WWII
The Second World War (1939 - 1945)
1/35 scale WWII models and accessories - tanks, armoured vehicles, plastic and resin figures, paints, weathering products, painting guides, scenics, buildings and more.
HobbyBoss 1:35 - German Leichter Panzerspahwagen (Sd.Kfz.221) - Late
£23.00 GBP
The first model of the Leichter Panzerspähwagen series, the Sd.Kfz.221 was a light four-wheel drive armoured car equipped with a 7.92 mm Maschinengewehr 13 machine gun and designed for carrying a two members crew. Later, the Maschinengewehr 13 was replaced with an anti-tank rifle Panzerbüchse 39 in order to increase the fire power. Due to its small size and thin armour the vehicle was recognised as inefficient; the production stopped in 1940 with over 300 vehicles produced for the army.
Item No: 83814
Item Name: German Le.Pz.Sp.Wg (Sd.Kfz.221) Leichter Panzerspahwagen - Late
Scale: 1:35
Item Type: Plastic model armour kit
Model Dimension: Length 134mm, Width 57.2mm
Total Plastic Parts: 340+ pcs
Total Sprues: 14 sprues, upper hull, lower hull, tires
Photo Etched Parts: 2 pcs
Release Date: 2015-11
Additional:
- Fully detailed interior
- Multi-directional slide moulded upper hull
- Two-directional slide moulded lower hull
- Four rubber tires
HobbyBoss 1:35 - German Sd.Kfz.221 Leichter Panzerspahwagen (1st Series)
£23.00 GBP
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. The first model of the series, the Sd.Kfz.221 was armed with a 7.92 mm Maschinengewehr 13 machine gun and designed for carrying a two man crew. Due to its small size and thin armour the vehicle was recognised as inefficient and in 1940 went out of production.
Item No: 83811
Item Name: German Sd.Kfz.221 Leichter Panzerspahwagen (1st Series)
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 134mm, Width 57mm
Total Plastic Parts: 310+ pcs
Total Sprues: 14 sprues, upper hull, lower hull
Photo Etched Parts: 2 pcs
Release Date: 2015-04
Additional:
- Fully detailed interior
- Multi-directional slide moulded upper hull
- Two-directional slide moulded lower hull
- Four rubber tires
HobbyBoss 1:35 - Leichter Panzerspahwagen (2cm) Mid Version
£23.00 GBP
The Leichter Panzerspähwagen was a German light armoured car produced from 1935 until 1944. Germany developed several variants of this vehicle. The Sd. Kfz. 222 was an improved version of the Sd. Kfz. 221, armed initially with a 2cm KwK 30 L/55 and a 7.92mm MG 13. Later on the MG 13 machine gun was replaced by the Maschinengewehr 34, and the KwK 30 was replaced by the KwK 38 of the same calibre. This variant of the vehicle was called the Leichter Panzerspähwagen 2 cm. Its production ran from 1937 to 1943 with nearly a thousand vehicles built in total.
The Sd. Kfz. 222 proved to be very efficient in the Balkans in 1941. Large numbers of these armoured cars were also sent to North Africa, however the limited volume of their fuel tanks meant the lack of effective range. The Sd. Kfz. 222 was gradually substituted with the Sd.Kfz.250/9 (Hanomag). A small number of vehicles were sold to China in 1939.
Item No: 80149
Item Name: German Leichter Panzerspahwagen (2cm) Mid Version
Scale: 1:35
Item Type: Plastic Model Armour Kit
Release Date: 2017-07
HobbyBoss 1:35 - M35 Mittlere Panzerwagen (ADGZ-Steyr)
£36.00 GBP
The Steyr ADGZ was developed for the Austrian Army by Austro-Daimler (which later merged with Steyr Automobile) from 1934 and delivered to the army in 1935-1937. In "ADGZ", "AD" stands for "Austro-Daimler". Its Austrian designation was M35 Mittlere Panzerwagen. During the Anschluss - the annexation of Austria into Nazi Germany - the Austrian army had 12 ADGZ armoured cars in use, and 15 more were used by the police. The Germans started using the ADGZ for police work and some vehicles were used by the SS on the Eastern Front and the Balkans. In 1942, the SS received 25 additional ADGZ cars.
The ADGZ was suitable for both urban usage and for maneuvering off-road. It had 6mm armour and weighed 12 tons. Either end of the vehicle was capable of driving the unit: drivers could operate the vehicle from the front or the rear switching almost immediately due to the dual transmission.
