WWII
The Second World War (1939 - 1945)
1/35 scale WWII models and accessories - tanks, armoured vehicles, plastic and resin figures, paints, weathering products, painting guides, scenics, buildings and more.
Miniart 1:35 Personenwagen Typ 170V Saloon (Special Edition)
£35.00 GBP
Miniart 1:35 - Personenwagen Typ 170V Saloon (Special Edition) - Plastic model kit #35203
The Mercedes-Benz W136 was Mercedes-Benz's line of inline-four cylinder automobiles from the mid-1930s into the 1950s. The model 170V made its public debut in February 1936. Between 1936 and 1939 it was Mercedes' top selling model. Between 1936 and 1942 over 75,000 were built. Most of the cars produced were two or four door "Limousine" (saloon/sedan bodied cars).
The "V" in the 170 V's was an abbreviation of "Vorn" (front), added to differentiate it from the contemporary rear-engined Mercedes-Benz 170H (W28) ("H" for "Heck", rear) which used the same four cylinder 1697cc engine, but positioned at the back of the car.
The kit contains 267 parts.
Includes parts for the assembly of one vehicle and one figure.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Ruined Garage
Sold Out
Miniart 1:35 - Ruined Garage - Plastic model kit #35511
The kit contains 75 parts.
Model Dimension: Length 265mm, Height 180mm, Width 184mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 Scout Car Dingo Mk IA w/Crew
£32.00 GBP
Miniart 1:35 - Scout Car Dingo Mk IA w/Crew - Plastic Model Kit #35087
The Dingo was a British light two-man armoured car, relatively low and wide enough to have the required stability for fast off-road rides. Its initial armour was thin, just enough to stand against infantry ordnance. At the Army’s request, it was thickened, reaching 30mm (1.18 in) on the front nose and glacis. Deflecting armoured sloped panels were welded all around the central framework. The front driving compartment had four opening hatches. The engine was the regular Daimler 6-cyl 2.5 l 55 hp (41 kW), fed by a 300 l (79.25 gal) gasoline reserve (two tanks), which gave an incredible long range for its small size. The transmission consisted of a pre-selector gearbox, fluid flywheel, five forward gears and five reverse gears, allowing steering with all four wheels. This feature gave the Dingo a very tight turning radius, only 7m (23 ft), but the system was tricky to master for inexperienced drivers, so a more conventional design with front-wheel steering was chosen for the Mk.II.
During the course of wartime production, it appeared that the flat bottom plate, which allowed the crossing of uneven ground, was highly vulnerable to mines. The rubber tires were of the run-flat semi-solid type, so no spares were carried, but their toughness was compensated by the massive vertical coil springs, to give a smooth ride. There was a swiveling seat next to the driver, for a machine-gun servant/radio operator, equipped with a N°19 wireless radio set. The base armament was a removable cal. 0.303 (7.7 mm) Bren gun, with a dozen spare magazines. This armament could be swapped over for a heavier Boys antitank rifle (cal 0.55 in/14 mm). This gave the vehicle, which was fast and well-protected, with a good engine and low profile, a real advantage against all sorts of light vehicles, making it perfectly suited for reconnaissance and liaison missions.
The Dingo was produced from 1939 to 1945, and remained virtually unaltered.
The Mark I had a flexible sliding roof and the all-wheel steering. It was difficult to handle for inexperienced drivers.
The Mark IA was a sub-variant equipped with a folding roof.
The Mark IB had a reverse cooling air flow and new armored grilles for the radiator, allowing better ventilation. The bulk of these vehicles served in the Libyan desert.
The Mark II had a revised steering system, using only the front wheels. The lighting equipment was modernised, altogether with the Mark IB modification range.
The Mark III was the final version, coming in 1944 with a waterproof ignition system and no roof at all.
The kit contains 303 parts.
Includes parts for one armoured car and two figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Sevastopol Diorama
Sold Out
Miniart 1:35 - Sevastopol Diorama - Plastic model kit #36005
The kit contains 131 parts. Includes parts for diorama base, ruined building and 5 figures.
Model Dimension: Length 205mm, Width 135mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 Soviet 100mm Shells w/Ammo Boxes
Sold Out
Miniart 1:35 - Soviet 100mm Shells w/Ammo Boxes - Plastic Model Kit #35088
The kit contains 108 parts.
Includes parts for six ammo boxes.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet 122mm Ammunition
Sold Out
Miniart 1:35 - Soviet 122mm Ammunition - Plastic Model Kit #35068
The kit contains 120 parts.
Includes parts for six ammo boxes.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet 45mm Shells w/Ammo Boxes
Sold Out
Miniart 1:35 - Soviet 45mm Shells w/Ammo Boxes - Plastic Model Kit #35073
The kit contains 156 parts.
Includes parts for six ammo boxes.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet Artillery Crew on Maneuvere
£20.00 GBP
Miniart 1:35 - Soviet Artillery Crew on Maneuvere - Plastic Figure Model Kit #35081
The Soviet anti-tank gun ZiS-3, also known as the 76-mm divisional gun M1942, was constructed at the Artillery Factory No. 92 in 1940 for the needs of the Red Army suffering enormous losses at the beginning of the Second World War. The gun was developed by V.G. Grabin, a Soviet artillery designer. The ZiS-3 design was based on the F-22USV cannon and the ZiS-2 anti-tank gun. Combining the F-22USV barrel and the ZiS-2 carriage, the ZiS-3 turned out to be far more effective compared to its prototypes. Unlike the F-22USV, the ZiS-3 was equipped with a muzzle brake which allowed to reduce recoil. Besides, its production was a lot easier and cheaper because most parts were manufactured by means of casting, and it was allowed to use materials lower in quality.
