Axis Forces (WWII)
The Rome–Berlin–Tokyo Axis powers
On September 27, 1940, Germany, Italy, and Japan signed the Tripartite Pact, which became known as the Axis alliance. We stock 1/35 scale vehicles and figures from the Axis powers during WWII including kits from Academy, Master Box, MiniArt, HobbyBoss, Tamiya, Dragon and more.
Miniart 1:35 - German Artillery Crew (Special Edition)
Sold Out
Miniart 1:35 - German Artillery Crew (Special Edition) - Plastic Figure Model Kit #35192
The kit represents five members of a German artillery crew. This can be a great addition to a diorama featuring the German Field Gun FK39 (r) 7.62cm.
The kit contains 188 parts.
Includes parts for five figures and four ammunition boxes with shells.
Box: 260mm x 162mm x 35mm
The ammunition includes:
- 8 x 76mm UOF 354M HE-Fragmentation shells
- 8 x 76mm UBR-354P with the armour-piercing sub-calibre projectile BR-240P
- 8 x Solid Shot UBR-271K with 57mm AP-T shells
- 8 x used cartridges for the shells
Miniart 1:35 - German artillery crew riders
Sold Out
Miniart 1:35 - German artillery crew riders - Plastic Figure Model Kit #35040
The kit represents four German artillery crew and a driver, all seated in relaxed poses and clothed in standard German Grey-Green uniforms. The driver's position fits any artillery vehicle as well as a tank or armoured car which makes it possible to use the kit in various settings.
The kit contains 63 parts.
Includes parts for five figures, painting instructions and a paint conversion chart.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Civilians
Sold Out
Miniart 1:35 - German Civilians - Plastic Figure Model Kit #38015
The kit includes five German civilians of WWII (a young woman in a plaid coat, an older woman with a cane, a middle-aged man wearing a suit and one Hitlerjugend boy) as well as one Nazi policeman from the Ordnungspolizei (Order Police). The figure of the old woman is based upon a photo of a real German woman. The photo was published in several books and magazines dedicated to World War II. The figures can be used in a variety of dioramas depicting life in Western Europe during wartime.
The kit contains 47 parts.
Includes parts for five figures.
Box: 290mm x 190mm x 45mm
Miniart 1:35 - German Feldgendarmerie Special Edition
£12.00 GBP
Miniart 1:35 - German Feldgendarmerie Special Edition - Plastic Figure Model Kit #35315
The Feldgendarmerie were military police units formed in the Napoleonic era by the armies of several German kingdoms - Saxony, Württemberg, Prussian and Bavaria - which later became parts of the German Empire. In peacetime the units served with the Prussian Gendarmerie as a mounted police.
Dissolved after the First World War, the Feldgendarmerie were reintroduced in 1933 when Hitler seized power. Personnel were trained in a special military school in Potsdam. Due to strict training conditions and high demands placed on the candidates, only a small number of soldiers managed to graduate and join the force.
Staying behind the theatre of operations during WWII, the Feldgendarmerie closely worked with the Geheime Feldpolizei (Secret Field Police) and SS in the rear. Their duties were to monitor traffic and population control, fight with partisans as well as arrest and execute rebellions. According to some historians, the Feldgendarmerie soldiers were also involved in war crimes and Jewish purges in occupied territories.
In the period between 1943 and 1945 the Feldgendarmerie were infamously known for chasing and executing deserters, many of which were wrongfully convicted. This gave the units a bad name "Kettenhunde" or "Chained Dogs" after the gorget they wore with their uniforms.
The kit contains 71 parts.
Includes parts for five figures, equipment and road signs.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Paratroopers and Tankers (Italy 1943)
Sold Out
Miniart 1:35 - German Paratroopers and Tankers (Italy 1943) - Plastic Figure Model Kit #35163
Started in 1943 by the Allied forces, the Italian Campaign was aimed to take Italy out of WWII and seize its territory. The Italian Army was defeated by the Allies in 1945 with the collapse of the Axis Powers. Allied losses in the campaign were estimated at over 300,000 lives while German casualities were over 600,000 men.
The kit represents two German paratroopers and three tankers, all wearing hot climate uniforms.
The kit contains 51 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Passenger Car Type 170V 4 Doors
£35.00 GBP
Miniart 1:35 - German Passenger Car Type 170V 4 Doors - Plastic Figure Model Kit #38008
The Type 170V belonged to the Mercedes-Benz family of four cylinder automobiles produced from the mid-1930's into the 1950's. The car was issued in February 1936 and a few years later it became Mercedes' top selling model. Between 1936 and 1942 over 75,000 units were built. Most of the cars produced were two or four door "Limousine" (saloon/sedan bodied cars).
The kit contains 265 parts.
Includes parts for a car with a figure. Photo Etched parts and decals are included.
Box: 345mm x 240mm x 60mm
Miniart 1:35 - German Soldiers (Winter 1941-42)
Sold Out
Miniart 1:35 - German Soldiers (Winter 1941-42) - Plastic Figure Model Kit #35218
The first winter encountered by Nazi forces during the invasion of the Soviet Union was severely cold. The Wehrmacht troops were poorly prepared to spend that period in Russia. The kit represents five exhausted German soldiers trying to warm themselves up by the fire.
The kit contains 45 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Soldiers at Rest Special Edition
£13.00 GBP
Miniart 1:35 - German Soldiers at Rest - Plastic Figure Model Kit #35378
After the end of the First World War, the military forces of Germany called Reichswehr were limited to 100,000 soldiers under the terms of the Treaty of Versailles. In 1935, the Nazi army was renamed the Wehrmacht which allowed the Third Reich to increase its military strength. The branches of the Wehrmacht were the Heer (army), the Kriegsmarine (navy) and the Luftwaffe (air force). On the Wehrmacht recruitment posters the "ideal German soldier" was depicted as a blond and blue-eyed young man. Werner Goldberg, a German soldier, became the prototype of that image, however later he was "dismissed" after he had been found out to be half-Jewish. It is believed that the total number of soldiers who were recruited for service in the Wehrmacht during its existence from 1935 to 1945 constituted 18.2 million.
