WWII
The Second World War (1939 - 1945)
1/35 scale WWII models and accessories - tanks, armoured vehicles, plastic and resin figures, paints, weathering products, painting guides, scenics, buildings and more.
Miniart 1:35 - US 101st Airborne Division (Normandy 1944)
Sold Out
Miniart 1:35 - US 101st Airborne Division (Normandy 1944) - Plastic Figure Model Kit #35089
The 101st Airborne Division nicknamed the "Screaming Eagles" is a light infantry division of the US Army specialised in air attacks. During WWII the Division took part in several allied military operations including the D-Day landings, Operation Market Garden and the Battle of the Bulge.
The initial part of Operation Overlord began on the night of June 6, 1944 with the parachute landings of the 101st Airborne Division in Normandy, known as Mission Albany. Almost 7,000 US paratroopers descended in the northwest of France, however, low visibility, bad weather conditions and German ground fire affected the landing accuracy. The troops were badly scattered over the area, so most of the mission objectives were not attained.
This kit represents three German soldiers captured by two American paratroopers from the 101st Airborne Division.
The kit contains 57 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - US Ammo-Loading Crew
Sold Out
Miniart 1:35 - US Ammo-Loading Crew - Plastic Figure Model Kit #35190
The kit represents five US tank crew members. Four tankmen are handling the shells, and the fifth is filling the tank with fuel from a canister. All soldiers are wearing standard US tank crew uniforms.
View instructions for this kit here
The kit contains 64 parts.
Includes parts for five figures and accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - US Military Police with Motorcycles
Sold Out
Miniart 1:35 - US Military Police with Motorcycles - Plastic Figure Model Kit #35085
This kit represents two American military policemen and two Harley-Davidson WLA motorcycles. During WWII, the main task of the US Military Police was supporting troop and military supplies convoys that required the high mobility of motorcycles. The Harley Davidson WLA was the most common bike used by the Americans in the European theatre. Over 90,000 units were produced at that time.
The kit contains 245 parts.
Includes parts for two motorcycles and two figures, photo etched parts and a sheet of decals.
Box: 290mm x 190mm x 45mm
Required paints:
- VAL950 Black
- VAL923 Khaki
- VAL843 Brown
- VAL864 Steel
- VAL817 Red
- VAL887 Olive Drab
- VAL997 Silver
- VAL815 Skintone
Miniart 1:35 - US Military Policeman with Motorcycle
Sold Out
Miniart 1:35 - US Military Policeman with Motorcycle - Plastic Figure Model Kit #35168
The kit represents one US Military policeman sitting atop a Harley Davidson WLA motorcycle. The scene is set during the Second World War. A Thomson machine gun scabbard, windscreen, kick stand and saddlebags are also provided.
The kit contains 117 parts.
Includes parts for one figure and one motorcycle.
Photo-etched parts and decals are included.
Box: 290mm x 190mm x 45mm
Decal option:
- Harley-Davidson WLA 1945, US Army (1775-Now), 82 Airborne Division MP-6, Olive drab
Miniart 1:35 - US Officers
Sold Out
Miniart 1:35 - US Officers - Plastic Figure Model Kit #35161
The kit contains 53 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - US Tank Crew (NW Europe)
Sold Out
Miniart 1:35 - US Tank Crew (Northwestern Europe) - Plastic Figure Model Kit #35070
The kit represents five American tank crew members from the Northwestern Europe Theatre of Operations during the Second World War. Each tankman is armed with a Colt 45 and equipped with a holster. Two standard steel helmets, three tank helmets and one cloth hat are included. Four figures are dressed in tan coveralls and the officer is wearing a jacket and a pair of trousers. Goggles and binoculars are provided.
The kit contains 58 parts.
Includes parts for five figures and accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - US Tractor D7 with Angled Dozer Blade
Sold Out
Miniart 1:35 - US Tractor D7 with Angled Dozer Blade - Plastic model kit #35184
The D7 was a medium bulldozer deployed by the US Army during WWII. It was produced by Caterpillar Inc., in 1938 and as such was also known as the Caterpillar D7.
During WWII, D7 tractors with blades were often used for earthworks. However, they also served for moving military equipment, when the blades were removed. There were four variants for the blades: a straight blade (S-blade), a universal blade (U-blade), an S-U combination blade and an angled blade. The angled blade was attached to the bulldozer C-frame and had three set positions: right angle, left angle, and centred.
The further development of the series was marked by the appearance of the D7D, D7E, D7F, D7G, D7H and D7R models. The latest version of the tractor was introduced in 2008. It was the D7E bulldozer improved with a 235 hp diesel engine.
The kit contains 856 parts.