During the war, when fast production and large quantities were the highest priority, the ZiS-3 took part in combat without having been put to the tests. However, in the battlefield it proved its superiority over other anti-tank guns and later it was recognised by the authorities and obtained its official name - the divisional field gun model 1942. Due to its high combat effectiveness, the ZiS-3 had the largest share in the field gun production at wartime.
The kit contains 221 parts.
Includes parts for five figures and one anti-tank gun ZiS-3.
Box: 290mm x 190mm x 45mm
Miniart 1:35 Soviet Field Kitchen w/Horses
£32.00 GBP
Miniart 1:35 - Soviet Field Kitchen w/Horses - Plastic Figure Model Kit #35057
The kit contains 240 parts.
Includes parts for two horses, one field kitchen and one soldier.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Soviet GAZ-AA Cargo Truck
£34.00 GBP
Miniart 1:35 - Soviet GAZ-AA Cargo Truck - Plastic model kit #35124
A truck from Ford, Ford Model AA, was produced from 1927 till 1932. The vehicle was powered by a 3.3L I4 engine which produced a maximum of 40 horsepower at 2,200 rpm. It was designed to replace the T and TT models. The truck was available in a variety of body styles.
Ford licensed the production of the Model AA to several countries, including the Soviet Union. From 1932 to 1950 the USSR manufactured over 985,000 AA's, designated the GAZ AA. The cargo capacity of the Soviet model was 1,500 kg. Another version of this truck with a stronger 50HP engine is often called GAZ–MM, after the engine.
Includes parts for one cargo truck and two figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Soviet Gun ZIS-3 w/Horses
£38.00 GBP
Miniart 1:35 - Soviet Gun ZIS-3 w/Horses - Plastic model kit #35045
The ZiS-3 was a Soviet 76.2mm divisional field gun used during the Second World War. ZiS stood for "Zavod imeni Stalina" ("Factory named after Stalin"), the honorific title of Artillery Factory No. 92, which first constructed the gun.
When the ZiS-3 was first demonstrated to the Soviet authorities, Stalin called this gun "a masterpiece of artillery systems design". The Soviet Union produced over 103,000 ZiS-3 guns.
The kit contains 401 parts.
Includes parts for four horses, limber, gun and seven figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Soviet infantry at rest
£8.00 GBP
Miniart 1:35 - Soviet infantry at rest - Plastic Figure Model Kit #35001
The kit contains 42 parts.
Includes parts for four figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet Infantry Weapons and Equipment Special Edition
£14.00 GBP
Miniart 1:35 - Soviet Infantry Weapons and Equipment Special Edition - Plastic Model Kit #35304
The kit contains 86 parts.
Includes parts for Soviet infantry weapons and equipment.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet Machine Guns and Equipment
Sold Out
Miniart 1:35 - Soviet Machine Guns and Equipment - Plastic model kit #35255
The set represents a selection of Soviet machine guns used before, during and after the Second World War as well as additional equipment and ammunition boxes.
Includes:
1 x DShK 12.7mm Heavy Machine gun
1 x 7.62mm Maxim 1910/30 Machine Gun (with two-wheeled trolley and photo-etch gun shield)
1 x 7.62mm Maxim 1940 Machine Gun (with two-wheeled trolley and photo-etch gun shield)
1 x 14.5mm PTRD-41 Anti-Tank Rifle
1 x 7.62mm DP Light Machine Gun
1 x 7.62mm DT Tank Machine Gun
2 x Maxim MG Ammo belts with cartridges
2 x Maxim MG Ammo belts without cartridges
2 x Maxim Ammo Boxes with open lip
4 x Maxim Ammo Boxes closed
3 x PTRD 14.5mm cartridges
4 x DP27 Magazine Boxes
1 x DP27 Canvas Pouch
4 x 7.62x54R Ammo Boxes
1 x Cartridge Bag
The kit contains 159 parts and a fret of photo-etched parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet Naval Troops (Special Edition)
£11.00 GBP
Miniart 1:35 - Soviet Naval Troops (Special Edition) - Plastic Figure Model Kit #35094
Building a Soviet fleet was a national priority, but many senior officers were killed in purges in the late 1930s. When Germany invaded in 1941 and captured millions of soldiers, many sailors and naval guns were detached to reinforce the Red Army; these reassigned naval forces had especially significant roles on land in the battles for Odessa, Sevastopol, Stalingrad, Novorossiysk, Tuapse, and Leningrad. The Baltic fleet was blockaded in Leningrad and Kronstadt by minefields, but the submarines escaped. The surface fleet fought with the anti-aircraft defence of the city and bombarded German positions.
Through Lend-Lease, the U.S. and Britain gave the USSR ships with a total displacement of 810,000 tons. The composition of the Soviet fleets in 1941 included 3 aged battleships, 7 cruisers, 59 destroyer-leaders and squadron-destroyers, 218 submarines, 269 torpedo boats, 22 patrol vessels, 88 minesweepers, 77 submarine-hunters, and a range of other smaller vessels.
During the war, many of the vessels on the slips in Leningrad and Nikolayev were destroyed (mainly by aircraft and mines), but the Soviet Navy received captured Romanian destroyers and Lend-Lease small craft from the U.S., as well as the old Royal Navy battleship HMS Royal Sovereign (renamed Arkhangelsk) and the United States Navy cruiser USS Milwaukee (renamed Murmansk) in exchange for the Soviet part of the captured Italian navy.