The kit contains 47 parts.
Includes parts for five figures: one Nazi officer and four German soldiers. Plus a water pump, barrels, chair, jug, wash tub, pot on bricks and shaving accessories
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Soldiers at Work
Sold Out
Miniart 1:35 - German Soldiers at Work - Plastic Figure Model Kit #35065
The kit contains 49 parts.
Includes parts for five figures and a set of tools.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Tank Crew ( Kharkov 1943 ) Resin Heads
£18.00 GBP
Miniart 1:35 - German Tank Crew ( Kharkov 1943 ) - Plastic Model Kit #35354
On the 19th of February 1943, the II SS Panzer Corps and two panzer armies under the command of Field Marshal Erich von Manstein launched their counterstrike on the Eastern Front, aimed to recapture Kharkov and Belgorod. With extensive air support from Luftflotte 4, in two weeks the German Army defeated the Red Army south of Kharkov and was able to directly engage the city on the 11th of March. After four days of house-to-house fighting, Kharkov was recaptured by the 1st SS Panzer Division on March the 15th. This series of battles is known as the Third Battle of Kharkov, which cost the Red Army over 80,000 casualties. Bevin Alexander, a military historian, called the Third Battle of Kharkov "the last great victory of German arms in the Eastern Front".
This kit contains models of five figures: Miniart 1:35 - German Tank Crew ( Kharkov 1943 ) - Plastic Model Kit plus Weapons and Equipment - Includes Resin Heads
Miniart 1:35 - German Tank Crew, France 1940
Sold Out
Miniart 1:35 - German Tank Crew, France 1940 - Plastic Figure Model Kit #35191
The German invasion of France in 1940 consisted of two main operations - Fall Gelb and Fall Rot. Carried out in May and June 1940, these operations allowed German forces to push deep into France and occupy Paris by 14 June.
This kit represents five German tankmen in early war uniforms during the invasion of France.
You can download instructions for this kit here
The kit contains 38 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Italian Tank Crew
£30.00 GBP
Miniart 1:35 - Italian Tank Crew - Plastic Figure Model Kit #35093
Italian tank crews wore blue overalls, black leather tanker’s helmets with neck guards, and black leather overcoats. The hot climate uniform was similar to the regular one, but made of a light khaki drill. Italian officers were dressed in black lather jackets with lapels. The distinguishing feature of officer's uniform was a five-pointed star in one of the lapels. Italian troops also wore side caps know as "Bustinas" ("Bustina" is an Italian word for "side cap"). The caps were of the standard Italian Grey-Green colour.
This kit features five Italian tank crew members including a tank officer. Goggles, holsters and other figures' equipment are included.
The kit contains 63 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Japanese Tank Crew
£11.00 GBP
Miniart 1:35 - Japanese Tank Crew - Plastic Figure Model Kit #35128
This kit consists of five Imperial Japanese tankmen, four crew members and a tank officer. All the figures are dressed in summer uniform with Gunte gloves ("Gunte" is Japanese for "army gloves"). One figure is wrapped in a Hinomaru Yosegaki, a patriotic flag that was traditionally gifted to Japanese soldiers to bring good luck in war. Each tankman carries a holster for a Type 94 Nambu pistol and an ammunition pouch for the Type 99 light machine gun. Four Type 30 bayonets in scabbards and five pairs of goggles are also included. The officer is supplied with a map case, a binocular case and a sword.
The kit contains 57 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Pz.Kpfw. III Ausf. C
£48.00 GBP
Miniart 1:35 - Pz.Kpfw. III Ausf. C - Plastic Figure Model Kit #35166
The Panzerkampfwagen III, widely known as the Panzer III, was a German medium tank produced by the Daimler-Benz AG in the 1930's. According to the Army Weapons Department plans, the Panzer III was aimed to serve as the main battle tank of the German Panzer divisions. It was meant to fight enemy tank forces with the support of the Panzer IV which was intended to neutralise anti-tank guns.
The Panzer III was able to reach speeds up to 40 km/h by road and 20 km/h off road. Its armament included one 37 mm KwK 36 L/45 cannon and two 7.92mm MG34 machine guns. Compared to its successors, the Ausf. G and Ausf. J, the Panzer III featured a relatively thin armour (15 mm). It had space for five crew members.
When the Soviet T-34 first appeared on the battlefield, the Germans saw the urgent need for a more powerful anti-tank gun. The decision was made to redesign the Panzer IV as it had more potential for further development. The Ausf. C soon became outdated and its production ended in 1943. The tank was deployed in several German campaigns of the early war period including the September Campaign in Poland, the Fall of France and Operation Barbarossa.
The kit contains 1047 plastic parts. It is the first plastic model of the Pz. Kpfw. III Ausf. C.
Box: 380mm x 240mm x 60mm
Additional:
- 1171 total details
- 1047 plastic parts
- 63 photo etched parts
- 11 clear plastic parts
- Decals sheet for 5 options
- Full-colour instruction
- Fully detailed interior of turret
- Crews vision periscopes with clear plastic parts
- All hatches can be assembled open or closed
- Workable chassis and track link
Miniart 1:35 - Schweres Wurfgerät 40
£20.00 GBP
Miniart 1:35 - Schweres Wurfgerät 40 - Plastic Figure Model Kit #35273
The Schweres Wurfgerät 40 (sWG 40) was a wooden launch frame used by Germany during WWII, for 28 and 32 cm rockets. The rockets were mounted on the sWG 40 in groups of four.