Includes parts for one tractor, Photo Etched parts and decals. Glue and paint are not included.
Box: 385mm x 240mm x 70mm
Additional:
- Up-to-date technology with sliding moulds
- Highly detailed model
- Fully-detailed engine compartment and chassis
- Full-colour instructions
- Workable track links
Miniart 1:35 - WWII Drivers
Sold Out
Miniart 1:35 - WWII Drivers - Plastic Figure Model Kit #35042
The kit represents six drivers of WWII era: two Germans, two Soviets, one American and one British. A variety of figure positions (including a traditional sitting pose) makes the kit perfect for dioramas featuring all kinds of WWII vehicles. It can also be a great addition to a single finished model.
The kit contains 48 parts.
Includes parts for six figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 AEC Mk I Armoured Car
Sold Out
Miniart 1:35 - AEC Mk I Armoured Car - Plastic model kit #35152
The British AEC heavy armoured cars were built by the Associated Equipment Company (AEC) during WWII, with the first car produced in 1941. The AEC Mk I was equipped with the Valentine Mk II turret, featuring the 2-pounder gun. The Mk I had an AEC 195 diesel engine and weighed eleven tonnes. Over a hundred Mk I vehicles were built and many of them saw action in the North African Campaign.
The kit contains 496 parts.
Includes parts for one British armoured car.
Box: 345mm x 240mm x 80mm
- Highly detailed model
- 436 plastic parts
- 60 Photo-Etched metal parts
- Decal options for three vehicles
- Full-colour instruction
- New tooling: state of the art engineering utilising slide mould technology
- Fully detailed interior
- Highly detailed engine compartment
- Accurately represented engine, fighting compartment and driving compartment interior
- Driver’s vision periscopes moulded in clear plastic
- All doors and hatches can be assembled open or closed
- Slide-mould tyre tread pattern moulded in one part
Miniart 1:35 AEC Mk. III Armoured Car
£45.00 GBP
Miniart 1:35 - AEC Mk. III Armoured Car - Plastic Model Kit #35159
AEC Armoured Car was developed by AEC (Associated Equipment Company) as a private venture with an aim to obtain an order from the Army. When the vehicle was shown to officials at the Horse Guards Parade in London in 1941, it made an impression on Winston Churchill and it was decided to put the AEC Car into production. A total of 629 vehicles were produced until 1944, which included three variants - Mk. I, Mk. II and Mk. III.
No other WWII armoured car was armed and armoured as heavily as the AEC Armoured Car. The Mk. III version was equipped with a ROQF 75 mm (2.95 in) main gun, and its frontal armor was 65 mm thick. The vehicle's protection was superior to any other British armoured car at the time.
Most Mk. 3's were used in Western Europe, Northern France and the Low Countries. The AEC Armoured Car remained in service until 1958.
- Highly detailed model
- 537 plastic parts
- 52 photo-etched parts
- Decals are provided
- Full colour instruction
- Fully detailed interior
- Highly detailed engine compartment
- Engine is accurately represented
- Clear plastic parts for vision periscopes
- All doors and hatches can be assembled open or closed
The kit includes parts for one armoured car and one figure.
Box: 345mm x 240mm x 80mm
Markings:
- Royal Armoured Corps Gunnery School, Lulworth Camp, Dorset, UK, 1944
- Heavy Troop, D Squadron, 2nd Household Regiment, VIII Corps, Normandy, June 1944
- 1st King's Dragoon Guards, XII Corps, 2nd British Army, North-West Europe, spring 1945
Download instructions for this kit here
Miniart 1:35 Ardennes Building
Sold Out
Miniart 1:35 - Ardennes Building - Plastic model kit #35515
Ardennes is a region in southeast Belgium that extends into Luxembourg, Germany and France. The strategic position of the Ardennes has made it a battleground for European powers for centuries. The region's rugged terrain encompasses rolling valleys, meandering rivers, extensive caves and dense forests crisscrossed with hiking paths. In the 20th century, the Ardennes was widely thought unsuitable for large-scale military operations, due to its difficult terrain and narrow lines of communications. But, in both World War I and World War II, Germany successfully gambled on making a rapid passage through the Ardennes to attack a relatively lightly defended part of France. The Ardennes was the site of three major battles during the world wars – the Battle of the Ardennes in World War I, and the Battle of France and Battle of the Bulge in World War II. Many of the towns of the region were badly damaged during the two world wars.
The kit contains 143 parts.
Model Dimension: Length 251mm, Height 285mm, Width 148mm
Box: 345mm x 240mm x 70mm
Miniart 1:35 Austrian City Building
Sold Out
Miniart 1:35 - Austrian City Building - Plastic model kit #35013
The kit contains 127 parts.