Item No: 83890
Item Name: M35 Mittlere Panzerwagen (ADGZ-Steyr)
Scale: 1:35
Item Type: Plastic model armour kit
Model Dimension: Length 180.3mm, Width 66.4mm
Total Plastic Parts: 310+
Total Sprues: 6 sprues, upper hull, lower hull and tyres
Photo Etched Parts: 1 piece
Release Date: 2017-04
Additional:
- The kit consists of over 310 parts
- The kit with refined detail
- Photo etched parts included
- Rubber tyres
HobbyBoss 1:35 - Sd.Kfz.222 Leichter Panzerspahwagen 2cm
£32.00 GBP
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. It had the standard sPkw I Horch 801 chassis and a 67 kW (90 hp) Horch 3.5 petrol engine, which gives it a road speed of 80 km/h and a cross-country speed of 40 km/h. The car had a maximum range of 300 km. Its armament consisted of one 2 cm KwK 30 L/55 main cannon and one MG 34 secondary machine gun.
The Leichter Panzerspähwagen was used by the reconnaissance battalions of the Panzer divisions. It performed well enough in countries with good road networks, like Western Europe, but on the Eastern Front and in North Africa it was hampered by its relatively poor off-road performance and was gradually replaced in the reconnaissance role by the Sdkfz 250 half-track.
Item No: 82442
Item Name: Sd.Kfz.222 Leichter Panzerspahwagen 2cm
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 131.55mm Width 60.5mm
Total Plastic Parts: 297 pcs
Total Sprues: 5 sprues, upper hull, lower hull and 4 tires
Camouflage Scheme: Deutsches Afrika Korps (DAK)
Photo Etched Parts: 3 pcs
Release Date: 2009-11
Additional:
- Fully detailed Interior
- Multi-directional slide moulded upper hull
- Two-directional slide moulded lower hull
- Photo-etched parts included
HobbyBoss 1:35 German Sd. Kfz. 254 Tracked Armoured Scout Car
£37.00 GBP
The Saurer company started to develop the vehicle in 1936 as an artillery tractor for the Austrian army. The first tractors were produced in 1938. About 12 vehicles were made prior to Anschluss (incorporation of Austria into Nazi Germany, March 1938). After the Anschluss production continued. A total of 140 units were built with the new designation RK-7 (Räder-Kettenfahrgestell), although Wehrmacht called them Sd. Kfz. 254. The vehicle had a wheel/track layout and a diesel motor. The wheels were lowered when it was used on roads and retracted for cross-country movement. Some Sd. Kfz. 254's served as artillery observation vehicles for the Afrika Korps after being fitted with a radio and rail antenna.
Item No: 82491
Item Name: German Sd. Kfz. 254 Tracked Armoured Scout Car
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 123.8mm, Width 64.8mm
Total Plastic Parts: 520+
Total Sprues: 20 sprues, upper hull, lower hull and tires
Photo Etched Parts: 1 piece
Release Date: 2012-05
Additional:
- The kit consists of over 520 parts
- Multi-directional slide moulded lower hull and upper hull
- Rubber tires have very good details
- 324 individual tracks links
- Photo-etched parts included
HobbyBoss 1:35 German Sd.Kfz.221 Leichter Panzerspahwagen (3rd Series)
£23.00 GBP
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. It had the standard sPkw I Horch 801 chassis and a 67 kW (90 hp) Horch 3.5 petrol engine, which give it a road speed of 80 km/h and a cross-country speed of 40 km/h. The car had a maximum range of 300 km.
Used by the reconnaissance battalions of the Panzer divisions, the Leichter Panzerspähwagen performed well enough in countries with good road networks, like Western Europe. However, on the Eastern Front and in North Africa these vehicles were hampered by their relatively poor off-road performance, and were gradually replaced in the reconnaissance role by the Sdkfz 250 half-track.
Item No: 83812
Item Name: German Sd.Kfz.221 Leichter Panzerspahwagen (3rd Series)
Scale: 1:35
Item Type Static kit
Total Plastic Parts 320+
Total Sprues: 13 sprues, upper hull, lower hull and tires
Metal Part: Stainless steel net
Photo Etched Parts: 2 pieces
Release Date: 2015-08
Additional:
- Fully detailed Interior
- Multi-directional slide moulded Upper hull
- Two-directional slide moulded Lower hull
- Four rubber tires w/fine detail
- Photo-etched parts included
HobbyBoss 1:35 German Sd.Kfz.222 Leichter Panzerspahwagen (1st Series)
Sold Out
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. It had the standard sPkw I Horch 801 chassis and a 67 kW (90 hp) Horch 3.5 petrol engine, which give it a road speed of 80 km/h and a cross-country speed of 40 km/h. The car had a maximum range of 300 km.