Kit details:
- Realistic wooden pattern
- Decal sheet included
- 2 types of rockets included: 28cm WK Spr & 32cm WK Flamm
Download instructions for this kit here
The kit contains 204 parts.
Includes parts for five figures, a Schweres Wurfgerät 40 and 28/32cm rockets.
Box: 290mm x 190mm x 45mm
Miniart 1:35 - Stug. III 0-Series
Sold Out
Miniart 1:35 - Stug. III 0-Series - Plastic Model Kit #35210
The German Sturmgeschütz III or StuG III assault gun was the country's 2nd most produced AFV of the WWII period (after the Sd Kfz 251). The StuG was designed to support the advancing infantry using direct fire. Early models were equipped with low-velocity 7.5 cm StuK 37 L/24 guns which were able to blast fortifications but could not penetrate armour well. After the Germans encountered the Soviet KV-1 and T-34 tanks those were substituted with high-velocity 7.5 cm StuK 40 L/43 and later 7.5 cm StuK 40 L/48.
Before the production began, five prototypes of the vehicle were produced in 1937 - the experimental '0' series. They used the chassis and running gear of the Panzer III and featured a mild-steel superstructure and Krupp’s 7.5cm StuK 37 L/24 cannon. These AFVs were tested at a number of training facilities and remained in use as training vehicles until 1942.
Box: 386mm x 240mm x 60mm
Additional:
- Highly detailed model
- Clear parts included
- PE parts included
- Workable tracks included
- Accurate gun 7.5cm StuK 37 L/24
- All hatches can be positioned open or closed
- Decal sheet for 3 variants
Download instructions for this kit here
Miniart 1:35 - Totenkopf Division ( Kharkov 1943 )
Sold Out
Miniart 1:35 - Totenkopf Division ( Kharkov 1943 ) - Plastic Model Kit #35075
On the 19th of February 1943, the II SS Panzer Corps and two panzer armies under the command of Field Marshal Erich von Manstein launched their counterstrike on the Eastern Front, aimed to recapture Kharkov and Belgorod. With extensive air support from Luftflotte 4, in two weeks the German Army defeated the Red Army south of Kharkov and was able to directly engage the city on the 11th of March. After four days of house-to-house fighting, Kharkov was recaptured by the 1st SS Panzer Division on March the 15th. This series of battles is known as the Third Battle of Kharkov, which cost the Red Army over 80,000 casualties. Bevin Alexander, a military historian, called the Third Battle of Kharkov "the last great victory of German arms in the Eastern Front".
This kit contains models of five figures: Totenkopf Division ( Kharkov 1943 ) & Weapons and Equipment
Miniart 1:35 - WWII Drivers
Sold Out
Miniart 1:35 - WWII Drivers - Plastic Figure Model Kit #35042
The kit represents six drivers of WWII era: two Germans, two Soviets, one American and one British. A variety of figure positions (including a traditional sitting pose) makes the kit perfect for dioramas featuring all kinds of WWII vehicles. It can also be a great addition to a single finished model.
The kit contains 48 parts.
Includes parts for six figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Battle of the Bulge, Ardennes 1944
Sold Out
Miniart 1:35 - Battle of the Bulge, Ardennes 1944 - Plastic Figure Model Kit #35084
The Battle of the Bulge (16 December 1944 – 25 January 1945) was a major German offensive campaign launched through the densely forested Ardennes region of Wallonia in Belgium, France, and Luxembourg on the Western Front toward the end of World War II in Europe.
The surprise attack caught the Allied forces completely off guard. The Germans attacked a weakly defended section of the Allied line, taking advantage of heavily overcast weather conditions, which grounded the Allies' overwhelmingly superior air forces. Fierce resistance on the northern shoulder of the offensive around Elsenborn Ridge and in the south around Bastogne blocked German access to key roads to the northwest and west that they counted on for success. Columns of armour and infantry that were supposed to advance along parallel routes found themselves on the same roads. This and terrain that favoured the defenders threw the German advance behind schedule and allowed the Allies to reinforce the thinly placed troops. Improved weather conditions permitted air attacks on German forces and supply lines, which sealed the failure of the offensive. In the wake of the defeat, many experienced German units were left severely depleted of men and equipment, as survivors retreated to the defenses of the Siegfried Line.
The Germans' initial attack included 406,000 men, 1,214 tanks, tank destroyers, and assault guns, and 4,224 artillery pieces. These were reinforced a couple weeks later, bringing the offensive's total strength to around 450,000 troops. Between 67,200 and 125,000 of their men were killed, missing or wounded. For the Americans, with 610,000 involved in the battle, of whom 89,000 were casualties, including up to 19,000 killed, it was the largest and bloodiest battle fought by the United States in World War II.
The kit contains 47 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Armoured Car Crew WWII
£10.00 GBP
Miniart 1:35 - German Armoured Car Crew WWII - Plastic Figure Model Kit #35072
The kit contains 49 parts for the assembly of five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Artillery Tractor T-70 & 7.62cm Gun FK288 w/Crew
£43.00 GBP
Miniart 1:35 - German Artillery Tractor T-70 & 7.62cm Gun FK288 w/Crew - Plastic model kit #35039
Using captured or foreign produced equipment was a standard practise of the German Army since before the war, and the T-70 was no exception. The German designation for the T-70 was " Pz. Kpfw. T-70 743(r) " and was used mainly for reconnaissance and 'Internal Police Duties'. Some T-70's were used as ammunition, supply, or artillery tractors.
Ex-soviet 7.62cm FK288(r) (ZIS-3) guns were used by the 2., 3., 4., and 6. Batteries of the 16. Luftwaffenfelddivision (air force field division).
The kit contains 584 parts.
Includes parts for artillery tractor, limber, gun, five figures, and 42 photoetched parts.