Includes German decals and propaganda posters.
Model Dimension: Length 186mm, Height 308mm, Width 92mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 Battle of the Bulge, Ardennes 1944
Sold Out
Miniart 1:35 - Battle of the Bulge, Ardennes 1944 - Plastic Figure Model Kit #35084
The Battle of the Bulge (16 December 1944 – 25 January 1945) was a major German offensive campaign launched through the densely forested Ardennes region of Wallonia in Belgium, France, and Luxembourg on the Western Front toward the end of World War II in Europe.
The surprise attack caught the Allied forces completely off guard. The Germans attacked a weakly defended section of the Allied line, taking advantage of heavily overcast weather conditions, which grounded the Allies' overwhelmingly superior air forces. Fierce resistance on the northern shoulder of the offensive around Elsenborn Ridge and in the south around Bastogne blocked German access to key roads to the northwest and west that they counted on for success. Columns of armour and infantry that were supposed to advance along parallel routes found themselves on the same roads. This and terrain that favoured the defenders threw the German advance behind schedule and allowed the Allies to reinforce the thinly placed troops. Improved weather conditions permitted air attacks on German forces and supply lines, which sealed the failure of the offensive. In the wake of the defeat, many experienced German units were left severely depleted of men and equipment, as survivors retreated to the defenses of the Siegfried Line.
The Germans' initial attack included 406,000 men, 1,214 tanks, tank destroyers, and assault guns, and 4,224 artillery pieces. These were reinforced a couple weeks later, bringing the offensive's total strength to around 450,000 troops. Between 67,200 and 125,000 of their men were killed, missing or wounded. For the Americans, with 610,000 involved in the battle, of whom 89,000 were casualties, including up to 19,000 killed, it was the largest and bloodiest battle fought by the United States in World War II.
The kit contains 47 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 British Bantam 40 BRC w/Crew
Sold Out
Miniart 1:35 - British Bantam 40 BRC w/Crew - Plastic model kit #35324
At the outbreak of WWII, the American Army starting looking for a General Purpose Vehicle. The American Bantam Company came up with a design that passed rigorous testing, but they didn’t have the required capacity for the mass production. As the Government now owned the design, they contracted out the build to Willys Overland and Ford in 1941, and they came up with a slightly altered version in the form of the familiar Willys Jeep.
The American Bantam company did end up producing 2675 Bantam BRC- 40’s, but once the US Army standardised the production of the Ford and Willys version all the Bantams were either issued to Britain or Russia under the Lend Lease scheme. The British used the some of the limited number they received in the Desert Campaign in North Africa.
Includes parts for one vehicle and three figures.
Box: 290mm x 190mm x 45mm
Miniart 1:35 British Officers
Sold Out
Miniart 1:35 - British Officers - Plastic Figure Model Kit #35165
The kit contains 52 parts.
Includes parts for the assembly of five figures.
Box: 260mm x 162mm x 35m
Miniart 1:35 British Tank Mk. III Valentine V
Sold Out
Miniart 1:35 - British Tank Mk. III Valentine V - Plastic model kit #35106
The Mk. III Valentine was a British infantry tank produced during World War II. The tank had many variants, and over 8000 vehicles of this type were produced. There are several versions of why the tank was called "Valentine", most popular being that the design was presented to the War Office on the 14th of February.
Initially Vickers produced 10 tanks per month, rising to 45 per month, and peaking at 20 per week in 1943. Production of the Valentine and vehicles based on the Valentine stopped in 1945. A total of 2,515 vehicles were produced by Vickers-Armstrong, and 2,135 were manufactured by Metropolitan. The Mk. III Valentine was also built under licence in Canada, with 1,420 vehicles produced. Most of these tanks were sent to the Soviet Union.
The British Army used the Valentine in the North African Campaign. As for the Soviet service, the tank was used from the Battle of Moscow until the end of the war.
Includes parts for one tank and two figures.
Box: 345mm x 240mm x 80mm
Miniart 1:35 Budapest 1945 Diorama (SU-76, Building & Figures)
Sold Out
Miniart 1:35 - Budapest 1945 Diorama (SU-76, Building & Figures) - Plastic model kit #36007
The kit contains 816 parts.
Model Dimension: Length 290mm, Width 215mm
Box: 380mm x 280mm x 110mm
Miniart 1:35 Czech City Building
Sold Out
Miniart 1:35 - Czech City Building - Plastic model kit #35018
The kit contains 247 parts.
Includes Soviet wall slogans and signs 1944-45.
