Soviet
The Soviet Union (1922 - 1991)
WWII and Cold War Soviet 1/35 scale tanks, trucks, plastic figures, paints, weathering sets, buildings and diorama accessories.
Miniart 1:35 - Red Army Drivers
£11.00 GBP
Miniart 1:35 - Red Army Drivers - Plastic Figure Model Kit #35144
This kit represents five Soviet drivers busy with their regular maintenance tasks. Three figures are wearing summer uniforms and 'pilotka' caps. One of them is equipped with a tire pump, the other holds a hand crank, and the third one with his sleeves rolled up has a piece of cloth to wipe dust and dirt off the vehicle.
The other two drivers are dressed in cold weather clothes: one soldier in a greatcoat and 'Ushanka' hat pouring water from a pail and the other is dressed in both a 'Telogreika' jacket and 'Ushanka' hat with his hand positioned to hold a steering wheel.
The kit contains 46 parts.
Includes parts for five figures and accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Soviet Artillery Diorama, Poland 1944
Sold Out
Miniart 1:35 - Poland 1944 - Plastic model kit #36004
In August 1944 the Polish resistance Home Army (Polish: Armia Krajowa) incited an uprising in order to end German occupation and prevent the consolidation of the Red Army in Warsaw. Aimed at restoration of the Polish government-in-exile, the Uprising was against both Nazi and Soviet troops. However, the Germans managed to halt the Soviet advance to Warsaw and defeat Polish resistance. The Uprising was the largest military campaign taken by any resistance movement in Europe in the period of WWII.
This diorama kit features a corner of a ruined building on a base made from vacuum-formed plastic, as well as a ZiS-2 57mm anti-tank gun and a crew of five Soviet soldiers. The crew includes a crew commander, a loader, a gunner, and two other soldiers carrying ammunition supplies. There are special cavities in the base for the gun wheels. Additional parts for a ZIS-3 76.2mm gun are provided.
The kit contains 213 parts.
Includes parts for a ruined building base, a model of artillery gun and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 - Soviet Assault Infantry (Winter Cloaks)
Sold Out
Miniart 1:35 - Soviet Assault Infantry (Winter Cloaks) - Plastic Figure Model Kit #35226
In winter during wartime soldiers of the Red Army wore white cloaks over their regular uniforms and ammunition to disguise themselves in the snow. The cloaks were introduced after the Winter War against Finland (1939 - 1940). They were made of coarse calico and included a loose shirt with a cape and wide trousers. On the sides there were slits to access soldiers' equipment.
The kit contains 58 parts.
It represents five Soviet infantry soldiers in winter camouflage clothing.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Soviet Heavy Artillery Crew, Special Edition
£11.00 GBP
Miniart 1:35 - Soviet Heavy Artillery Crew, Special Edition - Plastic Figure Model Kit #35185
The kit contains 212 parts.
Represents five figures of Soviet soldiers in tank helmets and fur hats. Four ammo-boxes with shells and weapons are included.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Soviet Heavy Artillery Crew, Special Edition (New)
£11.00 GBP
Miniart 1:35 - Soviet Heavy Artillery Crew, Special Edition - Plastic Figure Model Kit #35231
This new special edition kit from Miniart includes parts for the assembly of five figures of Soviet soldiers in tank helmets. Two ammo-boxes with shells and infantry weapons are provided.
Download instructions for this kit here
The kit contains 185 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Soviet Jeep Crew
Sold Out
Miniart 1:35 - Soviet Jeep Crew - Plastic Figure Model Kit #35049
This kit represents a Soviet Jeep crew of WWII including a driver, one guard, junior and senior officers as well as a traffic policewoman with two hand flags.
The kit contains 48 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Soviet Soldiers Taking a Break
£11.00 GBP
Miniart 1:35 - Soviet Soldiers Taking a Break - Plastic Figure Model Kit #35233
This kit represents WWII Soviet soldiers at rest. All figures are sitting or lying down on the ground with their equipment placed nearby. Weapons and equipment are provided.
The kit contains 127 parts.
Includes parts for five figures and accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Soviet Tank Crew at Rest (Special Edition)
£11.00 GBP
Miniart 1:35 - Soviet Tank Crew at Rest (Special Edition) - Plastic Figure Model Kit #35246
This kit includes parts for the assembly of five Soviet tank crew members. Three ammo boxes with shells and weapons are included.
Download instructions for this kit here
The kit contains 116 parts.