From the beginning of hostilities, Soviet Naval Aviation provided air support to naval and land operations involving the Soviet Navy. This service was responsible for the operation of shore-based floatplanes, long-range flying boats, catapult-launched and vessel-based planes, and land-based aircraft designated for naval use.
The kit contains 154 parts.
Includes parts for five figures, weapons and equipment.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet officers at field briefing Special Edition
£14.00 GBP
Miniart 1:35 - Soviet officers at field briefing - Plastic Figure Model Kit #35365
The kit contains 49 parts.
Includes parts for five Soviet officers.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Soviet Soldiers at Rest (Special Edition)
Sold Out
Miniart 1:35 - Soviet Soldiers at Rest (Special Edition) - Plastic Figure Model Kit #35109
The kit contains 134 parts.
Includes parts for five figures, weapons and equipment.
Box: 260mm x 162mm x 35m
Miniart 1:35 Soviet T-70 M & ZiS-3 w/Crew
Sold Out
Miniart 1:35 - Soviet T-70 M & ZiS-3 w/Crew - Plastic model kit #35056
The Soviet T-70 was a light tank used during the Second World War. It was intended to replace two other tanks: the T-60 scout tank and the T-50 light infantry tank. The T-70 had a 45mm L/46 gun Model 38 and a coaxial 7.62mm DT machine gun. The maximum armour thickness was 60mm (on the turret front). The first tanks produced had a serious problem with the arrangement of engines, and were soon redesigned as the T-70M tanks, although they continued to be referred to as T-70. The production started in 1942 and ended in 1943, with 8,226 vehicles completed. The tank remained in service until 1948.
The ZiS-3 was a Soviet 76.2mm divisional field gun used during the Second World War. ZiS stood for "Zavod imeni Stalina" ("Factory named after Stalin"), the honorific title of the factory which first constructed this gun. When the ZiS-3 was first demonstrated to the Soviet authorities, Stalin called it "a masterpiece of artillery systems design". The Soviet Union produced over 103,000 ZiS-3 guns.
The kit contains 470 parts.
Includes parts for tank with gun and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 SU-122 (Early Production)
£43.00 GBP
Miniart 1:35 - SU-122 (Early Production) - Plastic Model Kit #35181
The SU-122 was a Soviet WWII assault gun with a 122mm M-30S howitzer as its main armament. The production of the SU-122 started in 1942 with 27 vehicles built during the first month. By 1944, the Soviet Union produced over a thousand SU-122's. After 1944 the SU-122 was replaced by the SU-152, ISU-122 and ISU-152 heavy SPGs and SU-85 tank destroyers.
The kit contains 565 parts for the Soviet SPG SU-122.
Box: 385mm x 240mm x 70mm
Miniart 1:35 SU-122 (Initial Production) With Full Interior
£50.00 GBP
Miniart 1:35 - SU-122 (Initial Production) With Full Interior - Plastic Model Kit #35175
The SU-122 was a Soviet WWII self-propelled howitzer or assault gun with a 122mm M-30S howitzer as its main armament. The production of the SU-122 started in 1942 with 27 vehicles built during the first month. By 1944, the Soviet Union produced over a thousand SU-122's. After 1944 the SU-122 was replaced by the SU-152, ISU-122 and ISU-152 heavy SPGs and SU-85 tank destroyers.
The kit contains 828 parts for the Soviet SPG SU-122.
Miniart 1:35 SU-85 Mod. 1943 (Mid Prod) With Full Interior
£50.00 GBP
Miniart 1:35 - SU-85 Mod. 1943 (Mid Production) With Full Interior - Plastic Model Kit #35187
The SU-85 was a Soviet self-propelled anti-tank gun produced in mid-1943 for fighting against the new and more advanced German Tiger and Panther tanks featuring armour too thick to be penetrated by the older Soviet tanks such as the T-34 and KV-1. The number "85" stands for the bore of its armament, 85 mm D-5S gun, which was modified from the 85 mm anti-aircraft gun by Fyodor Petrov and was strong enough to penetrate the Tiger I from 1000 m. The advantages of the SU-85 also included excellent mobility and a standard commander's cupola that ensured good visibility. Though successfully used in combat until the end of the war, the SU-85 was replaced by the SU-100 which proved to be more effective.
The kit contains 805 parts.
Box: 385mm x 240mm x 90mm
Miniart 1:35 SU-85 Mod. 1944 Early with Interior
£50.00 GBP
Miniart 1:35 - SU-85 Mod. 1944 (Early Production) with Interior - Plastic Model Kit #35204
The SU-85 was a Soviet self-propelled anti-tank gun produced in mid-1943 for fighting against the new and more advanced German Tiger and Panther tanks. The newer German armour was too thick to be penetrated by the older Soviet tanks such as the T-34 and KV-1. The number "85" stands for the bore of its armament, 85 mm D-5S gun, which was modified from the 85 mm anti-aircraft gun by Fyodor Petrov and was strong enough to penetrate the Tiger I from 1000 m. The advantages of the SU-85 also included excellent mobility and a standard commander's cupola that ensured good visibility. Though successfully used in combat until the end of the war, the SU-85 was replaced by the SU-100 which proved to be more effective.
The kit contains 934 parts.
Box: 385mm x 240mm x 90mm
Additional:
- The interior of the fighting compartment is fully detailed
- The engine compartment is fully detailed
- The V-2-34 engine included
- Full interior of transmission compartment
- Workable track links
- Three types of wheels
- 95 Photo-Etched parts
- 10 clear plastic parts
- Decals sheet included
Miniart 1:35 U.S. Motorcycle Repair Crew
£32.00 GBP
Miniart 1:35 - U.S. Motorcycle Repair Crew - Plastic Model Kit #35284
The kit contains 216 parts.