Model Dimension: Length 166mm, Height 316mm, Width 118mm
Box: 345mm x 240mm x 70mm
Miniart 1:35 Daimler Dingo Mk III w/Crew
Sold Out
Miniart 1:35 - Daimler Dingo British Scout Car Mk III w/Crew - Plastic Model Kit #35077
The Dingo was a British light two-man armoured car, relatively low and wide enough to have the required stability for fast off-road rides. Its initial armour was thin, just enough to stand against infantry ordnance. At the Army’s request, it was thickened, reaching 30mm (1.18 in) on the front nose and glacis. Deflecting armoured sloped panels were welded all around the central framework. The front driving compartment had four opening hatches. The engine was the regular Daimler 6-cyl 2.5 l 55 hp (41 kW), fed by a 300 l (79.25 gal) gasoline reserve (two tanks), which gave an incredible long range for its small size. The transmission consisted of a pre-selector gearbox, fluid flywheel, five forward gears and five reverse gears, allowing steering with all four wheels. This feature gave the Dingo a very tight turning radius, only 7m (23 ft), but the system was tricky to master for inexperienced drivers, so a more conventional design with front-wheel steering was chosen for the Mk.II.
During the course of wartime production, it appeared that the flat bottom plate, which allowed the crossing of uneven ground, was highly vulnerable to mines. The rubber tires were of the run-flat semi-solid type, so no spares were carried, but their toughness was compensated by the massive vertical coil springs, to give a smooth ride. There was a swiveling seat next to the driver, for a machine-gun servant/radio operator, equipped with a N°19 wireless radio set. The base armament was a removable cal. 0.303 (7.7 mm) Bren gun, with a dozen spare magazines. This armament could be swapped over for a heavier Boys antitank rifle (cal 0.55 in/14 mm). This gave the vehicle, which was fast and well-protected, with a good engine and low profile, a real advantage against all sorts of light vehicles, making it perfectly suited for reconnaissance and liaison missions.
The Dingo was produced from 1939 to 1945, and remained virtually unaltered.
The Mark I had a flexible sliding roof and the all-wheel steering. It was difficult to handle for inexperienced drivers.
The Mark IA was a sub-variant equipped with a folding roof.
The Mark IB had a reverse cooling air flow and new armored grilles for the radiator, allowing better ventilation. The bulk of these vehicles served in the Libyan desert.
The Mark II had a revised steering system, using only the front wheels. The lighting equipment was modernised, altogether with the Mark IB modification range.
The Mark III was the final version, coming in 1944 with a waterproof ignition system and no roof at all.
The kit contains 262 parts.
Includes parts for one armoured car and three figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Dingo MK IB British Armoured Car w/Crew
Sold Out
Miniart 1:35 - Dingo MK IB British Armoured Car w/Crew - Plastic Model Kit #35067
The Dingo was a British light two-man armoured car, relatively low and wide enough to have the required stability for fast off-road rides. Its initial armour was thin, just enough to stand against infantry ordnance. At the Army’s request, it was thickened, reaching 30mm (1.18 in) on the front nose and glacis. Deflecting armoured sloped panels were welded all around the central framework. The front driving compartment had four opening hatches. The engine was the regular Daimler 6-cyl 2.5 l 55 hp (41 kW), fed by a 300 l (79.25 gal) gasoline reserve (two tanks), which gave an incredibly long range for its small size. The transmission consisted of a pre-selector gearbox, fluid flywheel, five forward gears and five reverse gears, allowing steering with all four wheels. This feature gave the Dingo a very tight turning radius, only 7m (23 ft), but the system was tricky to master for inexperienced drivers, so a more conventional design with front-wheel steering was chosen.
During the course of wartime production, it appeared that the flat bottom plate, which allowed the crossing of uneven ground, was highly vulnerable to mines. The rubber tires were of the run-flat semi-solid type, so no spares were carried, but their toughness was compensated by the massive vertical coil springs, to give a smooth ride. There was a swiveling seat next to the driver, for a machine-gun servant/radio operator, equipped with a N°19 wireless radio set. The base armament was a removable cal. 0.303 (7.7 mm) Bren gun, with a dozen spare magazines. This armament could be swapped over for a heavier Boys antitank rifle (cal 0.55 in/14 mm). This gave the vehicle, which was fast and well-protected, with a good engine and low profile, a real advantage against all sorts of light vehicles, making it perfectly suited for reconnaissance and liaison missions.
The Dingo was produced from 1939 to 1945, and remained virtually unaltered. The Mark IB was the third variant of the series. It had a reverse cooling air flow and new armoured grilles for the radiator, allowing better ventilation. The bulk of these vehicles served in the Libyan desert.