The Leichter Panzerspähwagen was used by the reconnaissance battalions of the Panzer divisions. It performed well enough in countries with good road networks, like Western Europe, but on the Eastern Front and in North Africa it was hampered by its relatively poor off-road performance and was gradually replaced in the reconnaissance role by the Sdkfz 250 half-track.
Item No: 83815
Item Name: German Sd.Kfz.222 Leichter Panzerspahwagen (1st Series)
Scale: 1:35
Item Type Static kit
Model Dimensions: Length 130.5mm, Width 59.5mm
Total Plastic Parts 310+
Total Sprues: 14 sprues, upper hull, lower hull and tires
Metal Parts: n/a
Photo Etched Parts: 3 pieces
Release Date: 2014-05
Additional:
- Fully detailed Interior
- Multi-directional slide moulded Upper hull
- Two-directional slide moulded Lower hull
- Four rubber tires w/fine detail
- Photo-etched parts included
HobbyBoss 1:35 German Sd.Kfz.223 Leichter Panzerspahwagen (1st Series)
Sold Out
The German Sd.Kfz.223 belonged to a series of light four-wheel drive armoured vehicles named the Leichter Panzerspähwagen. They were produced from 1936 to 1944.
The vehicle design was based on the principle of reliability and simplicity. It was suited for off-road conditions and could run on various grades of fuel.
Carrying a 7.92 mm Maschinengewehr 13 machine gun, the Sd.Kfz.223 was basically armed as lightly as the first Sd.Kfz.221 vehicles, but it was additionally equipped with a frame antenna and a midrange radio set.
Item No: 83817
Item Name: German Sd.Kfz.223 Leichter Panzerspahwagen (1st Series)
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 130.6mm, Width 59.3mm
Total Plastic Parts: 310+
Total Sprues: 14 sprues, upper hull, lower hull and tyres
Photo Etched Parts: 3 pcs
Release Date: 2016-02
Additional:
- The kit consists of over 310 parts
- Detailed interior
- Multi-directional slide moulded upper and lower hulls
- Photo etched parts included
- Rubber tyres
HobbyBoss 1:35 GMC Bofors 40mm Gun
Sold Out
The U.S. Army cargo truck GMC CCKW was produced from 1941 until 1945 and saw service in the Second World War and the Korean War. The US Army needed a transport vehile that would be easy to manufacture and capable of being transported by the Navy. The GMC - General Motors Truck Company - won the contract in 1941 and by the end of the war over 562 thousand vehicles were produced.
Apart from its function as a transport vehicle, the GMC CCKW was also used for food and ammunition resupply and as a medical evacuation vehicle. The GMC CCKW 353 equipped with the Bofors 40 mm gun was a French version of the vehicle used almost exclusively by the Free French Army. It also saw service in Algeria and Indochina.
Item No: 82459
Item Name: GMC Bofors 40mm Gun
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 219.50 mm, Width 75.00 mm
Total Plastic Parts: 380+
Total Sprues: 13 sprues and poly cap
Photo-Etched Parts: 1 pc
Release Date: 2011-11
Additional:
- The kit consists of over 380 parts
- Includes 8 clear parts
- Details finely represented by newly tooled parts
- Main tyres with very good detail
- Photo-etched parts included
HobbyBoss 1:35 M3A1 Scout Car 'White' Early Version
£31.00 GBP
HobbyBoss 1:35 - M3A1 Scout Car 'White' Early Version - Plastic model kit #82451
The U.S. M3A1 Scout Car 'White' was produced from 1940 until 1944 with 20,918 vehicles built in total. The car was used for a number of purposes including patrol and scouting. It also served as a command vehicle, ambulance and gun tractor.
The M3 was used by the cavalry units of the U.S. Army in the North African Campaign, the invasion of Sicily, and a small number of vehicles were deployed in Normandy. The M3A1 was supplied to the Soviet Union and Britain under lend-lease. These vehicles were also used by the Free French Forces as well as Belgian, Czechoslovak and Polish units.
Item No: 82451
Item Name: U.S. M3A1 "White Scout Car" Early Production
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 172mm, Width 74mm
Total Plastic Parts: 240+ pcs
Total Sprues: 10 pcs
Chromeplate Parts: n/a
Camouflage Scheme: US Army
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 1 piece
Release Date: 2011-01
Additional:
- The kit w/refined detail consists of over 240 parts, includes 4 clear parts
- Detailed main tyres
- Photo-etched parts for engine fan, etc.