Includes parts for two motorcycles and three figures.
Miniart 1:35 U.S. Soldier Pushing Motorcycle
Sold Out
Miniart 1:35 - U.S. Soldier Pushing Motorcycle - Plastic Figure Model Kit #35182
The Harley-Davidson WLA was produced for the U.S. Army during and around World War II. The design was based on the existing civilian model - the WL ("A" in "WLA" stands for "Army"). Harley-Davidson began the production of the WLA in 1940, and the later entry of the U.S. into the war significantly increased production volumes. Over 90,000 WLA's were built during the WWII. A similar WLA variant was produced for the Canadian Army, and smaller numbers were supplied to the UK, South Africa, and other allies.
The kit contains 127 parts.
Includes parts for the assembly of a motorcycle and one figure.
Box: 290mm x 190mm x 45m
Miniart 1:35 Ukrainian City Building
Sold Out
Miniart 1:35 - Ukrainian City Building - Plastic model kit #35006
The kit contains 122 parts.
Includes Soviet decals and propaganda posters.
Model Dimension: Length 250mm, Height 198mm, Width 197mm
Box: 345mm x 240mm x 70mm
Miniart 1:35 USV-BR 76mm Gun Mod.1941 with Limber and Crew
£35.00 GBP
Miniart 1:35 - USV-BR 76mm Gun Mod.1941 with Limber and Crew - Plastic model kit #35129
The USV was a Soviet 76 mm cannon issued in 1939 for the demands of the Red Army. The gun was classified as "divisional" because it was specifically meant for batteries under the direct command of division headquarters. Based on the previous F-22 design, the USV gun was also called the F-22 USV.
By 1940 over a thousand units were ready, and in 1941 when the plan for divisional guns was fulfilled, the production stopped, however not for long. With the German invasion of the Soviet Union the production was reopened at the Barrikady factory in Stalingrad and No. 92 Plant in Nizhny Novgorod. The relaunched model was designated the USV-BR. It was widely deployed in 1941, the first year of the Great Patriotic War. Over eight thousand units were built in the following two years, but by the end of 1942 the USV-BR was completely replaced by the simpler and cheaper ZiS-3.
The kit contains 329 parts.
Includes parts for a Soviet USV-BR gun with a 52-R-353M limber (Mod. 1942), five figures and six ammunition boxes with shells.
Box: 345mm x 240mm x 70mm
Additional:
- 31 photo etched parts
- Highly detailed model
- Decals included
- The limber can be assembeled as a horse drawn limber or a vehicle towed one
- A slide moulded barrel
- Ability to elevate the gun and show recoil
- The slot in the shield can be open or closed
- The gun can be assembled in action or in a towed state
The ammunition boxes include:
- 12 armour-piercing shells
- 12 high-explosive shells
- 12 fragmentation shells
- 6 used cartridges for high-explosive shells
- 6 used cartridges for armour-piercing shells
Miniart 1:35 Village House w/ Base
Sold Out
Miniart 1:35 - Village House w/ Base - Plastic model kit #36031
The kit contains 119 parts.
Model Dimension: Length 257mm, Width 225mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 ZIS-3 Gun Emplacement
Sold Out
Miniart 1:35 - ZIS-3 Gun Emplacement - Plastic model kit #36058
The 76-mm divisional gun M1942 (ZiS-3) was a Soviet 76.2 mm divisional field gun used during World War II. ZiS was a factory designation and stood for Zavod imeni Stalina ("factory named after Stalin"), the honorific title of Artillery Factory No. 92, which first constructed this gun.
The design works of ZiS-3 started in the end of 1940 on the Artillery Factory No. 92 under supervision of V. G. Grabin. There was no order for this work; moreover, at that time the attitude toward such development programs on the part of artillery commanders, such as Marshal Kulik, the head officer of Soviet artillery, was extremely negative. So the project was run purely on the initiative of Grabin, his design bureau and the Artillery Factory No. 92 head and his deputies. None of them informed state authorities about the ZiS-3 project.
After having been built, the first ZiS-3 gun was hidden from the watchful eyes of the authorities, who continued to ignore the Red Army's need for light and medium field guns. The authorities' main argument was the information that German heavy tanks carried exceptionally strong armour. In reality Germany did not have such tanks in early 1941 and this misinformation was the result of successful Nazi propaganda about the Neubaufahrzeug multi-turreted prototype tank.
When ZiS-3 guns were finally transferred to the Red Army under personal responsibility of Grabin and Artillery Factory No. 92 head staff, the combat experience showed the superiority of ZiS-3 over all other types of divisional level field guns. This allowed the ZiS-3 to be presented to a group of state authorities headed by Joseph Stalin and thus obtain all needed approval. After the demonstration was over Stalin said: "This gun is a masterpiece of artillery systems design." The total number of ZiS-3s produced exceeded 103,000 pieces.
The kit contains 151 parts.
Includes: models of ZIS-3, six ammo boxes w/shells and gun crew set.
Model Dimension: Length 267mm, Width 217mm
Box: 345mm x 240mm x 60mm
Revell 1:35 Armoured Scout Vehicle P204 (f)
Sold Out
Revell 1:35 - Armoured Scout Vehicle P204 (f) - Plastic Model Kit #03259
The Panhard 178 or "Pan-Pan" was a French four-cylinder armoured car designed for the French Cavalry in 1932 and aimed to function as a long-range scout vehicle. It had room for four crew members and was fitted with 25 mm armament and 7.5 mm machine gun.