This kit represents a British Dingo MK IB armoured car and three British crew-members: a driver, an observer and an officer. All three figures are dressed in British desert uniforms and armed with holstered revolvers. The officer has a pair of binoculars, a water bottle and a map case.
The kit contains 218 parts.
Includes parts for one armoured car and three figures.
Box: 345mm x 240mm x 60mm
Decals options:
- British Army, 7 Armoured Division, 1 Field Squadron Royal Engineers F 47483, World War II, Libya 1942, Sand with dark-earth stripes
- Canadian Army, 1 Canadian Army Tank Brigade, Calgary Reg Hunter, Operation Jubilee, Diepe, August 1942, Dark green, dark earth, black
- British Army, 7 Armoured Division, 4 Armoured Brigade, 5 Battalion F19370, World War II, Libya 1942, Sand
You can download instruction sheets here.
Miniart 1:35 Dingo Mk II Pz. Kpfw. Mk I 202 (e) w/Crew
£32.00 GBP
Miniart 1:35 - Dingo Mk II Pz. Kpfw. Mk I 202 (e) w/Crew - Plastic Model Kit #35074
The Dingo was a small two-man armoured car, relatively low and wide enough to have the required stability for fast off-road rides. Its initial armour was thin, just enough to stand against infantry ordnance. At the Army’s request, it was thickened, reaching 30mm (1.18 in) on the front nose and glacis. Deflecting armoured sloped panels were welded all around the central framework. The front driving compartment had four opening hatches. The engine was the regular Daimler 6-cyl 2.5 l 55 hp (41 kW), fed by a 300 l (79.25 gal) gasoline reserve (two tanks), which gave an incredible long range for its small size. The transmission consisted of a pre-selector gearbox, fluid flywheel, five forward gears and five reverse gears, allowing steering with all four wheels. This feature gave the Dingo a very tight turning radius, only 7m (23 ft), but the system was tricky to master for inexperienced drivers, so a more conventional design with front-wheel steering was chosen for the Mk.II.
During the course of wartime production, it appeared that the flat bottom plate, which allowed the crossing of uneven ground, was highly vulnerable to mines. The rubber tires were of the run-flat semi-solid type, so no spares were carried, but their toughness was compensated by the massive vertical coil springs, to give a smooth ride. There was a swiveling seat next to the driver, for a machine-gun servant/radio operator, equipped with a N°19 wireless radio set. The base armament was a removable cal. 0.303 (7.7 mm) Bren gun, with a dozen spare magazines. This armament could be swapped over for a heavier Boys antitank rifle (cal 0.55 in/14 mm). This gave the vehicle, which was fast and well-protected, with a good engine and low profile, a real advantage against all sorts of light vehicles, making it perfectly suited for reconnaissance and liaison missions.
The Dingo was produced from 1939 to 1945, and remained virtually unaltered.
The Mark I had a flexible sliding roof and the all-wheel steering. It was difficult to handle for inexperienced drivers.
The Mark IA was a sub-variant equipped with a folding roof.
The Mark IB had a reverse cooling air flow and new armored grilles for the radiator, allowing better ventilation. The bulk of these vehicles served in the Libyan desert.
The Mark II had a revised steering system, using only the front wheels. The lighting equipment was modernised, altogether with the Mark IB modification range.
The Mark III was the final version, coming in 1944 with a waterproof ignition system and no roof at all.
The kit contains 262 parts.
Includes parts for one armoured car and two figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Diorama w/Ruined Buildings
Sold Out
Miniart 1:35 - Diorama w/Ruined Buildings - Plastic model kit #36036
This kits contains 97 parts.
Model Dimension: Length 223mm, Width 173mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 European Street Diorama
Sold Out
Miniart 1:35 - European Street Diorama - Plastic model kit #36011
The kit contains 138 parts.
Model Dimension: Length 300mm, Width 215mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 European Tiled Roof
Sold Out
Miniart 1:35 - European Tiled Roof - Plastic model kit #35555
The kit contains 63 parts.
Model Dimension: Length 250mm, Width 252mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 Factory Corner w/steps
Sold Out
Miniart 1:35 - Factory Corner w/steps - Plastic model kit #35544
The kit contains 190 parts.
Model Dimension: Length 240mm, Height 265mm, Width 180mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 French Cafe
Sold Out
Miniart 1:35 - French Cafe - Plastic model kit #35513
The kit contains 125 parts.
Model Dimension: Length 147mm, Height 205mm, Width 95mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 French Tank Crew
£11.00 GBP
Miniart 1:35 - French Tank Crew - Plastic Figure Model Kit #35105
The kit contains 45 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 French Village House
Sold Out
Miniart 1:35 - French Village House - Plastic model kit #35510
The kit contains 158 parts.
Includes commercial posters.
