Winter Sale! Use code Winter30
Use code Winter30 to get 30% off your order of these products! Offer open for a limited time only.
HobbyBoss 1:35 German Pz. Kpfw. II Ausf. J (VK16.01) Early
£23.00 GBP
The Panzer II tanks were produced from 1935 till 1943 and played an important role in the early years of WWII. By 1940-41 they were supplanted by the Panzer III's and Panzer IV's. The Pz.Kpfw.II was used during the Polish and French campaigns, in North Africa against the British, and on the Eastern Front against the Red Army.
The Panzer II Ausf. D, Ausf. E, Ausf. F and Ausf. L were designed as reconnaissance tanks. Continued development of the reconnaissance tank concept led to the much up-armored Ausf. J, which used the same concept as the Pz. Kpfw.I Ausf. F of the same period and had an experimental designation VK1601. This version had heavier armour, with protection brought up to 80mm on the front and 50mm on the sides and rear. With 25mm roof and floor plates, the Pz. Kpfw. II Ausf. J had a total weight of 18 tons. It was equipped with the same Maybach HL45P as the Pz. Kpfw.I Ausf. F, and its top speed was reduced to 31 km/h. Primary armament was the 2cm KwK38 L/55 gun.
22 of these tanks were produced between April and December 1942, and seven were issued to the 12th Panzer Division on the Eastern Front.
Item No: 83803
Item Name: German Pz. Kpfw. II Ausf. J (VK16.01)
Scale: 1:35
Item Type: Static kit
Model Dimensions: Length 124.6mm, Width 82.5mm
Total parts: 300+
Total Sprues: 10 sprues, upper hull and lower hull
Photo Etched Parts: 1 piece
Release Date: 2013-05
Additional:
- The kit consists of over 300 parts
- Multi-directional slide molded lower hull w/fine detail
- Photo-etched parts included
HobbyBoss 1:35 German VK1602 Leopard
£30.00 GBP
The German VK1602 Leopard was designed in 1942 as a reconnaissance tank based on the Pz. Kpfw. II Ausf. J (VK 1601). It was planned to finish the first prototype by the 1st of September 1942, and the serial production was scheduled for April 1943. However, the project was abandoned when the first prototype was still incomplete. The reason for cancellation was that the tank's gun, the 50 mm L/60, was insufficient to fight against modern Soviet and Western tanks, which made the vehicle vulnerable. Moreover, the Leopard had a very high weight (21900 kg). The fact that the Leopard was similar to the Panther meant that a reconnaissance Panther could be developed and produced at lower cost.
Item No: 82460
Item Name: German VK1602 LEOPARD
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 161.78mm, Width 88.40mm
Total Plastic Parts: 653 pcs
Total Sprues: 19 sprues, upper hull and lower hull
Chromeplate Parts: n/a
Camouflage Scheme: German ARMY
Photo Etched Parts: 1 piece
Release Date: 2010-08
Additional:
- 2-directional slide moulded turret
- 2-directional slide moulded lower hull
- 144 individual track links in light grey plastic
HobbyBoss 1:35 German Panther Ausf. D Flak Bergepanther
£48.00 GBP
The German Panzerkampfwagen V Panther (or Panzer V) was deployed on the Eastern and Western Fronts from mid 1943 till the end of the war in 1945. It was primarily intended to counter the Soviet T-34 and substitute the Panzer III and Panzer IV tanks. Where the Panzerkampfwagen V Panther is generally considered to be the most well-known German tank of WW2, the Panther and the Soviet T-34/85 are considered to be the best all-round tanks of their time. The variations or models are Panther Ausf. A, Panther Ausf. D, Panther Ausf. G, Panther Ausf. F. There is also a considerable quantity of modified models such as maintenance or air defense tanks.
Item No: 82492
Item Name: German Panther Ausf. D Flak Bergepanther
Scale: 1:35
Item Type Static kit
Total Plastic Parts 1000+
Total Sprues: 31 sprues, upper hull and lower hull
Metal Part: Stainless steel net
Photo Etched Parts: 3 pieces
Release Date: 2012-05
Additional:
- Two-directional slide moulded lower hull & upper hull
- 190 individual track links
HobbyBoss 1:35 Soviet T-24 Medium Tank
£35.00 GBP
The T-24 was a Soviet medium tank produced at the KhPZ factory (Kharkiv Locomotive Factory, Ukraine) in 1931. It had a 45mm main gun, a ball-mount 7.62mm DT machine gun in the hull, and two more guns in the turret and in the secondary turret. The vehicle was considered well-armoured for its time, but it had problems with the engine and transmission. Due to these problems the T-24 was found unreliable. Only 24 tanks were built, and they were used only for training and parades. However, this failure gave the KhPZ factory production experience which was applied later in adopting production of the U.S. Christie tank as the BT tank series.
Item No: 82493
Item Name: Soviet T-24 Medium Tank
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 182mm, Width 80mm
Total Plastic Parts: 380+
Total Sprues: 20 sprues, lower hull, upper hull and turret
Chromeplate Parts: n/a
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Accessory: n/a
Release Date: 2012-10
Additional:
- Multi-directional slide molded lower hull and upper hull
- Multi-directional slide molded w/fine detail
- 144 individual track links
- Photo-etched parts included
© 2025 Panzer Models. Prepared by Article.
