American
HobbyBoss 1:35 - Defender 110 Hard Top
Sold Out
The Land Rover Defender was a British 4-wheel sports utility vehicle designed on the basis of the earlier Land Rover Series issued between 1948 and 1985.
The Defender entered production in 1983 under the name of Land Rover 110 which referred to the length of its wheelbase (110 inches or 280 cm). In 1984 the model was improved with wind-up windows and a 2.5-litre diesel engine with the power of 51 kW (68 hp) replacing older 2.3-litre engines. The designation "Defender" was introduced only in late 1990's. At that time 2.5-litre engines evolved into new turbo diesel 200TDi series, however the Defenders for military use were still equipped with 2.5-litre ones.
The Defender 110 was in service with the British and the Commonwealth Armies between 1950's and 1990's. It was also deployed by the US forces during the Gulf War in 1990-1991.
Item No: 82448
Item Name: Defender 110 Hard Top
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 132.6mm, Width 62.9mm
Total Plastic Parts: 190+ pcs
Total Sprues: 6 sprues and tyres
Photo-Etched Parts: 1 piece
Release Date: 2011-06
Additional:
- Consists of over 190 parts, including 19 clear parts
- Refined detail
- Highly detailed engine
- Rubber tires included
- Photo-etched parts for headlights grill provided
HobbyBoss 1:35 M3A1 Scout Car 'White' Early Version
£31.00 GBP
HobbyBoss 1:35 - M3A1 Scout Car 'White' Early Version - Plastic model kit #82451
The U.S. M3A1 Scout Car 'White' was produced from 1940 until 1944 with 20,918 vehicles built in total. The car was used for a number of purposes including patrol and scouting. It also served as a command vehicle, ambulance and gun tractor.
The M3 was used by the cavalry units of the U.S. Army in the North African Campaign, the invasion of Sicily, and a small number of vehicles were deployed in Normandy. The M3A1 was supplied to the Soviet Union and Britain under lend-lease. These vehicles were also used by the Free French Forces as well as Belgian, Czechoslovak and Polish units.
Item No: 82451
Item Name: U.S. M3A1 "White Scout Car" Early Production
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 172mm, Width 74mm
Total Plastic Parts: 240+ pcs
Total Sprues: 10 pcs
Chromeplate Parts: n/a
Camouflage Scheme: US Army
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 1 piece
Release Date: 2011-01
Additional:
- The kit w/refined detail consists of over 240 parts, includes 4 clear parts
- Detailed main tyres
- Photo-etched parts for engine fan, etc.
HobbyBoss 1:35 M3A1 Scout Car 'White' Late Version
Sold Out
HobbyBoss 1:35 - M3A1 Scout Car 'White' Late Version - Plastic model kit #82452
Production of the U.S. 'White' M3A1 scout car (named after its manufacturer, the White Motor Company) started in 1940 with 20,918 vehicles built until 1944. Initially it was used by armoured and reconnaissance units, but it was better suited for road use than for cross-country terrain. During the war the M3A1 was not often used in the dangerous role of a scout vehicle. Trial versions included the M3A1E1 with a diesel engine, the M3A1E2 with an armored roof, and the M3A1E3 mounting a 37mm (1.46 in) gun on a rotating pedestal. By 1943 it became clear that the vehicle had poor off-road mobility and poor armament, and it was replaced with the M8 armoured car and similar M20 Utility Car in most of the US Army units. The M3 was supplied in large numbers under Lend-Lease to the Soviet Union and to Free French forces. After the war, vehicles were exported to Israel and other countries, where they served for many years.
Item No: 82452
Item Name: U.S. M3A1 "White Scout Car" Late Production
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 172mm, Width 74mm
Total Plastic Parts: 240+ pcs
Total Sprues: 10 pcs
Chromeplate Parts: n/a
Camouflage Scheme: US Army
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Accessory: n/a
Release Date: 2011-05
Additional:
- The kit w/refined detail consists of over 240 parts, includes 4 clear parts
- Detailed main tires
- Photo-etched parts for engine fan, etc.
HobbyBoss 1:35 M706 Commando Armoured Car in Vietnam
£23.00 GBP
The M706 Commando was an American armoured car capable of travelling across water. It was designed to transport a crew, first-aid equipment, fire extinguishers and mortar shells. It also served as an anti-tank vehicle.
Featuring the Chrysler V8 engine, four-wheel drive and five-speed manual transmission, the car could move at a maximum speed of 100 km/h on land and 5 km/h across water. The Commando was widely used during the Vietnam War, at that time nicknamed the Duck, or the V. It also performed on the battlefield in Iraq during the Persian Gulf War.
Item No: 82418
Item Name: M706 Commando Armoured Car in Vietnam
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 164.2mm, Width 68.5mm, Height 79.5mm
Total Plastic Parts: 275 pcs
Total Sprues: 7 sprues, lower hull, upper hull, 4 rubber tires
Camouflage Scheme: US Army's Military Police Corps in Vietnam
Metal Parts: Metal chain
Photo Etched Parts: 1 piece
Release Date: 2008-07
Additional:
- The kit consists of 275 parts
- Photo etched parts included
- Rubber tires
HobbyBoss 1:35 RSOV w/MG (Ranger Special Operations Vehicle)
£27.00 GBP
The Ranger Special Operations Vehicle (RSOV) is a light military vehicle used by the U.S. Army's 75th Ranger Regiment. The U.S. Army adopted the RSOV in 1992 in order to replace the M151. For a typical operation the RSOV is equipped with various machine guns.
Item No: 82450
Item Name: (Ranger Special Operations Vehicle) RSOV w/MG
Scale: 1:35
Item Type: Static kit
Model Dimensions: Length 134.6mm Width 55.4mm
Total Plastic Parts: 190+
Total Sprues: 9 sprues and tires
Photo Etched Parts: 1 piece
Release Date: 2012-06
Additional:
- The kit consists of over 190 parts
- Detailed engine with accurate design
- Rubber tires with very good detail
© 2025 Panzer Models. Prepared by Article.