Model Dimension: Length 250mm, Height 200mm, Width 180mm
Box: 345mm x 240mm x 90mm
Miniart 1:35 German Armoured Car Crew WWII
£10.00 GBP
Miniart 1:35 - German Armoured Car Crew WWII - Plastic Figure Model Kit #35072
The kit contains 49 parts for the assembly of five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Artillery Tractor T-70 & 7.62cm Gun FK288 w/Crew
£43.00 GBP
Miniart 1:35 - German Artillery Tractor T-70 & 7.62cm Gun FK288 w/Crew - Plastic model kit #35039
Using captured or foreign produced equipment was a standard practise of the German Army since before the war, and the T-70 was no exception. The German designation for the T-70 was " Pz. Kpfw. T-70 743(r) " and was used mainly for reconnaissance and 'Internal Police Duties'. Some T-70's were used as ammunition, supply, or artillery tractors.
Ex-soviet 7.62cm FK288(r) (ZIS-3) guns were used by the 2., 3., 4., and 6. Batteries of the 16. Luftwaffenfelddivision (air force field division).
The kit contains 584 parts.
Includes parts for artillery tractor, limber, gun, five figures, and 42 photoetched parts.
Paints Required:
VAL950 - Black
VAL815 - Skintone
VAL920 - Grey Green
VAL894 - Field Green
VAL846 - Rust
VAL863 - Gun Metal
VAL825 - Brown
VAL998 - Bronze
VAL864 - Steel
VAL999 - Copper
VAL913 - Wood
VAL975 - Dark Green
Miniart 1:35 German City Building
Sold Out
Miniart 1:35 - German City Building - Plastic model kit #35506
The kit contains 143 parts.
Model Dimension: Length 200mm, Height 256mm, Width 105mm
Box: 345mm x 240mm x 70mm
Miniart 1:35 German Field Gun FK39 (r) 7.62cm
Sold Out
Miniart 1:35 - German Field Gun FK39 (r) 7.62cm - Plastic model kit #35104
The German FK39 (r) was formerly a Russian piece, designed to replace the aging 76mm M1902/30 series and formally adopted by the Red Army in 1939. The initial production covered the bare requirements of the Red Army, but when the Operation Barbarossa started Soviet factories had to begin production in much greater numbers. Those Soviet guns that fell into German hands were turned against their former owner and were designated the 7.62cm FK39(r). The Germans modified the gun to use Pak 36 (r) ammunition.
Includes parts for one gun, four ammo boxes with shells, and photo etched parts.
Box: 290mm x 190mm x 45mm
Miniart 1:35 German Grenades & Mines Set
Sold Out
Miniart 1:35 - German Grenades & Mines Set - Plastic Model Kit #35258
This kit includes German grenades and mines with ammo boxes and Molotov cocktails in a wooden box.
The kit contains 125 parts:
- 113 plastic parts
- 40 clear parts
- 12 PE parts
Decal sheet included.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Infantry Weapons and Equipment
£13.75 GBP
Miniart 1:35 - German Infantry Weapons and Equipment - Plastic Model Kit #35247
This kit includes parts for German infantry weapons and equipment.
Contents:
Arms: Walther G41 Semi-automatic rifle, Rifle 98k, Kar 98k Sniper Rifle w/Zf4 Scope, Selective-fire Automatic Rifle FG 42, MP 44 Assault Rifle, Submachinegun ERMA (EMP), Bergmann MP 34, Maschinenpistole MP 28, Maschinenpistole MP 40, Browning HP 35, Astra 600/43, Walther P 38, Luger P 08, Flare Pistol, Bayonet and Scabbard, Bayonet
Accessories: Binoculars, Case for binoculars, Browning holster, Astra holster, Walther holster, Walther holster opened, Luger holster, Flare pistol pigskin case, Flare pistol holster, Canteen and cup, Bread pouch (bag), Gas mask container, Map case, Cooking pot model 31, Cartridge belt, Cartridge belt Model 33 for Kar 98k, Cartridge belt for FG 42, Magazine pouches for MP 44, Cartridge belt for ERMA, Cartridge belt for MP 34, Cartridge belt for MP 28, Cartridge belt for MP 40, First-aid kit, Foldable spade, Shovel (Entrenching tool)
Other: 1/35 scale German maps, 1/35 scale German magazines
Kit details:
- 179 parts
- 114 plastic parts
- 65 photo-etched parts
- Decals included
- Box: 260mm x 162mm x 35mm
Download instructions with a full list of content here
Miniart 1:35 German Jagdpanzer SU-76(r) w/Crew
Sold Out
Miniart 1:35 - German Jagdpanzer SU-76(r) w/Crew - Plastic model kit #35053
It was common for the German army to use captured vehicles in battle. The SU-76 was a Soviet self-propelled gun used during and after World War II. Its German designation was Jagdpanzer SU-76. The SU-76 was based on a lengthened and widened version of the T-70 light tank chassis. Its simple construction made it the second most produced Soviet armoured vehicle of World War II, after the T-34 tank.