Includes parts for five figures and accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - T-80 Soviet Light Tank with Crew
£32.00 GBP
Miniart 1:35 - T-80 Soviet Light Tank with Crew, Special edition with workable track links - Plastic model kit #35243
Based on the earlier T-64 model, the Soviet T-80 is a third-generation main battle tank which entered service in 1976. The T-80 was designed to use a 1,000 horsepower gas turbine, but some later variants have a 750-horsepower diesel engine. The 125mm 2A46 smoothbore gun can fire anti-tank guided missiles and regular ordnance. The production of T-80 for the Russian Army has stopped, but the Omsk plant still produces the tank for export. The T-80 and its variants are in service in Armenia, Belarus, Cyprus, China, Egypt, Kazakhstan, South Korea, Pakistan, Russia, Ukraine and Yemen.
The kit contains 404 parts for the assembly of one tank and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 - WWII Drivers
Sold Out
Miniart 1:35 - WWII Drivers - Plastic Figure Model Kit #35042
The kit represents six drivers of WWII era: two Germans, two Soviets, one American and one British. A variety of figure positions (including a traditional sitting pose) makes the kit perfect for dioramas featuring all kinds of WWII vehicles. It can also be a great addition to a single finished model.
The kit contains 48 parts.
Includes parts for six figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet Artillery Crew on Maneuvere
£20.00 GBP
Miniart 1:35 - Soviet Artillery Crew on Maneuvere - Plastic Figure Model Kit #35081
The Soviet anti-tank gun ZiS-3, also known as the 76-mm divisional gun M1942, was constructed at the Artillery Factory No. 92 in 1940 for the needs of the Red Army suffering enormous losses at the beginning of the Second World War. The gun was developed by V.G. Grabin, a Soviet artillery designer. The ZiS-3 design was based on the F-22USV cannon and the ZiS-2 anti-tank gun. Combining the F-22USV barrel and the ZiS-2 carriage, the ZiS-3 turned out to be far more effective compared to its prototypes. Unlike the F-22USV, the ZiS-3 was equipped with a muzzle brake which allowed to reduce recoil. Besides, its production was a lot easier and cheaper because most parts were manufactured by means of casting, and it was allowed to use materials lower in quality.
During the war, when fast production and large quantities were the highest priority, the ZiS-3 took part in combat without having been put to the tests. However, in the battlefield it proved its superiority over other anti-tank guns and later it was recognised by the authorities and obtained its official name - the divisional field gun model 1942. Due to its high combat effectiveness, the ZiS-3 had the largest share in the field gun production at wartime.
The kit contains 221 parts.
Includes parts for five figures and one anti-tank gun ZiS-3.
Box: 290mm x 190mm x 45mm
Miniart 1:35 Soviet Field Kitchen w/Horses
£32.00 GBP
Miniart 1:35 - Soviet Field Kitchen w/Horses - Plastic Figure Model Kit #35057
The kit contains 240 parts.
Includes parts for two horses, one field kitchen and one soldier.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Soviet Gun ZIS-3 w/Horses
£38.00 GBP
Miniart 1:35 - Soviet Gun ZIS-3 w/Horses - Plastic model kit #35045
The ZiS-3 was a Soviet 76.2mm divisional field gun used during the Second World War. ZiS stood for "Zavod imeni Stalina" ("Factory named after Stalin"), the honorific title of Artillery Factory No. 92, which first constructed the gun.
When the ZiS-3 was first demonstrated to the Soviet authorities, Stalin called this gun "a masterpiece of artillery systems design". The Soviet Union produced over 103,000 ZiS-3 guns.
The kit contains 401 parts.
Includes parts for four horses, limber, gun and seven figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Soviet Naval Troops (Special Edition)
£11.00 GBP
Miniart 1:35 - Soviet Naval Troops (Special Edition) - Plastic Figure Model Kit #35094
Building a Soviet fleet was a national priority, but many senior officers were killed in purges in the late 1930s. When Germany invaded in 1941 and captured millions of soldiers, many sailors and naval guns were detached to reinforce the Red Army; these reassigned naval forces had especially significant roles on land in the battles for Odessa, Sevastopol, Stalingrad, Novorossiysk, Tuapse, and Leningrad. The Baltic fleet was blockaded in Leningrad and Kronstadt by minefields, but the submarines escaped. The surface fleet fought with the anti-aircraft defence of the city and bombarded German positions.