As a reconnaissance car, the Panhard 178 was rather small, only 4.8 m long and 2.3 m high. Despite its weight of over 8 tonnes, the vehicle was still able to reach speeds of over 70 km/h. However, its off-road speed was limited to 42 km/h.
At the outbreak of the Second World War a number of Panhards were captured by German troops and renamed Panzerspähwagen P204 (f). In 1941 at least 190 units were manufactured for use in Operation Barbarossa.
The Panhard 178 design was considered advanced for its time and remained modern long after the war. It was the first four-cylinder armoured car mass-produced in France.
Total parts: 158
Skill Level: 4
Release date: 01/2017
Includes:
- Rotating turret with detailed interior
- Representation of the driving position and engine
- Rubber tyres
- Authentic decal set for following versions: Wehrmacht, Operation Barbarossa, Eastern Front, Russia, 1941-1942 and Wehrmacht, Anti-Partisan Role, France, 1944
Revell 1:35 German Sd.Kfz.167 StuG IV
Sold Out
Revell 1:35 - German Sd.Kfz.167 StuG IV - Plastic Model Kit #03255
The Sturmgeschütz IV, shortened to StuG IV or Sd.Kfz.167, was a German assault gun designed on the basis of the Panzer IV in the last years of the Second World War. The main role of the StuG IV on the battlefield was the same anti-tank role of its predecessor the StuG III. The use of StuG IV guns was a considerable support to the weakening German forces on both fronts.
The StuG IV was practically identical to its predecessor, however it was a bit lighter, which in view of the limited resources was a great advantage. Its armament consisted of a 7.5cm StuK 40 L / 48 assault cannon and 7.92mm MG 34 machine gun. In the period between December 1943 and May 1945 over a thousand of StuG IVs were built. The gun was proved effective against both Soviet and Allied tanks.
Kit details:
- Total parts: 293
- Skill Level: 4
- Length: 191mm
- Easy to assemble
- Elevating cannon
- Removable side skirts
- One figure included
Decal options:
- 17th Panzer Grenadier Division 'Götz von Berlichingen', Normandy (France), June 1944
- Unknown Unit, Operation Bagration, Russia, July 1944
Revell 1:35 German Staff Car Type 82E
Sold Out
Revell 1:35 - German Staff Car Type 82E - Plastic Model Kit #03247
The German Staff Car Type 82, also known as Volkswagen Kübelwagen, was a light combat vehicle developed by Ferdinand Porsche and produced by Volkswagen during World War II for the needs of the German armed forces.
The first prototype designed in 1938 was designated Type 62. Due to its light weight and strong off-road characteristics, the vehicle was approved for further development. In 1939 first pre-production models were put to the test during the invasion of Poland. In general, the vehicle performed well on the battlefield, however some changes were required. The improvements concerned the lowest speed - it was reduced from 8 km/h to 4 km/h. The new version was named Type 82.
The Type 82 extensive production started in 1940 and lasted till the end of the war. A few modified models appeared during that period including Type 82E. It had the traditional Volkswagen Beetle body instead of the box-shaped standard one. Also, the Type 82E was powered with the air-cooled flat 4-cylinder engine.
By the end of the production in 1945, over 50 thousand Kübelwagen vehicles were built. Type 82 is considered one of the most useful and dependable vehicles of WWII.
Total parts: 66
Skill Level: 4
Length: 112mm
Includes:
- A single-piece body
- Fully detailed interior
- Three sets of decals
Revell 1:35 LCM3 50ft Landing Craft & Jeep
Sold Out
Revell 1:35 - LCM3 50ft Landing Craft & Jeep - Plastic Model Kit #03000
June 6, 1944, best known as "D-Day", was one of the crucial days of the Second World War, the day when the Allied troops landed on the beaches of Normandy. At the landing light vehicles and some other cargos were carried ashore from the LCM3 50ft landing crafts which had been widely used by British and American naval forces since 1942. Cargo capacity of those crafts was up to 30 tonnes. As for the vehicles, the most common cars employed during the war were all-wheel-drive jeeps. Those jeeps were often brought ashore from landing crafts to the coast by the soldiers for the purpose of transportation.
Includes: LCM-3, jeep, 6 figures, movable bow ramp, detailed stand, true-to-original reproduction of propelling screw, two movable MG mounts, numerous accessories such as fuel drums and life buoys, two sets of decals.
Total parts: 291
Skill Level: 5 (Very Challenging)
Length: 435mm
Paints required
Main: 36109, 36135, 36136, 36145, 36146, 36156, 36178, 36186
Optional: 36105, 36176, 36106, 36186, 36154, 36189, 36157, 36382, 36130, 36191, 36183, 36179, 36188
Revell 1:35 Sd.Kfz. 184 Tank Hunter "Elefant"
Sold Out
Revell 1:35 - Sd.Kfz. 184 Tank Hunter "Elefant" - Plastic Model Kit #03254
The Elefant was a heavy tank destroyer produced by the Porsche car company in 1943. The initial version was named "Ferdinand" after its designer Ferdinand Porsche.
The Ferdinand was modified after its debut in the Battle of Kursk during which a number of flaws were revealed. The improvements mainly concerned the construction of the tank and its armament. The vehicle was supplemented with a commander's cupola and a layer of front armour. Also, it was additionally armed with a MG 34 machine gun and covered with Zimmerit. The advanced model was renamed "Elefant". Officially it was known as Panzerjäger Tiger (P) or Sd.Kfz. 184.