The SU-76M virtually replaced infantry tanks in the close support role. Its thin armour and open top made it vulnerable to antitank weapons, grenades, and small arms. Its light weight and low ground pressure gave it good mobility.
The kit contains 588 parts.
Includes parts for one tank and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 German Machine Gun Set
Sold Out
Miniart 1:35 - German Machine Gun Set - Plastic model kit #35250
This kit contains parts for building two MG-34 machine guns with bi-pods, two MG-42 machine guns with bi-pods and one German ZB-53 machine gun on a tripod. Several types of ammunition boxes and drums are included as well as a case for an additional MG-42 barrel.
The kit contains 84 parts and 38 photo-etched parts.Includes parts for the assembly of two MG-34, two MG-42 and one ZB-53 machine guns as well as accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Pz. Kpfw T-70 743 (r) w/Crew
Sold Out
Miniart 1:35 - German Pz. Kpfw T-70 743 (r) w/Crew - Plastic model kit #35026
Using captured or foreign produced equipment was a standard practise of the German Army since before the war, and the T-70 was no exception. The German designation for the T-70M was " Pz. Kpfw. T-70 743(r) " and was used mainly for reconnaissance and 'Internal Police Duties'. Some T-70's had their turrets removed, and were used to tow Artillery.
The kit contains 348 parts.
Includes parts for one vehicle and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 German Staff Car 170V
£35.00 GBP
Miniart 1:35 - German Staff Car, Mercedes-Benz 170V - Plastic Model Kit #35103
The Mercedes-Benz W136 was Mercedes-Benz's line of inline-four cylinder automobiles from the mid-1930s into the 1950s. The model 170V made its public debut in February 1936. Between 1936 and 1939 it was Mercedes' top selling model. Between 1936 and 1942 over 75,000 were built.
The "V" in the 170 V's was an abbreviation of "Vorn" (front), added to differentiate it from the contemporary rear-engined Mercedes-Benz 170H (W28) ("H" for "Heck", rear) which used the same four cylinder 1697cc engine, but positioned at the back of the car.
Most of the cars produced were two or four door "Limousine" (saloon/sedan bodied cars), but the range of different body types offered in the 1930s for the 170V was unusually broad. A four-door "Cabrio-Limousine" combined the four doors of the four door "Limousine" with a full length foldaway canvas roof.
There was a two door two seater "Cabriolet A" and a two door four seater "Cabriolet B" both with luggage storage behind the seats and beneath the storage location of the hood when folded (but without any external lid for accessing the luggage from outside the car). A common feature of the 170V bodies was external storage of the spare wheel on the car's rear panel.
The kit contains 269 parts.
Includes parts for one German car.
Box: 345mm x 240mm x 60mm
Miniart 1:35 German Tank Crew - Afrika Korps
Sold Out
Miniart 1:35 - German Tank Crew, Afrika Korps - Plastic Figure Model Kit #35141
The German Afrika Korps (Deutsches Afrikakorps) was formed in 1941 with the purpose of assisting Italy in defending its African colonies. The Afrika Korps fought in Africa from 1941 until May 1943 when it surrendered along with other remaining Axis forces in North Africa.
This kit contains parts for the assembly of five German tank crew members. All figures are shirtless and wear tropical DAK shorts. Three of them have a tropical pith helmet on, and the other two - the early war type field side cap.
The kit contains 35 parts.
Box: 260 x 162 x 35 mm
Miniart 1:35 German Tank Crew At Rest
£11.00 GBP
Miniart 1:35 - German Tank Crew At Rest - Plastic Figure Model Kit #35198
The kit contains 58 parts.
Box: 260 x 162 x 35mm
Includes parts for five figures and a pig. Paint and glue are not included.
Miniart 1:35 German tank crew at work
Sold Out
Miniart 1:35 - German tank crew at work - Plastic Figure Model Kit #35010
A typical German tank crew consisted of a commander, a tank driver, gunners and loaders depending on the series of the tank. The total number of crew members also varied from one tank model to another.
The kit contains 40 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Tank Crew Winter, Special Edition
£14.00 GBP
Miniart 1:35 - German Tank Crew Winter, Special Edition - Plastic Figure Model Kit #35249
This kit contains parts for the assembly of five WWII German tank crew members in winter uniforms. Weapons and accessories are provided.