HobbyBoss 1:35 M3A1 Scout Car 'White' Late Version
Sold Out
HobbyBoss 1:35 - M3A1 Scout Car 'White' Late Version - Plastic model kit #82452
Production of the U.S. 'White' M3A1 scout car (named after its manufacturer, the White Motor Company) started in 1940 with 20,918 vehicles built until 1944. Initially it was used by armoured and reconnaissance units, but it was better suited for road use than for cross-country terrain. During the war the M3A1 was not often used in the dangerous role of a scout vehicle. Trial versions included the M3A1E1 with a diesel engine, the M3A1E2 with an armored roof, and the M3A1E3 mounting a 37mm (1.46 in) gun on a rotating pedestal. By 1943 it became clear that the vehicle had poor off-road mobility and poor armament, and it was replaced with the M8 armoured car and similar M20 Utility Car in most of the US Army units. The M3 was supplied in large numbers under Lend-Lease to the Soviet Union and to Free French forces. After the war, vehicles were exported to Israel and other countries, where they served for many years.
Item No: 82452
Item Name: U.S. M3A1 "White Scout Car" Late Production
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 172mm, Width 74mm
Total Plastic Parts: 240+ pcs
Total Sprues: 10 pcs
Chromeplate Parts: n/a
Camouflage Scheme: US Army
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Accessory: n/a
Release Date: 2011-05
Additional:
- The kit w/refined detail consists of over 240 parts, includes 4 clear parts
- Detailed main tires
- Photo-etched parts for engine fan, etc.
HobbyBoss 1:35 Sd. Kfz. 223
£27.00 GBP
HobbyBoss 1:35 - Sd. Kfz. 223 Leichter Panzerspahwagen Funk - Plastic model kit #82443
The German Leichter Panzerspahwagen was a series of light four-wheel drive armoured cars produced from 1935 to 1944. The base model, Sd. Kfz. 221, was armed with a single 7.92mm Maschinengewehr 13 machine gun and was in production from 1935 to 1940 with at least 339 vehicles produced. The next version, Sd. Kfz. 222, had a 2cm KwK 30 L/55 autocannon and a 7.92mm MG 13 machine gun. A total of 990 vehicles were produced from 1937 till 1943. The Sd. Kfz. 223 was similar to the Sd. Kfz. 221, but was equipped with a frame antenna and a radio set. Initially it was armed with a 7.92mm MG 13 machine gun, but it was changed to a Maschinengewehr 34 in 1938. This model was manufactured from 1936 to 1944. At least 567 Sd. Kfz. 223 cars were produced for the army.
Item No: 82443
Item Name: Sd. Kfz. 223 Leichter Panzerspahwagen Funk
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 131.55mm, Width 60.5mm
Total Plastic Parts: 251 pcs
Total Sprues: 5 sprues, upper hull, lower hull and 4 tires
Chromeplate Parts: n/a
Camouflage Scheme: German Army
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 2pcs
Film Accessory: n/a
Release Date: 2010-03
Additional:
- Multi-directional slide moulded upper hull
- Two-directional slide moulded lower hull
- Photo-etched parts included
HobbyBoss 1:35 Soviet BA-20M Armoured Car
£29.00 GBP
The BA-20 Soviet armoured car was developed in 1934. Its full production started in 1935 and ran until the first months of 1942. In the early stages of WWII the car was used mainly as a scout vehicle.
The crew consisted of two people - a driver and a commander (gunner). The vehicle's tyres were resistant to bullets and it was the first armoured car produced by the Soviet Union that had an escape hatch in the floor between the chassis legs. The BA-20M was an improved version of the BA-20: command vehicles of this type had a whip antenna as opposed to the clothes-rail antenna on the command versions of the BA-20.
The BA-20M armoured car was deployed during the Battles of Khalkhyn Gol in 1939, the Soviet invasion of Poland in 1939, the Winter War between the Soviet Union and Finland in 1939-1940, and the annexation of the Baltic Republics - Estonia, Latvia and Lithuania in 1940. The BA-20 then saw combat during the early phases of the Great Patriotic War. Some vehicles were captured by the German army and were designated Panzerspahwagen BA-202 (r).
Item No: 83884
Item Name: Soviet BA-20M Armoured Car
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 128mm, Width 50.8mm
Total Plastic Parts: 150+
Total Sprues: 7 sprues, upper hull and tyres
Photo Etched Parts: 1
Release Date: 2017-03
Additional:
- The kit consists of over 250 parts
- The kit with refined detail
- Multi-slide moulded turret and hull
- Photo-etched parts included
- Rubber tyres
© 2024 Panzer Models. Prepared by Article.