Today one of these vehicles is on show at the Kubinka Tank Museum in Russia, and another belongs to the United States Army Ordnance Museum. These two tanks are the only samples of the series that survived the war.
Total parts: 238
Skill Level: 4
Appearance date: 01/2017
Includes:
- Easy-to-assemble vinyl tracks
- Elevating gun
- Turret hatches can be mounted in the open or closed position
- Kit contains three figures
- Authentic decal set for following versions:
1st Company of the 653rd Heavy Panzerjäger Battalion, Soriano al Cimino, Italy, 27/06/1944
2nd/3rd Company of the 653rd Heavy Panzerjäger Battalion, Eastern Front, Russia/Poland, 1944
Revell 1:35 Tiger II Ausf. B (Henschel Turret)
£27.00 GBP
Revell 1:35 - Tiger II Ausf. B (Henschel Turret) - Plastic Model Kit #03249
Tiger II was a German heavy tank of the Second World War officially designated the Panzerkampfwagen Tiger Ausf. B. Based on the Tiger I, the Tiger II combined the thick armour of its predecessor and the armour slope of the Panther medium tank. The maximum thickness of its front armour was 185 mm and the weight reached 70 tonnes. The armament consisted of the long barrelled 8.8 cm KwK 43 L/71 gun which proved to be efficient against all Allied tanks.
The initial design of the Tiger II was developed in 1937 by the Henschel company. It featured a hull with sloped armour, a rear-mounted engine and overlapping steel-tired road wheels, 80 cm in diameter. Another design was developed by Porsche in 1939, but it was declined due to large production costs.
The Tiger II first saw combat during the Battle of Normandy in 1944. On the Eastern Front it was first used by the 501st Heavy Panzer Battalion. Fortunately for the Allies, German plants suffered great losses because of the Allied bombing, so a relatively small number of Tiger II's were built. Mass production ran from 1944 to the end of the war and only 492 units were produced during that period.
Kit details:
- Total parts: 250
- Skill Level: 4
- Length: 293mm
- Chassis with torsion bar suspension and easy to mount tracks
- Rotating turret and elevating gun
- Hatches that can be mounted open or closed
- Two sets of decals
Riich Models 1:35 - East meet West (Elbe River, 1945)
Sold Out
Riich Models 1:35 East meet West - Elbe River, 1945 - Plastic Figure Model Kit #RV35014
This figure set includes parts for the assembly of four figures. Two Soviet soldiers, a man and a woman, meet their American counterparts at the Elbe River in 1945. This kit can be an excellent addition to a diorama or an individual display piece.
Soviet Sniper WW2 1/16th scale
£45.00 GBP
Highly detailed 1/16th or 120mm scale miniature, capturing the uniform and equipment of a WW2 Soviet Sniper. The kit comes with three head configuration options, fur hat with ear flaps known as the 'Ushanka', a head with helmet (2 parts) and a head with a cap known as the 'Pilotka'.
This is ideal for a diorama or bust depicting Soviet Snipers such as Vasily Grigoryevich Zaitsev. Between 10 October 1942 and 17 December 1942, during the Battle of Stalingrad, he killed 225 enemy soldiers. Zaitsev became a celebrated figure during the war and later a Hero of the Soviet Union, and he remains lauded for his skills as a sniper.
Takom 1:35 Hanomag SS-100 German Tractor
Sold Out
Takom 1:35 - Hanomag SS-100 German Tractor - Plastic model kit #02068
Originally named SP-100, the Hanomag heavy tractor was first produced in 1936 as an agricultural vehicle. At the outbreak of WWII it quickly entered Wehrmacht and Luftwaffe service and remained in use till 1945. The military version was designated SS-100. Powered by a 8550 cc 6-cylinder D85 diesel engine, the SS-100 had room for five passengers and a driver and could carry additional equipment attached to its rear frame. It was often used to tow the Meillerwagen trailer in order to transport V-2 rockets to the launching point and erect them onto the firing stand. The Hanomag SS-100 was one of the most popular heavy tractors in the German military during the war.
Additional:
- Steerable front wheels
- Full interior parts included
- All doors can be build in opened or closed position
- Four types of markings
Tamiya 1:35 - DAK German Afrika Korps Limited Edition
Sold Out
Tamiya 1:35 - DAK German Afrika Korps Limited Edition - Plastic Figure Model Set #35037
This set includes eight German Africa Korps figures in various poses (marching x 2, running x 4, crouched x 2). Also includes numerous sidearms and accessories.
Tamiya 1:35 - German Afrika Korps Infantry
Sold Out
Tamiya 1:35 - German Afrika Korps Infantry - Plastic Figure Model Set #35314
This set contains 5 figures depicting infantrymen from Field Marshal Rommel's vaunted Afrika Korps, including an officer, an NCO, a rifleman in firing position, a machine gunner, and a loader. Each can be assembled in a realistic pose and all feature superb details such as open-collared jackets, goggles, and long canvas boots.
The Afrika Korps uniform was basically the same as the one for Europe, but featured open collars and a specific armband on the right sleeve. The Olive Green cotton shirt and trousers faded into various shades in the desert sun. Leather was not suited for the dry conditions, so canvas belts and boots were worn. This uniform was easy to produce and influenced the design of European Theater uniforms from mid-WWII onwards.
Tamiya 1:35 - German Heavy Tank Destroyer Elefant
Sold Out
This is a 1/35 scale plastic model assembly kit of the German Heavy Tank Destroyer Elefant.