Paints Required:
VAL950 - Black
VAL815 - Skintone
VAL920 - Grey Green
VAL894 - Field Green
VAL846 - Rust
VAL863 - Gun Metal
VAL825 - Brown
VAL998 - Bronze
VAL864 - Steel
VAL999 - Copper
VAL913 - Wood
VAL975 - Dark Green
Miniart 1:35 German Field Gun FK39 (r) 7.62cm
Sold Out
Miniart 1:35 - German Field Gun FK39 (r) 7.62cm - Plastic model kit #35104
The German FK39 (r) was formerly a Russian piece, designed to replace the aging 76mm M1902/30 series and formally adopted by the Red Army in 1939. The initial production covered the bare requirements of the Red Army, but when the Operation Barbarossa started Soviet factories had to begin production in much greater numbers. Those Soviet guns that fell into German hands were turned against their former owner and were designated the 7.62cm FK39(r). The Germans modified the gun to use Pak 36 (r) ammunition.
Includes parts for one gun, four ammo boxes with shells, and photo etched parts.
Box: 290mm x 190mm x 45mm
Miniart 1:35 German Grenades & Mines Set
Sold Out
Miniart 1:35 - German Grenades & Mines Set - Plastic Model Kit #35258
This kit includes German grenades and mines with ammo boxes and Molotov cocktails in a wooden box.
The kit contains 125 parts:
- 113 plastic parts
- 40 clear parts
- 12 PE parts
Decal sheet included.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Infantry Weapons and Equipment
£13.75 GBP
Miniart 1:35 - German Infantry Weapons and Equipment - Plastic Model Kit #35247
This kit includes parts for German infantry weapons and equipment.
Contents:
Arms: Walther G41 Semi-automatic rifle, Rifle 98k, Kar 98k Sniper Rifle w/Zf4 Scope, Selective-fire Automatic Rifle FG 42, MP 44 Assault Rifle, Submachinegun ERMA (EMP), Bergmann MP 34, Maschinenpistole MP 28, Maschinenpistole MP 40, Browning HP 35, Astra 600/43, Walther P 38, Luger P 08, Flare Pistol, Bayonet and Scabbard, Bayonet
Accessories: Binoculars, Case for binoculars, Browning holster, Astra holster, Walther holster, Walther holster opened, Luger holster, Flare pistol pigskin case, Flare pistol holster, Canteen and cup, Bread pouch (bag), Gas mask container, Map case, Cooking pot model 31, Cartridge belt, Cartridge belt Model 33 for Kar 98k, Cartridge belt for FG 42, Magazine pouches for MP 44, Cartridge belt for ERMA, Cartridge belt for MP 34, Cartridge belt for MP 28, Cartridge belt for MP 40, First-aid kit, Foldable spade, Shovel (Entrenching tool)
Other: 1/35 scale German maps, 1/35 scale German magazines
Kit details:
- 179 parts
- 114 plastic parts
- 65 photo-etched parts
- Decals included
- Box: 260mm x 162mm x 35mm
Download instructions with a full list of content here
Miniart 1:35 German Jagdpanzer SU-76(r) w/Crew
Sold Out
Miniart 1:35 - German Jagdpanzer SU-76(r) w/Crew - Plastic model kit #35053
It was common for the German army to use captured vehicles in battle. The SU-76 was a Soviet self-propelled gun used during and after World War II. Its German designation was Jagdpanzer SU-76. The SU-76 was based on a lengthened and widened version of the T-70 light tank chassis. Its simple construction made it the second most produced Soviet armoured vehicle of World War II, after the T-34 tank.
The SU-76M virtually replaced infantry tanks in the close support role. Its thin armour and open top made it vulnerable to antitank weapons, grenades, and small arms. Its light weight and low ground pressure gave it good mobility.
The kit contains 588 parts.
Includes parts for one tank and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 German Pz. Kpfw T-70 743 (r) w/Crew
Sold Out
Miniart 1:35 - German Pz. Kpfw T-70 743 (r) w/Crew - Plastic model kit #35026
Using captured or foreign produced equipment was a standard practise of the German Army since before the war, and the T-70 was no exception. The German designation for the T-70M was " Pz. Kpfw. T-70 743(r) " and was used mainly for reconnaissance and 'Internal Police Duties'. Some T-70's had their turrets removed, and were used to tow Artillery.
The kit contains 348 parts.
Includes parts for one vehicle and five figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 German Staff Car 170V
£35.00 GBP
Miniart 1:35 - German Staff Car, Mercedes-Benz 170V - Plastic Model Kit #35103
The Mercedes-Benz W136 was Mercedes-Benz's line of inline-four cylinder automobiles from the mid-1930s into the 1950s. The model 170V made its public debut in February 1936. Between 1936 and 1939 it was Mercedes' top selling model. Between 1936 and 1942 over 75,000 were built.
The "V" in the 170 V's was an abbreviation of "Vorn" (front), added to differentiate it from the contemporary rear-engined Mercedes-Benz 170H (W28) ("H" for "Heck", rear) which used the same four cylinder 1697cc engine, but positioned at the back of the car.
Most of the cars produced were two or four door "Limousine" (saloon/sedan bodied cars), but the range of different body types offered in the 1930s for the 170V was unusually broad. A four-door "Cabrio-Limousine" combined the four doors of the four door "Limousine" with a full length foldaway canvas roof.
There was a two door two seater "Cabriolet A" and a two door four seater "Cabriolet B" both with luggage storage behind the seats and beneath the storage location of the hood when folded (but without any external lid for accessing the luggage from outside the car). A common feature of the 170V bodies was external storage of the spare wheel on the car's rear panel.
The kit contains 269 parts.
Includes parts for one German car.