Through Lend-Lease, the U.S. and Britain gave the USSR ships with a total displacement of 810,000 tons. The composition of the Soviet fleets in 1941 included 3 aged battleships, 7 cruisers, 59 destroyer-leaders and squadron-destroyers, 218 submarines, 269 torpedo boats, 22 patrol vessels, 88 minesweepers, 77 submarine-hunters, and a range of other smaller vessels.
During the war, many of the vessels on the slips in Leningrad and Nikolayev were destroyed (mainly by aircraft and mines), but the Soviet Navy received captured Romanian destroyers and Lend-Lease small craft from the U.S., as well as the old Royal Navy battleship HMS Royal Sovereign (renamed Arkhangelsk) and the United States Navy cruiser USS Milwaukee (renamed Murmansk) in exchange for the Soviet part of the captured Italian navy.
From the beginning of hostilities, Soviet Naval Aviation provided air support to naval and land operations involving the Soviet Navy. This service was responsible for the operation of shore-based floatplanes, long-range flying boats, catapult-launched and vessel-based planes, and land-based aircraft designated for naval use.
The kit contains 154 parts.
Includes parts for five figures, weapons and equipment.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet officers at field briefing Special Edition
£14.00 GBP
Miniart 1:35 - Soviet officers at field briefing - Plastic Figure Model Kit #35365
The kit contains 49 parts.
Includes parts for five Soviet officers.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet Soldiers at Rest (Special Edition)
Sold Out
Miniart 1:35 - Soviet Soldiers at Rest (Special Edition) - Plastic Figure Model Kit #35109
The kit contains 134 parts.
Includes parts for five figures, weapons and equipment.
Box: 260mm x 162mm x 35m
Miniart 1:35 Soviet T-70 M & ZiS-3 w/Crew
Sold Out
Miniart 1:35 - Soviet T-70 M & ZiS-3 w/Crew - Plastic model kit #35056
The Soviet T-70 was a light tank used during the Second World War. It was intended to replace two other tanks: the T-60 scout tank and the T-50 light infantry tank. The T-70 had a 45mm L/46 gun Model 38 and a coaxial 7.62mm DT machine gun. The maximum armour thickness was 60mm (on the turret front). The first tanks produced had a serious problem with the arrangement of engines, and were soon redesigned as the T-70M tanks, although they continued to be referred to as T-70. The production started in 1942 and ended in 1943, with 8,226 vehicles completed. The tank remained in service until 1948.
The ZiS-3 was a Soviet 76.2mm divisional field gun used during the Second World War. ZiS stood for "Zavod imeni Stalina" ("Factory named after Stalin"), the honorific title of the factory which first constructed this gun. When the ZiS-3 was first demonstrated to the Soviet authorities, Stalin called it "a masterpiece of artillery systems design". The Soviet Union produced over 103,000 ZiS-3 guns.
The kit contains 470 parts.
Includes parts for tank with gun and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 USV-BR 76mm Gun Mod.1941 with Limber and Crew
£35.00 GBP
Miniart 1:35 - USV-BR 76mm Gun Mod.1941 with Limber and Crew - Plastic model kit #35129
The USV was a Soviet 76 mm cannon issued in 1939 for the demands of the Red Army. The gun was classified as "divisional" because it was specifically meant for batteries under the direct command of division headquarters. Based on the previous F-22 design, the USV gun was also called the F-22 USV.
By 1940 over a thousand units were ready, and in 1941 when the plan for divisional guns was fulfilled, the production stopped, however not for long. With the German invasion of the Soviet Union the production was reopened at the Barrikady factory in Stalingrad and No. 92 Plant in Nizhny Novgorod. The relaunched model was designated the USV-BR. It was widely deployed in 1941, the first year of the Great Patriotic War. Over eight thousand units were built in the following two years, but by the end of 1942 the USV-BR was completely replaced by the simpler and cheaper ZiS-3.
The kit contains 329 parts.
Includes parts for a Soviet USV-BR gun with a 52-R-353M limber (Mod. 1942), five figures and six ammunition boxes with shells.
Box: 345mm x 240mm x 70mm
Additional:
- 31 photo etched parts
- Highly detailed model
- Decals included
- The limber can be assembeled as a horse drawn limber or a vehicle towed one
- A slide moulded barrel
- Ability to elevate the gun and show recoil
- The slot in the shield can be open or closed
- The gun can be assembled in action or in a towed state
The ammunition boxes include:
- 12 armour-piercing shells
- 12 high-explosive shells
- 12 fragmentation shells
- 6 used cartridges for high-explosive shells
- 6 used cartridges for armour-piercing shells
© 2024 Panzer Models. Prepared by Article.