Length: 236mm, Width: 97mm
The imposing form of the Elefant, including its 8.8cm gun and large fighting compartment, has been accurately reproduced based on a thorough study of an actual museum example. One-piece fighting compartment is made via slide moulding technique. The main gun, engine grilles, and detailed suspension are designed to ensure easy assembly. The tracks feature one-piece straight sections with realistic sag effect.
Kit comes with commander, loader, and driver torso figures. 3 marking options included to depict vehicles deployed to the Italian and Eastern fronts.
The German heavy tank destroyer Elefant was armed with a powerful 8.8cm L/71 gun which could knock out T-34 tanks at a distance of 2,000m, protected by armour up to 200mm thick, and equipped with advanced features such as a hybrid drivetrain. It had its roots in the Porsche-designed Ferdinand, which was first deployed into combat during the Battle of Kursk in 1943. The lessons learned from that battle resulted in modifications including the addition of a commander's cupola, a machine gun for infantry defence, and better tracks and the enhanced vehicle received the new designation Elefant in February 1944. Elefants were deployed to Italy and the Eastern Front, where they continued to defend against Allied forces until the final skirmishes of the war.
Tamiya 1:35 - German Panther Type G Tank Steel Wheel
Sold Out
The German Panther tank was produced from 1943 until the end of WWII and deployed on the Eastern and Western Fronts in Europe. The tank was developed as a replacement for the Panzer III and Panzer IV tanks and was intended to counter the Soviet T-34. The Panther had a powerful 700hp Maybach engine and a turret placed far back on the hull mounting a 75mm L/70 cannon. The Panther's excellent firepower and protection made it one of the best tanks of World War II. The Panther was easier to produce and maintain than the Tiger I, but it is often considered to be as effective as the latter. The Ausf.G included versions with heater unit installed over the left engine fan, and with lower lip piece added to the mantlet to eliminate shot trap.
- Highly detailed static model kit
- Two-part plastic hull with turret
- Authentic 75mm gun
- Detailed flexible tracks
- Parts for making the steel-wheel version
- Anti-aircraft machine gun
- Infrared night viewer
- Extra track links and spikes to mount on the sides of the turret and tank
- Detailed suspension
- Plastic soldier figurine included
- Waterslide decals included
- Detailed instructions
Tamiya 1:35 - German Schwimmwagen Type 166
Sold Out
The Schwimmwagen Type 166 was an amphibious four-wheel drive off-roader produced by Volkswagen and extensively used by German ground forces during WWII. The Type 166 was made smaller than its prototypes in order to improve the vehicle's efficiency, and had a wheel-base of only 200 cm. From 1941 to 1944, over 15,500 Type 166 Schwimmwagen cars were produced, which made the VW 166 the most mass-produced amphibious car in history.
The kit includes parts for the assembly of one vehicle with a driver. Certain accessories pictured are not included.
Tamiya 1:35 - T26E4 Super Pershing
Sold Out
Tamiya 1:35 - U.S. Tank T26E4 Super Pershing - Plastic Model Set #35319
The M26 Pershing was the first American tank capable of taking on the German Army's Tiger I and Panther tanks. The tank was introduced during the final stages of the Second World War. The T26E4 was a development of the M26 armed with a more powerful, long-barreled 90mm main gun. This gun was superior to the one found on the King Tiger heavy tank and could penetrate the Panther's frontal armour from long distances. The first T26E4 was sent to the European front in 1945. Subsequent models featured various improvements such as a modified gun mount.
- Model Dimensions: Length: 293mm, Width: 101mm
- Accurately reproduced turret with long-barreled 90mm gun and bustle counterweight;
- Parts for the larger gun travel lock included;
- Movable suspension enables many possibilities for dioramas;
- Accessories such as machine gun ammunition cases included;
- Comes with 3 infantry figures, 2 crew torso figures, and 1 marking option.
Tamiya 1:35 - WWII German Soldiers Special Collection No.2
Sold Out
Tamiya 1:35 - WWII German Soldiers Special Collection No.2 - Plastic Figure Model Set #89781
This is a special packaging of thirteen of Tamiya's popular figure sets.
Includes:
TAM35038 German Machine Gun Troops
TAM35061 German Panzer Grenadiers
TAM35180 German Tank Engine Maintenance Crew Set
TAM35053 Wehrmacht Mounted Infantry Set
TAM35074 Tent Set
TAM35111 German Infantry Weapons Set
TAM35193 German Infantry Mortar Team
TAM35201 German Tank Crew At Rest
TAM35253 German Panzer Division "Frontline Reconnaissance Team"
TAM35035 German 37mm Anti-Tank Gun PAK 35/36
TAM35247 German Field Kitchen Scenery
Operation "Barbarossa", June 22, 1941 (ICM figure parts)
German Patrol (1939-1942) (ICM figure parts)
Trumpeter 1:35 20mm Flakvierling 38 auf Selbstfahrlafette
Sold Out
Trumpeter 1:35 - German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version) - Plastic model kit #01524
The Flak 38 was a German 20mm anti-aircraft gun used throughout WWII which became the most numerously produced German artillery piece of the period. The 20mm Flakvierling 38 auf Selbstfahrlafette (Sd. Kfz. 7/1) was the result of combining the 20mm Flakvierling 38 with four Flak 38 guns and the Sd. Kfz. 7 half-track, to provide greater mobility and firepower. The Sd. Kfz. 7/1 carried 600 2cm rounds on board and 1800 rounds in the towed Sd. Ah. 56 trailer. The guns had the 360 degrees traverse by hand and could be elevated from -10 to +100 degrees. The later versions also included an armoured cab for better protection of the crews. A crew of 10 included a gun commander, eight gunners and a driver.