Box: 345mm x 240mm x 60mm
Miniart 1:35 German Tank Crew - Afrika Korps
Sold Out
Miniart 1:35 - German Tank Crew, Afrika Korps - Plastic Figure Model Kit #35141
The German Afrika Korps (Deutsches Afrikakorps) was formed in 1941 with the purpose of assisting Italy in defending its African colonies. The Afrika Korps fought in Africa from 1941 until May 1943 when it surrendered along with other remaining Axis forces in North Africa.
This kit contains parts for the assembly of five German tank crew members. All figures are shirtless and wear tropical DAK shorts. Three of them have a tropical pith helmet on, and the other two - the early war type field side cap.
The kit contains 35 parts.
Box: 260 x 162 x 35 mm
Miniart 1:35 German Tank Crew At Rest
£11.00 GBP
Miniart 1:35 - German Tank Crew At Rest - Plastic Figure Model Kit #35198
The kit contains 58 parts.
Box: 260 x 162 x 35mm
Includes parts for five figures and a pig. Paint and glue are not included.
Miniart 1:35 German tank crew at work
Sold Out
Miniart 1:35 - German tank crew at work - Plastic Figure Model Kit #35010
A typical German tank crew consisted of a commander, a tank driver, gunners and loaders depending on the series of the tank. The total number of crew members also varied from one tank model to another.
The kit contains 40 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German Tank Crew Winter, Special Edition
£14.00 GBP
Miniart 1:35 - German Tank Crew Winter, Special Edition - Plastic Figure Model Kit #35249
This kit contains parts for the assembly of five WWII German tank crew members in winter uniforms. Weapons and accessories are provided.
View instructions and full contents of this kit here
The kit contains 80 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 German tank repair crew Special Edition
Sold Out
Miniart 1:35 - German tank repair crew Special Edition - Plastic Figure Model Kit #35319
The kit contains 36 parts.
Includes parts for five figures and work tools.
Box: 260mm x 162mm x 35m
Miniart 1:35 Leichter Pz.Kpfw. 202(e) with Crew Dingo Mk.I
£32.00 GBP
Miniart 1:35 - Leichter Pz.Kpfw. 202(e) with Crew Dingo Mk.I (Afrika Korps) - Plastic model kit #35082
The Daimler Mk. I, or the 'Dingo', was a British four wheel drive scout car often captured by the Nazis during WWII and renamed Leichter Pz.Kpfw. Mk. I 202(e).
Designed by Birmingham Small Arms Company, the Dingo was produced by Daimler in 1939. It had two man crew and was used as a reconnaissance vehicle. Its key advantages included the special gearbox, which allowed five speeds in both directions, and a four-wheel steering system, which gave a turning circle of 7 m. The Dingo first saw action with British troops in the Battle of France. It remained in British service till 1952 with over 6,000 units produced by that time.
The kit contains 204 parts.
Includes parts for the assembly of one armoured car and three figures.
Box: 345mm x 240mm x 60mm
Miniart 1:35 Panzerfaust 30/60 Set
£17.00 GBP
Miniart 1:35 - Panzerfaust 30/60 Set - Plastic Model Kit #35253
The Panzerfaust was a single shot German anti-tank weapon used from 1943 until the end of WWII. The Panzerfaust 30 weighed over 5 kg and had a total length of 1.045 metres. The warhead contained 0.8 kg of the mixture of TNT (trinitrotoluene) and hexogen explosives in the proportion of 1:1. The warhead was fitted on the launch tube that contained black powder propellant. The tube was discarded after firing which made the Panzerfaust the first disposable anti-tank weapon. The Panzerfaust 60 weighed 6.8 kg and its projectile speed was 45 m/s compared to 30 m/s of the Panzerfaust 30. Effective range of the Panzerfaust 60 was also increased from 30 to 60 m compared to that of the Panzerfaust 30.
This kit includes:
- 16 x Panzerfaust 30 with 4 boxes
- 16 x Panzerfaust 60 with 4 boxes
- Photo-etched parts
- Decals
The kit contains 192 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 Panzerschreck RPzB.54 & Ofenrohr RPzB.43 Set
Sold Out
Miniart 1:35 - Panzerschreck RPzB.54 & Ofenrohr RPzB.43 Set - Plastic Model Kit #35263
The Panzerschreck (tank's bane) was the common name for the Raketenpanzerbüchse (abbreviated to RPzB), an 88 mm calibre reusable anti-tank rocket launcher developed by Nazi Germany in World War II. Another popular nickname was Ofenrohr ("stove pipe").
The Panzerschreck was designed as a lightweight man portable anti-tank weapon and was largely a replica of the US military bazooka. The weapon was shoulder-launched and fired a fin-stabilized rocket with a shaped-charge warhead. It was made in smaller numbers than the Panzerfaust, which was a disposable recoilless gun firing an anti-tank warhead.
Download instructions here.
This kit includes:
- Panzerschreck RPzB.54
- Ofenrohr RPzB.43
- Ammo boxes, backpacks and projectiles
- Photo-etched parts
- Decals
Box: 260mm x 162mm x 35mm
Miniart 1:35 Personenwagen Typ 170V Saloon (Special Edition)
£35.00 GBP
Miniart 1:35 - Personenwagen Typ 170V Saloon (Special Edition) - Plastic model kit #35203
The Mercedes-Benz W136 was Mercedes-Benz's line of inline-four cylinder automobiles from the mid-1930s into the 1950s. The model 170V made its public debut in February 1936. Between 1936 and 1939 it was Mercedes' top selling model. Between 1936 and 1942 over 75,000 were built. Most of the cars produced were two or four door "Limousine" (saloon/sedan bodied cars).
The "V" in the 170 V's was an abbreviation of "Vorn" (front), added to differentiate it from the contemporary rear-engined Mercedes-Benz 170H (W28) ("H" for "Heck", rear) which used the same four cylinder 1697cc engine, but positioned at the back of the car.
