WWII
The Second World War (1939 - 1945)
1/35 scale WWII models and accessories - tanks, armoured vehicles, plastic and resin figures, paints, weathering products, painting guides, scenics, buildings and more.
Trumpeter 1:35 20mm Flakvierling 38 auf Selbstfahrlafette
Sold Out
Trumpeter 1:35 - German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version) - Plastic model kit #01524
The Flak 38 was a German 20mm anti-aircraft gun used throughout WWII which became the most numerously produced German artillery piece of the period. The 20mm Flakvierling 38 auf Selbstfahrlafette (Sd. Kfz. 7/1) was the result of combining the 20mm Flakvierling 38 with four Flak 38 guns and the Sd. Kfz. 7 half-track, to provide greater mobility and firepower. The Sd. Kfz. 7/1 carried 600 2cm rounds on board and 1800 rounds in the towed Sd. Ah. 56 trailer. The guns had the 360 degrees traverse by hand and could be elevated from -10 to +100 degrees. The later versions also included an armoured cab for better protection of the crews. A crew of 10 included a gun commander, eight gunners and a driver.
The first 100 vehicles were produced in 1940-1941 and production continued at a rate of 10 vehicles per month until August 1942, when the monthly rate was significantly increased. Around 800 vehicles were produced by December 1944. From 1942, most vehicles were fitted with lightly armoured driver cabs and a plate to protect the engine compartment. The armour was 8mm thick. These vehicles were issued to Flak units of the Luftwaffe and Panzer units of the German Army. Sd. Kfz. 7/1 units were used to protect armoured units against low flying aircraft but were also successfully used against ground targets.
The kit represents a late version of the Sd.Kfz.7/1 with a 20mm Flakvierling 38. Early versions featured the central circular pivot mounting for the 20mm Flakvierling 38. Later versions had a normal ground mounting fitted to the rear bed which allowed the gun to be easily removed and mounted on the standard Flakvierling Sd. Ah. 52 trailer if necessary.
Item No: 01524
Item Name: German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version)
Scale: 1:35
Item Type: Static Armour
Model Dimensions: Length 312.5mm, Width 69mm, Height 107mm
Total Parts: 859 pcs
Metal Parts: Brass wire
Photo Etched parts: 5 frets
Total Sprues: 20 pcs sprues, 3 rubber tyres and an armoured cab
Paint Schemes: Markings are provided for vehicles in dark yellow with red brown and green camouflage scheme
Release date: 2009-07
Additional:
- New tooled slide-moulded one-piece late type KM m11 mudguard
- Side panels and the top panel of the engine hood can be opened
Trumpeter 1:35 BS-3 Soviet 100mm Anti-tank Gun M1944
£35.00 GBP
Trumpeter 1:35 - BS-3 Soviet 100mm Anti-tank Gun M1944 - Plastic model kit #02331
The BS-3 was based on a B-34 naval gun. The development team was led by V. G. Grabin. The gun was employed by light artillery brigades of tank armies (20 pieces along with 48 ZiS-3) and by corps artillery. In the Second World War the BS-3 was successfully used as a powerful anti-tank gun. It was capable of defeating any contemporary tank at long range, excluding the Tiger Ausf B: to destroy that heavy tank the gun needed to shoot at less than 1600m from the target. The gun was also used as a field gun. Though in this role it was less powerful than the 122 mm A-19, as it fired a smaller round, the BS-3 was more mobile and had a higher rate of fire.
Item No: 02331
Item Name: Soviet 100mm Anti-tank Gun M1944 (BS-3)
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 256.7mm, Width 59mm
Total Parts: 210+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 7 sprues and tires
Release Date: 2014-01
Additional:
- The kit consists of over 210 parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 Soviet 122mm Howitzer 1938 M-30 Early
£39.00 GBP
Trumpeter 1:35 - Soviet 122mm Howitzer 1938 M-30 Early - Plastic model kit #02343
The 122mm howitzer M1938 (M-30) was a Soviet 121.92mm (4.8 inch) howitzer. The weapon was developed by the design bureau of Motovilikha Plants, headed by F. F. Petrov, in the late 1930s, and was in production from 1939 to 1955. The M-30 saw action in World War II, mainly as a divisional artillery piece of the Red Army (RKKA). Captured guns were also employed later in the conflict by the German Wehrmacht and the Finnish Army. After World War II the M-30 saw combat in numerous conflicts of the mid- to late twentieth century in service of other countries' armies, notably in the Middle East.
