Type 83 SPH was made from steel. It was also armed with a 12.7mm machine gun and a hand-held Rocket-propelled grenade launcher. The vehicle had a maximum speed of 55 km/h.
Soon after entering service, the Type 83 SPH was determined to be obsolescent and China started to develop new systems.
Item No: 05536
Item Name: PLZ-83A SPH
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 193.6mm, Width 95.6mm
Total Parts: 300+
Metal Parts: copper cable
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 8 sprues, lower hull, upper hull, turret and rubber tracks
Release Date: 2015-05
Additional:
- The kit consists of over 300 parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Photo Etched parts included
Trumpeter 1:35 PLA Type 59 130mm Towed Field Gun
£36.00 GBP
Trumpeter 1:35 - PLA Type 59 103mm Towed Field Gun - Plastic model kit #02335
The 130mm towed field gun (M-46) was manufactured in the Soviet Union in the 1950s. Its Chinese variant is called the Type 59. This manually loaded artillery piece had a range of more than 27km which made it one of the longest range artillery systems of its time.
China produced three versions of the M-46: the Type 59, the Type 59-1 and the Type GM-45. The Type 59 is a licensed version of the Soviet M-46. The Type 59-1 combines the 130mm ordnance of the Type 59 with the Type 60 carriage and has a gun of much lower weight - 6.3 t. The Type GM-45 was designed for the export market and has a maximum range of 39 km.
Item No: 02335
Item Name: PLA Type 59 130mm towed Field Gun
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 336mm, Width 78mm
Total Parts: 220+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 8 sprues, frame and tires
Release Date: 2015-04
Additional:
- The kit consists of over 220 parts, 1 piece of Photo Etched parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 Soviet Project / Object 704 SPH Howitzer
£64.00 GBP
Trumpeter 1:35 Soviet Project / Object 704 SPH Howitzer - Plastic model kit #TRU05575
As Soviet forces started to push German troops out of Russia, the armament factories were busy developing new military technology to counter the Panther and Tiger tanks and their various tank destroyer units. The ISU-152 series entered production in 1943 based on the KV-1 heavy tank chassis, armed with the ML-20 152.4mm gun howitzer. Despite these new variants being sent into combat, Soviet designers were immediately looking at new developments.
One of these experiments was the Object 704 which adopted the chassis features of the IS-2 and IS-3 tanks and was distinctive with its sloping armour and lower profile. Armed with the ML-20SM model 1944 gun-howitzer, with a barrel length of over 4.5 metres (29.6 calibers) and no muzzle brake, which further increased the firepower of the gun, the vehicle provided the best crew protection of all self-propelled guns in World War II. However, with a crew of five, a low ceiling in the fighting compartment, and the lack of muzzle brake, the workload was unbearable for the crew from the gun recoil. It had a maximum range of 13,000 metres. Only one prototype was built and it is on display in a Russian armour museum. The self-propelled gun carried 20 rounds of two piece (shell and charge) armour-piercing and high explosive ammunition. The secondary armament of the fighting vehicle consisted of two 12.7 x 108 mm DShK machine guns, one anti-aircraft and one co-axial.
The Object 704 self-propelled howitzer was designed to replace the ISU-152.
The overall height of the vehicle was reduced to 2240 mm, which was compensated with an increased width of the superstructure. The factory designation was Object 704. It was armed with the 152.4 mm ML-20SM
Product Information
Trumpeter's kit is moulded in grey styrene and presented on 15 sprues plus the upper and lower hull halves, 12 sprues are in a rust coloured styrene, it includes one turned aluminium barrel, and a few photo-etched parts. Contains of over 460 parts including the kit with refined detail, multi-slide moulded lower hull, 192 individual tracks links and photo-etched parts.