The kit contains 267 parts.
Includes parts for the assembly of one vehicle and one figure.
Box: 345mm x 240mm x 60mm
Revell 1:35 Armoured Scout Vehicle P204 (f)
Sold Out
Revell 1:35 - Armoured Scout Vehicle P204 (f) - Plastic Model Kit #03259
The Panhard 178 or "Pan-Pan" was a French four-cylinder armoured car designed for the French Cavalry in 1932 and aimed to function as a long-range scout vehicle. It had room for four crew members and was fitted with 25 mm armament and 7.5 mm machine gun.
As a reconnaissance car, the Panhard 178 was rather small, only 4.8 m long and 2.3 m high. Despite its weight of over 8 tonnes, the vehicle was still able to reach speeds of over 70 km/h. However, its off-road speed was limited to 42 km/h.
At the outbreak of the Second World War a number of Panhards were captured by German troops and renamed Panzerspähwagen P204 (f). In 1941 at least 190 units were manufactured for use in Operation Barbarossa.
The Panhard 178 design was considered advanced for its time and remained modern long after the war. It was the first four-cylinder armoured car mass-produced in France.
Total parts: 158
Skill Level: 4
Release date: 01/2017
Includes:
- Rotating turret with detailed interior
- Representation of the driving position and engine
- Rubber tyres
- Authentic decal set for following versions: Wehrmacht, Operation Barbarossa, Eastern Front, Russia, 1941-1942 and Wehrmacht, Anti-Partisan Role, France, 1944
Revell 1:35 German Staff Car Type 82E
Sold Out
Revell 1:35 - German Staff Car Type 82E - Plastic Model Kit #03247
The German Staff Car Type 82, also known as Volkswagen Kübelwagen, was a light combat vehicle developed by Ferdinand Porsche and produced by Volkswagen during World War II for the needs of the German armed forces.
The first prototype designed in 1938 was designated Type 62. Due to its light weight and strong off-road characteristics, the vehicle was approved for further development. In 1939 first pre-production models were put to the test during the invasion of Poland. In general, the vehicle performed well on the battlefield, however some changes were required. The improvements concerned the lowest speed - it was reduced from 8 km/h to 4 km/h. The new version was named Type 82.
The Type 82 extensive production started in 1940 and lasted till the end of the war. A few modified models appeared during that period including Type 82E. It had the traditional Volkswagen Beetle body instead of the box-shaped standard one. Also, the Type 82E was powered with the air-cooled flat 4-cylinder engine.
By the end of the production in 1945, over 50 thousand Kübelwagen vehicles were built. Type 82 is considered one of the most useful and dependable vehicles of WWII.
Total parts: 66
Skill Level: 4
Length: 112mm
Includes:
- A single-piece body
- Fully detailed interior
- Three sets of decals
Revell 1:35 Sd.Kfz. 184 Tank Hunter "Elefant"
Sold Out
Revell 1:35 - Sd.Kfz. 184 Tank Hunter "Elefant" - Plastic Model Kit #03254
The Elefant was a heavy tank destroyer produced by the Porsche car company in 1943. The initial version was named "Ferdinand" after its designer Ferdinand Porsche.
The Ferdinand was modified after its debut in the Battle of Kursk during which a number of flaws were revealed. The improvements mainly concerned the construction of the tank and its armament. The vehicle was supplemented with a commander's cupola and a layer of front armour. Also, it was additionally armed with a MG 34 machine gun and covered with Zimmerit. The advanced model was renamed "Elefant". Officially it was known as Panzerjäger Tiger (P) or Sd.Kfz. 184.
Today one of these vehicles is on show at the Kubinka Tank Museum in Russia, and another belongs to the United States Army Ordnance Museum. These two tanks are the only samples of the series that survived the war.
Total parts: 238
Skill Level: 4
Appearance date: 01/2017
Includes:
- Easy-to-assemble vinyl tracks
- Elevating gun
- Turret hatches can be mounted in the open or closed position
- Kit contains three figures
- Authentic decal set for following versions:
1st Company of the 653rd Heavy Panzerjäger Battalion, Soriano al Cimino, Italy, 27/06/1944
2nd/3rd Company of the 653rd Heavy Panzerjäger Battalion, Eastern Front, Russia/Poland, 1944
Revell 1:35 Tiger II Ausf. B (Henschel Turret)
£27.00 GBP
Revell 1:35 - Tiger II Ausf. B (Henschel Turret) - Plastic Model Kit #03249
Tiger II was a German heavy tank of the Second World War officially designated the Panzerkampfwagen Tiger Ausf. B. Based on the Tiger I, the Tiger II combined the thick armour of its predecessor and the armour slope of the Panther medium tank. The maximum thickness of its front armour was 185 mm and the weight reached 70 tonnes. The armament consisted of the long barrelled 8.8 cm KwK 43 L/71 gun which proved to be efficient against all Allied tanks.
The initial design of the Tiger II was developed in 1937 by the Henschel company. It featured a hull with sloped armour, a rear-mounted engine and overlapping steel-tired road wheels, 80 cm in diameter. Another design was developed by Porsche in 1939, but it was declined due to large production costs.
The Tiger II first saw combat during the Battle of Normandy in 1944. On the Eastern Front it was first used by the 501st Heavy Panzer Battalion. Fortunately for the Allies, German plants suffered great losses because of the Allied bombing, so a relatively small number of Tiger II's were built. Mass production ran from 1944 to the end of the war and only 492 units were produced during that period.
Kit details:
- Total parts: 250
- Skill Level: 4
- Length: 293mm
- Chassis with torsion bar suspension and easy to mount tracks
- Rotating turret and elevating gun
- Hatches that can be mounted open or closed
- Two sets of decals
Tamiya 1:35 - German Heavy Tank Destroyer Elefant
Sold Out
This is a 1/35 scale plastic model assembly kit of the German Heavy Tank Destroyer Elefant.