Item No: 02343
Item Name: Soviet 122mm Howitzer 1938 M-30 Early Version
Scale: 1:35
Item Type: Static Armour
Model Dimension: Length 310mm, Width 63.3mm
Total Parts: 310+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 6 sprues, frame and tires
Release Date: 2014-09
Additional:
- The kit consists of over 310 parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
Trumpeter 1:35 Soviet 122mm Howitzer 1938 M-30 Late
£39.00 GBP
Trumpeter 1:35 - Soviet 122mm Howitzer 1938 M-30 Late - Plastic model kit #02344
The 122mm howitzer M1938 (M-30) was a Soviet 121.92 mm (4.8 inch) howitzer. The weapon was developed by the design bureau of Motovilikha Plants, headed by F. F. Petrov, in the late 1930s, and was in production from 1939 to 1955. The M-30 saw action in World War II, mainly as a divisional artillery piece of the Red Army (RKKA). Captured guns were also employed later in the conflict by the German Wehrmacht and the Finnish Army. After World War II the M-30 saw combat in numerous conflicts of the mid- to late twentieth century in service of other countries' armies, notably in the Middle East.
Item No: 02344
Item Name: Soviet 122mm Howitzer 1938 M-30 Late Version
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 310mm, Width 63.3mm
Total Parts: 320+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 6 sprues, frame and tires
Release Date: 2015-06
Additional:
- The kit consists of over 320 parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
Trumpeter 1:35 Soviet A-19 122mm Gun Model 1931/37
£36.00 GBP
Trumpeter 1:35 - Soviet A-19 122mm Gun Model 1931/37 - Plastic model kit #02325
122mm corps gun M1931/37 (A-19) was a Soviet field gun developed in late 1930s by combining the barrel of the 122mm gun M1931 (A-19) and the carriage of the 152mm howitzer-gun M1937 (ML-20). The gun was in production from 1939 until 1946. It saw action in World War II (primarily with corps and RVGK artillery of the Red Army) and remained in service for a long time after the end of the war. Vehicle-mounted variants of the gun were fitted to the IS-2 and 3 tanks and ISU-122 self-propelled gun.
Item No: 02325
Item Name: Soviet A-19 122mm Gun Mod.1931/1937
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 284mm, Width 75.4mm
Total Parts: 270+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 8 sprues, frame and tires
Release Date: 2014-04
Additional:
- The kit consists of over 270 parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
Trumpeter 1:35 Soviet Limber 52-R-353M Mod 1942
£10.00 GBP
Trumpeter 1:35 - Soviet Limber 52-R-353M Mod 1942 - Plastic model kit #02345
This kit includes parts for the 52-R-353M limber used by the Red Army for 76.2 mm regiment and division artillery. Usually pulled by four horses, the limber also served as an ammunition truck.
Item No: 02345
Item Name: Soviet Limber 52-R-353M Mod 1942
Scale: 1:35
Item Type: Static Kit
Model Dimensions: Length 135.6mm, Width 45.6mm
Total Parts: 80+
Photo Etched Parts: 1 piece
Total Sprues: 2 sprues and tires
Release Date: 2015-09
Additional:
- The kit consists of over 80 parts
- Refined detail
- Photo Etched parts included
- Rubber tires
Trumpeter 1:35 Soviet ML-20 152mm Howitzer Mod 1937
£36.00 GBP
Trumpeter 1:35 - Soviet ML-20 152mm Howitzer Mod 1937 - Plastic model kit #02323
The Soviet 152mm howitzer-gun ML-20 (Model 1937) was an upgrade of the 152mm gun M1910/34. This gun was produced from 1937 to 1946. As a howitzer-gun, the ML-20 could be used both as a howitzer and as a gun. To achieve this, the model had a wide range of elevation angles and used separate loading with 13 different propellant loads. The ML-20 had both telescopic and panoramic sights. The ML-20 first saw combat in the Battle of Khalkhin Gol. It also participated in the Winter War and proceeded to be used throughout the Second World War. The ML-20 was used during WWII by the Soviet Army, and some of the guns were captured by the Germans and the Finnish Army. The ML-20 was also used after the end of World War II in a number of conflicts due to its excellent characteristics.