The first 100 vehicles were produced in 1940-1941 and production continued at a rate of 10 vehicles per month until August 1942, when the monthly rate was significantly increased. Around 800 vehicles were produced by December 1944. From 1942, most vehicles were fitted with lightly armoured driver cabs and a plate to protect the engine compartment. The armour was 8mm thick. These vehicles were issued to Flak units of the Luftwaffe and Panzer units of the German Army. Sd. Kfz. 7/1 units were used to protect armoured units against low flying aircraft but were also successfully used against ground targets.
The kit represents a late version of the Sd.Kfz.7/1 with a 20mm Flakvierling 38. Early versions featured the central circular pivot mounting for the 20mm Flakvierling 38. Later versions had a normal ground mounting fitted to the rear bed which allowed the gun to be easily removed and mounted on the standard Flakvierling Sd. Ah. 52 trailer if necessary.
Item No: 01524
Item Name: German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version)
Scale: 1:35
Item Type: Static Armour
Model Dimensions: Length 312.5mm, Width 69mm, Height 107mm
Total Parts: 859 pcs
Metal Parts: Brass wire
Photo Etched parts: 5 frets
Total Sprues: 20 pcs sprues, 3 rubber tyres and an armoured cab
Paint Schemes: Markings are provided for vehicles in dark yellow with red brown and green camouflage scheme
Release date: 2009-07
Additional:
- New tooled slide-moulded one-piece late type KM m11 mudguard
- Side panels and the top panel of the engine hood can be opened
Trumpeter 1:35 BS-3 Soviet 100mm Anti-tank Gun M1944
£35.00 GBP
Trumpeter 1:35 - BS-3 Soviet 100mm Anti-tank Gun M1944 - Plastic model kit #02331
The BS-3 was based on a B-34 naval gun. The development team was led by V. G. Grabin. The gun was employed by light artillery brigades of tank armies (20 pieces along with 48 ZiS-3) and by corps artillery. In the Second World War the BS-3 was successfully used as a powerful anti-tank gun. It was capable of defeating any contemporary tank at long range, excluding the Tiger Ausf B: to destroy that heavy tank the gun needed to shoot at less than 1600m from the target. The gun was also used as a field gun. Though in this role it was less powerful than the 122 mm A-19, as it fired a smaller round, the BS-3 was more mobile and had a higher rate of fire.
Item No: 02331
Item Name: Soviet 100mm Anti-tank Gun M1944 (BS-3)
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 256.7mm, Width 59mm
Total Parts: 210+
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 7 sprues and tires
Release Date: 2014-01
Additional:
- The kit consists of over 210 parts
- Details are finely represented by newly tooled parts
- Rubber tires
Trumpeter 1:35 German Anti-aircraft Gun, 3.7cm Flak 43
£18.00 GBP
Trumpeter 1:35 - German Anti-aircraft Gun, 3.7cm Flak 43 - Plastic model kit #02311
The 3.7cm Flak 18/36/37/43 was a series of anti-aircraft cannon produced by Nazi Germany that saw widespread service in the Second World War. The 3.7cm Flak 43 was a dramatic improvement over older models. A new gas-operated breech increased the practical firing rate to 150 RPM, while at the same time dropping in weight to 1,250 kg (2,760 lb) in combat, and 2,000 kg (4,400 lb) in transport. It was also produced in a twin-gun mount, the 3.7cm Flakzwilling 43, although this version was considered somewhat unwieldy and top-heavy. The barrel remained basically the same as that of the Flak 18, 36 and 37. Changes in manufacture speed meant that only 1000 man hours were needed to manufacture the cannon, compared to the previous 4320 man hours.
Item No: 02311
Item Name: FLAK 43
Scale: 1:35
Item Type: Static Armour
Model Brief: Length 110mm, Width 70.8mm
Total Parts: 139 pcs
Metal Parts: n/a
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 5 sprues
Paint Schemes: German Army
Release Date: 2009-12
Additional:
- The kit consists of 139 parts
- Details are finely represented by newly tooled parts
Trumpeter 1:35 German E-75 (75-100 tons) Standardpanzer
£33.00 GBP
Trumpeter 1:35 - German E-75 (75-100 tons) Standardpanzer - Plastic model kit #01538
The German Entwicklung, or E-series tank designs were intended to replace the existing tanks such as the Jagdpanzer 38(t), Panther Ausf.G and Tiger II. The E-series vehicles were meant to be much simpler and cheaper to produce than their predecessors.
The E-75 Standardpanzer - standard heavy tank - was designed to replace the Tiger II and Jagdtiger. 75 stood for the intended weight of the vehicle - 75 tonnes. The E-75 was to use the Maybach HL 234 engine and due to its heavy weight the vehicle's maximum speed would be around 40 km/h.
The E-75 Standardpanzer shared many components with the E-50 which was intended to replace the Panther and Tiger I. The two vehicles were meant to have the same turret and the 8.8 cm KwK 43 L/71 gun.
Item No: 01538
Item Name: German E-75 (75-100 tons)/Standardpanzer
Scale: 1:35
Item Type: Static Armour
Model Dimensions: Length 351mm, Width 109.5mm
Total Parts: 294pcs
Metal Parts: brass wire
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 5 sprues, lower hull, upper hull, turret and tracks
Paint Schemes: Wehrmacht
Release Date: 2010-01
Additional:
- The kit consists of 291 parts in light grey plastic and 3 clear parts
- Refined detail
© 2025 Panzer Models. Prepared by Article.