Length: 236mm, Width: 97mm
The imposing form of the Elefant, including its 8.8cm gun and large fighting compartment, has been accurately reproduced based on a thorough study of an actual museum example. One-piece fighting compartment is made via slide moulding technique. The main gun, engine grilles, and detailed suspension are designed to ensure easy assembly. The tracks feature one-piece straight sections with realistic sag effect.
Kit comes with commander, loader, and driver torso figures. 3 marking options included to depict vehicles deployed to the Italian and Eastern fronts.
The German heavy tank destroyer Elefant was armed with a powerful 8.8cm L/71 gun which could knock out T-34 tanks at a distance of 2,000m, protected by armour up to 200mm thick, and equipped with advanced features such as a hybrid drivetrain. It had its roots in the Porsche-designed Ferdinand, which was first deployed into combat during the Battle of Kursk in 1943. The lessons learned from that battle resulted in modifications including the addition of a commander's cupola, a machine gun for infantry defence, and better tracks and the enhanced vehicle received the new designation Elefant in February 1944. Elefants were deployed to Italy and the Eastern Front, where they continued to defend against Allied forces until the final skirmishes of the war.
Tamiya 1:35 - German Panther Type G Tank Steel Wheel
Sold Out
The German Panther tank was produced from 1943 until the end of WWII and deployed on the Eastern and Western Fronts in Europe. The tank was developed as a replacement for the Panzer III and Panzer IV tanks and was intended to counter the Soviet T-34. The Panther had a powerful 700hp Maybach engine and a turret placed far back on the hull mounting a 75mm L/70 cannon. The Panther's excellent firepower and protection made it one of the best tanks of World War II. The Panther was easier to produce and maintain than the Tiger I, but it is often considered to be as effective as the latter. The Ausf.G included versions with heater unit installed over the left engine fan, and with lower lip piece added to the mantlet to eliminate shot trap.
- Highly detailed static model kit
- Two-part plastic hull with turret
- Authentic 75mm gun
- Detailed flexible tracks
- Parts for making the steel-wheel version
- Anti-aircraft machine gun
- Infrared night viewer
- Extra track links and spikes to mount on the sides of the turret and tank
- Detailed suspension
- Plastic soldier figurine included
- Waterslide decals included
- Detailed instructions
Tamiya 1:35 - German Schwimmwagen Type 166
Sold Out
The Schwimmwagen Type 166 was an amphibious four-wheel drive off-roader produced by Volkswagen and extensively used by German ground forces during WWII. The Type 166 was made smaller than its prototypes in order to improve the vehicle's efficiency, and had a wheel-base of only 200 cm. From 1941 to 1944, over 15,500 Type 166 Schwimmwagen cars were produced, which made the VW 166 the most mass-produced amphibious car in history.
The kit includes parts for the assembly of one vehicle with a driver. Certain accessories pictured are not included.
Trumpeter 1:35 20mm Flakvierling 38 auf Selbstfahrlafette
Sold Out
Trumpeter 1:35 - German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version) - Plastic model kit #01524
The Flak 38 was a German 20mm anti-aircraft gun used throughout WWII which became the most numerously produced German artillery piece of the period. The 20mm Flakvierling 38 auf Selbstfahrlafette (Sd. Kfz. 7/1) was the result of combining the 20mm Flakvierling 38 with four Flak 38 guns and the Sd. Kfz. 7 half-track, to provide greater mobility and firepower. The Sd. Kfz. 7/1 carried 600 2cm rounds on board and 1800 rounds in the towed Sd. Ah. 56 trailer. The guns had the 360 degrees traverse by hand and could be elevated from -10 to +100 degrees. The later versions also included an armoured cab for better protection of the crews. A crew of 10 included a gun commander, eight gunners and a driver.
The first 100 vehicles were produced in 1940-1941 and production continued at a rate of 10 vehicles per month until August 1942, when the monthly rate was significantly increased. Around 800 vehicles were produced by December 1944. From 1942, most vehicles were fitted with lightly armoured driver cabs and a plate to protect the engine compartment. The armour was 8mm thick. These vehicles were issued to Flak units of the Luftwaffe and Panzer units of the German Army. Sd. Kfz. 7/1 units were used to protect armoured units against low flying aircraft but were also successfully used against ground targets.
The kit represents a late version of the Sd.Kfz.7/1 with a 20mm Flakvierling 38. Early versions featured the central circular pivot mounting for the 20mm Flakvierling 38. Later versions had a normal ground mounting fitted to the rear bed which allowed the gun to be easily removed and mounted on the standard Flakvierling Sd. Ah. 52 trailer if necessary.
Item No: 01524
Item Name: German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version)
Scale: 1:35
Item Type: Static Armour
Model Dimensions: Length 312.5mm, Width 69mm, Height 107mm
Total Parts: 859 pcs
Metal Parts: Brass wire
Photo Etched parts: 5 frets
Total Sprues: 20 pcs sprues, 3 rubber tyres and an armoured cab
Paint Schemes: Markings are provided for vehicles in dark yellow with red brown and green camouflage scheme
Release date: 2009-07
Additional:
- New tooled slide-moulded one-piece late type KM m11 mudguard
- Side panels and the top panel of the engine hood can be opened
Trumpeter 1:35 German E-75 (75-100 tons) Standardpanzer
£33.00 GBP
Trumpeter 1:35 - German E-75 (75-100 tons) Standardpanzer - Plastic model kit #01538
The German Entwicklung, or E-series tank designs were intended to replace the existing tanks such as the Jagdpanzer 38(t), Panther Ausf.G and Tiger II. The E-series vehicles were meant to be much simpler and cheaper to produce than their predecessors.