Item No: 02323
Item Name: Soviet ML-20 152mm Howitzer Mod1937 (Standard)
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 251.8mm, Width 75.4mm
Total Parts: 280+
Metal Parts: gun barrel
Photo Etched Parts: 2 pcs
Total Sprues: 8 sprues, bracket and tire
Release Date: 2012-09
Additional:
- The kit consists of 280+ parts, 2 pieces of Photo Etched parts
- Details are finely represented by newly tooled parts
- Rubber tires
- Metal gun barrel
Trumpeter 1:35 Soviet Project / Object 704 SPH Howitzer
£64.00 GBP
Trumpeter 1:35 Soviet Project / Object 704 SPH Howitzer - Plastic model kit #TRU05575
As Soviet forces started to push German troops out of Russia, the armament factories were busy developing new military technology to counter the Panther and Tiger tanks and their various tank destroyer units. The ISU-152 series entered production in 1943 based on the KV-1 heavy tank chassis, armed with the ML-20 152.4mm gun howitzer. Despite these new variants being sent into combat, Soviet designers were immediately looking at new developments.
One of these experiments was the Object 704 which adopted the chassis features of the IS-2 and IS-3 tanks and was distinctive with its sloping armour and lower profile. Armed with the ML-20SM model 1944 gun-howitzer, with a barrel length of over 4.5 metres (29.6 calibers) and no muzzle brake, which further increased the firepower of the gun, the vehicle provided the best crew protection of all self-propelled guns in World War II. However, with a crew of five, a low ceiling in the fighting compartment, and the lack of muzzle brake, the workload was unbearable for the crew from the gun recoil. It had a maximum range of 13,000 metres. Only one prototype was built and it is on display in a Russian armour museum. The self-propelled gun carried 20 rounds of two piece (shell and charge) armour-piercing and high explosive ammunition. The secondary armament of the fighting vehicle consisted of two 12.7 x 108 mm DShK machine guns, one anti-aircraft and one co-axial.
The Object 704 self-propelled howitzer was designed to replace the ISU-152.
The overall height of the vehicle was reduced to 2240 mm, which was compensated with an increased width of the superstructure. The factory designation was Object 704. It was armed with the 152.4 mm ML-20SM
Product Information
Trumpeter's kit is moulded in grey styrene and presented on 15 sprues plus the upper and lower hull halves, 12 sprues are in a rust coloured styrene, it includes one turned aluminium barrel, and a few photo-etched parts. Contains of over 460 parts including the kit with refined detail, multi-slide moulded lower hull, 192 individual tracks links and photo-etched parts.
Item No: 05575
Item Name: Soviet Project 704 SPH
Scale: 1:35
Item Type: Static Kit
Model Brief Length: 244.5mm Width: 97.7mm
Total Parts: 460+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 27, lower hull and upper hull
Released Date: 2014-03
More Features:
The kit consists of over 460 partsIncludes refined detail
Multi-slide moulded lower hull
192 individual tracks links
Photo-etched parts included
Detailed suspension and road wheels
Individual track link assembly to replicate track sag
Nicely detailed DShK anti-aircraft gun
Detailed (massive) main gun mantlet with metal gun barrel
Main gun barrel is movable in azimuth and elevation
Photo-etched rifling insert for tip of gun barrel to replicate howitzer
Basic pioneering tools and external fuel drum storage provided
© 2024 Panzer Models. Prepared by Article.