View instructions and full contents of this kit here
The kit contains 80 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German tank repair crew Special Edition
Sold Out
Miniart 1:35 - German tank repair crew Special Edition - Plastic Figure Model Kit #35319
The kit contains 36 parts.
Includes parts for five figures and work tools.
Box: 260mm x 162mm x 35m
Miniart 1:35 Italy 1943 Diorama
Sold Out
Miniart 1:35 - Italy 1943 Diorama - Plastic model kit #36008
Allied operations in and around Italy, from 1943 to the end of the war in Europe, are known as the Italian Campaign. Joint Allied Force Headquarters (AFHQ) was operationally responsible for all Allied land forces in the Mediterranean theatre, and it planned and commanded the invasion of Sicily in July 1943, followed shortly thereafter in September by the invasion of the Italian mainland and the campaign on Italian soil until the surrender of the German Armed Forces in Italy in May 1945. It is estimated that between September 1943 and April 1945, some 60,000-70,000 Allied and 150,000 German soldiers died in Italy. Overall Allied casualties during the campaign totaled about 320,000 and the corresponding German figure (excluding those involved in the final surrender) was well over 600,000.
The kit contains 81 parts.
Model Dimension: Length 247mm, Width 172mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 Leichter Pz.Kpfw. 202(e) with Crew Dingo Mk.I
£32.00 GBP
Miniart 1:35 - Leichter Pz.Kpfw. 202(e) with Crew Dingo Mk.I (Afrika Korps) - Plastic model kit #35082
The Daimler Mk. I, or the 'Dingo', was a British four wheel drive scout car often captured by the Nazis during WWII and renamed Leichter Pz.Kpfw. Mk. I 202(e).
Designed by Birmingham Small Arms Company, the Dingo was produced by Daimler in 1939. It had two man crew and was used as a reconnaissance vehicle. Its key advantages included the special gearbox, which allowed five speeds in both directions, and a four-wheel steering system, which gave a turning circle of 7 m. The Dingo first saw action with British troops in the Battle of France. It remained in British service till 1952 with over 6,000 units produced by that time.
The kit contains 204 parts.
Includes parts for the assembly of one armoured car and three figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Lithuanian City Building
Sold Out
Miniart 1:35 - Lithuanian City Building - Plastic model kit #35504
The kit contains 242 parts.
Includes German and Soviet posters.
Model Dimension: Length 280mm, Height 285mm, Width 130mm
Box: 345mm x 240mm x 80mm
Miniart 1:35 Panzerfaust 30/60 Set
£17.00 GBP
Miniart 1:35 - Panzerfaust 30/60 Set - Plastic Model Kit #35253
The Panzerfaust was a single shot German anti-tank weapon used from 1943 until the end of WWII. The Panzerfaust 30 weighed over 5 kg and had a total length of 1.045 metres. The warhead contained 0.8 kg of the mixture of TNT (trinitrotoluene) and hexogen explosives in the proportion of 1:1. The warhead was fitted on the launch tube that contained black powder propellant. The tube was discarded after firing which made the Panzerfaust the first disposable anti-tank weapon. The Panzerfaust 60 weighed 6.8 kg and its projectile speed was 45 m/s compared to 30 m/s of the Panzerfaust 30. Effective range of the Panzerfaust 60 was also increased from 30 to 60 m compared to that of the Panzerfaust 30.
This kit includes:
- 16 x Panzerfaust 30 with 4 boxes
- 16 x Panzerfaust 60 with 4 boxes
- Photo-etched parts
- Decals
The kit contains 192 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Panzerschreck RPzB.54 & Ofenrohr RPzB.43 Set
Sold Out
Miniart 1:35 - Panzerschreck RPzB.54 & Ofenrohr RPzB.43 Set - Plastic Model Kit #35263
The Panzerschreck (tank's bane) was the common name for the Raketenpanzerbüchse (abbreviated to RPzB), an 88 mm calibre reusable anti-tank rocket launcher developed by Nazi Germany in World War II. Another popular nickname was Ofenrohr ("stove pipe").
The Panzerschreck was designed as a lightweight man portable anti-tank weapon and was largely a replica of the US military bazooka. The weapon was shoulder-launched and fired a fin-stabilized rocket with a shaped-charge warhead. It was made in smaller numbers than the Panzerfaust, which was a disposable recoilless gun firing an anti-tank warhead.
Download instructions here.
This kit includes:
- Panzerschreck RPzB.54
- Ofenrohr RPzB.43
- Ammo boxes, backpacks and projectiles
- Photo-etched parts
- Decals
Box: 260mm x 162mm x 35mm
© 2025 Panzer Models. Prepared by Article.