The E-75 Standardpanzer - standard heavy tank - was designed to replace the Tiger II and Jagdtiger. 75 stood for the intended weight of the vehicle - 75 tonnes. The E-75 was to use the Maybach HL 234 engine and due to its heavy weight the vehicle's maximum speed would be around 40 km/h.
The E-75 Standardpanzer shared many components with the E-50 which was intended to replace the Panther and Tiger I. The two vehicles were meant to have the same turret and the 8.8 cm KwK 43 L/71 gun.
Item No: 01538
Item Name: German E-75 (75-100 tons)/Standardpanzer
Scale: 1:35
Item Type: Static Armour
Model Dimensions: Length 351mm, Width 109.5mm
Total Parts: 294pcs
Metal Parts: brass wire
Photo Etched Parts: 1 piece
Film Parts: n/a
Resin Parts: n/a
Total Sprues: 5 sprues, lower hull, upper hull, turret and tracks
Paint Schemes: Wehrmacht
Release Date: 2010-01
Additional:
- The kit consists of 291 parts in light grey plastic and 3 clear parts
- Refined detail
Trumpeter 1:35 German Geschutzwagen Tiger fur 17cm K72
£73.00 GBP
Trumpeter 1:35 - German Geschutzwagen Tiger Fur 17cm K72 - Plastic model kit #00378
In 1942 the decision was made to build a heavy self-propelled gun carrier for the 17cm Kanone 18 based on the chassis of the Tiger II. The vehicle was named the Geschützwagen Tiger. Its total weight including 8 crew members would reach 60 tons. The armour thickness was 30mm at the front and 16mm on the sides. The Geschützwagen's planned top speed was 45km/h on roads.
The first prototype of this vehicle was tested at the end of WWII, but the tank never saw service due to the defeat of Germany. The partly assembled prototype was found by Allied troops in Haustenbeck in 1945.
Item No: 00378
Item Name: German Geschutzwagen Tiger fur 17cm K72
Scale: 1/35
Item Type: Static Armour
Model Dimensions: Length 346.7mm, Width 101.8mm, Height 96mm
Total Parts: 558 pcs
Metal Parts: 2pcs - springs
Photo Etched Parts: 1pcs
Total Sprues: 16pcs
Paint Schemes: German army in green/sand/brown camouflage
Release Date: 2007-08
Additional:
- The kit consists of 556 parts in light grey plastic
- 2 full length vinyl tracks
- Photo etched parts for engine cover - dustproof net
Trumpeter 1:35 German Jagdpanzer 38(t) Hetzer STARR
£37.00 GBP
Trumpeter 1:35 - German Jagdpanzer 38(t) Hetzer STARR - Plastic model kit #05524
The Jagdpanzer 38 (Sd.Kfz. 138/2), later known as the Hetzer ("pursuer/hunter"), was a German light tank destroyer, based on a modified Czechoslovakian Panzer 38(t) chassis, inspired by the Romanian "Mareşal" tank destroyer.
The Jagdpanzer 38 Starr ("Starr" means "rigid" in German) was a simplified version of the Jagdpanzer 38, first built in 1944. It was armed with the 75mm Pak 39 recoilless gun, while the original Hetzer used a traditional 75mm Pak 39 gun. First prototypes of the Hetzer-Starr were equipped with Tatra 928 diesel engines, however later they were replaced with standard engines. Several Hetzer-Starrs were used during the Prague uprising in 1945. Overall 10 vehicles of this type were built, 9 of them were later converted back to the normal Jagdpanzer 38. The remaining prototype was destroyed at the end of the war.
Item No: 05524
Item Name: German Jagdpanzer 38(t) Hetzer STARR
Scale: 1:35
Item Type: Static Kit
Model Dimensions: Length: 204.86mm, Width 78.40mm
Total Parts: 780+pcs
Photo Etched Parts: 1 piece (34 parts)
Total Sprues: 25 sprues, upper hull, lower hull and tracks
Paint Schemes: German Army
Release date: 2011-09
Additional:
- The kit consists of over 780 parts
- Refined detail
- Multi-slide moulded lower hull and upper hull
- 200 individual tracks links
Trumpeter 1:35 German Super Heavy Jagdpanzer E-100
Sold Out
Trumpeter 1:35 - German Super Heavy Jagdpanzer E-100 - Plastic model kit #01596
The Entwicklung series (German for "development"), shortened to E-Series, was a family of late WWII German tanks that were planned to be developed according to a standardised design. This was an attempt to stop the production of extremely complex and mechanically unreliable tanks in favour of cheaper, simpler and more efficient designs. However, the E-Series tanks featured only small modifications in armour and gun power compared to their predecessors which they were intended to replace.
The E-100 was one of the latest tanks of the E-Series. Based on the Tiger-Maus design that combined features of the Tiger II and the Maus, the E-100 prototype was constructed in 1944. However, further development was practically ended right after Hitler had issued the order to stop the Maus project.
Initially, a 75mm coaxial gun similar to the one from the Maus was meant to serve as the vehicle's armament, but later it was decided to choose a 170mm anti-tank gun in order to save more space for the crew and equipment. Another advantage of the 170mm gun was that it could shoot armour piercing projectiles at the range of up to 4 km. The speed of the tank was expected to reach 40 km/h.
Item No: 01596
Item Name: German E-100
Scale: 1:35
Item Type: Static Kit
Model Dimensions: Length: 365.19mm, Width: 127.83mm
Total Parts: 270+
Total Sprues: 7 sprues, lower hull, upper hull and rubber tracks
Paint Schemes: German Army
Release date: 2011-07
Additional:
- The kit consists of over 270 parts
- Refined detail
- Multi-slide moulded lower hull and upper hull
- Rubber tracks with fine detail
- Photo-etched parts included
© 2025 Panzer Models. Prepared by Article.