Item No: 05575
Item Name: Soviet Project 704 SPH
Scale: 1:35
Item Type: Static Kit
Model Brief Length: 244.5mm Width: 97.7mm
Total Parts: 460+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 27, lower hull and upper hull
Released Date: 2014-03
More Features:
The kit consists of over 460 partsIncludes refined detail
Multi-slide moulded lower hull
192 individual tracks links
Photo-etched parts included
Detailed suspension and road wheels
Individual track link assembly to replicate track sag
Nicely detailed DShK anti-aircraft gun
Detailed (massive) main gun mantlet with metal gun barrel
Main gun barrel is movable in azimuth and elevation
Photo-etched rifling insert for tip of gun barrel to replicate howitzer
Basic pioneering tools and external fuel drum storage provided
Trumpeter 1:35 Soviet A-19 122mm Gun Model 1931/37
£36.00 GBP
Trumpeter 1:35 - Soviet A-19 122mm Gun Model 1931/37 - Plastic model kit #02325
122mm corps gun M1931/37 (A-19) was a Soviet field gun developed in late 1930s by combining the barrel of the 122mm gun M1931 (A-19) and the carriage of the 152mm howitzer-gun M1937 (ML-20). The gun was in production from 1939 until 1946. It saw action in World War II (primarily with corps and RVGK artillery of the Red Army) and remained in service for a long time after the end of the war. Vehicle-mounted variants of the gun were fitted to the IS-2 and 3 tanks and ISU-122 self-propelled gun.
Item No: 02325
Item Name: Soviet A-19 122mm Gun Mod.1931/1937
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 284mm, Width 75.4mm
Total Parts: 270+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 8 sprues, frame and tires
Release Date: 2014-04
Additional:
- The kit consists of over 270 parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
Trumpeter 1:35 BS-3 Soviet 100mm Anti-tank Gun M1944
£35.00 GBP
Trumpeter 1:35 - BS-3 Soviet 100mm Anti-tank Gun M1944 - Plastic model kit #02331
The BS-3 was based on a B-34 naval gun. The development team was led by V. G. Grabin. The gun was employed by light artillery brigades of tank armies (20 pieces along with 48 ZiS-3) and by corps artillery. In the Second World War the BS-3 was successfully used as a powerful anti-tank gun. It was capable of defeating any contemporary tank at long range, excluding the Tiger Ausf B: to destroy that heavy tank the gun needed to shoot at less than 1600m from the target. The gun was also used as a field gun. Though in this role it was less powerful than the 122 mm A-19, as it fired a smaller round, the BS-3 was more mobile and had a higher rate of fire.
Item No: 02331
Item Name: Soviet 100mm Anti-tank Gun M1944 (BS-3)
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 256.7mm, Width 59mm
Total Parts: 210+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 7 sprues and tires
Release Date: 2014-01
Additional:
- The kit consists of over 210 parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 Soviet 122mm Howitzer 1938 M-30 Early
£39.00 GBP
Trumpeter 1:35 - Soviet 122mm Howitzer 1938 M-30 Early - Plastic model kit #02343
The 122mm howitzer M1938 (M-30) was a Soviet 121.92mm (4.8 inch) howitzer. The weapon was developed by the design bureau of Motovilikha Plants, headed by F. F. Petrov, in the late 1930s, and was in production from 1939 to 1955. The M-30 saw action in World War II, mainly as a divisional artillery piece of the Red Army (RKKA). Captured guns were also employed later in the conflict by the German Wehrmacht and the Finnish Army. After World War II the M-30 saw combat in numerous conflicts of the mid- to late twentieth century in service of other countries' armies, notably in the Middle East.
Item No: 02343
Item Name: Soviet 122mm Howitzer 1938 M-30 Early Version
Scale: 1:35
Item Type: Static Armour
Model Dimension: Length 310mm, Width 63.3mm
Total Parts: 310+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 6 sprues, frame and tires
Release Date: 2014-09
Additional:
- The kit consists of over 310 parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
Trumpeter 1:35 Soviet 122mm Howitzer 1938 M-30 Late
£39.00 GBP
Trumpeter 1:35 - Soviet 122mm Howitzer 1938 M-30 Late - Plastic model kit #02344
The 122mm howitzer M1938 (M-30) was a Soviet 121.92 mm (4.8 inch) howitzer. The weapon was developed by the design bureau of Motovilikha Plants, headed by F. F. Petrov, in the late 1930s, and was in production from 1939 to 1955. The M-30 saw action in World War II, mainly as a divisional artillery piece of the Red Army (RKKA). Captured guns were also employed later in the conflict by the German Wehrmacht and the Finnish Army. After World War II the M-30 saw combat in numerous conflicts of the mid- to late twentieth century in service of other countries' armies, notably in the Middle East.
Item No: 02344
Item Name: Soviet 122mm Howitzer 1938 M-30 Late Version
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 310mm, Width 63.3mm
Total Parts: 320+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 6 sprues, frame and tires
Release Date: 2015-06
Additional:
- The kit consists of over 320 parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
© 2024 Panzer Models. Prepared by Article.
